You can buy them through PTL in Germany. They are NOT reasonably priced!!
(~$2,500) But I wasn't able to find anything cheaper when we bought ours!
PTL Dr. Grabenhorst GmbH
Industriestraße 15
D-8652 Stadtsteinach
Germany
If you can't come up with a Phone number, let me know and I'll dig in our
Very interesting. I did not know this. Where is this stated in the
standard, or elsewhere, and how exactly is this enforced?
Tania Grant, Lucent Technologies, Octel Messaging Division
tgr...@lucent.com
__ Reply Separator
It is my understanding that shielded power cords are not allowed on
products in European markets. As I recall, the rationale is that if a
cord is replaced, there is no guarantee that it can, or will, be
replaced with a shielded cord.
-Original Message-
From: Bob Blank
Before my question, I'd like to say that the responses I've received so
far were prompt and in-depth; this is an invaluable resource, excellent
work!
Can anyone suggest a document (official or unofficial) which provides an
overview of the European standard-making bodies and how they are
Seeking source for shielded power cords to meet CE mark requirements.
Prefer braided shield (80% tinned copper) instead of foil
18/3, CEE color coding, 10A, 125 V, PVC jacket, 9'10 long
should have female connector PH-30 (angled IEC 320) molded on
Should meet any other specs required for CE
Can anyone tell where where I can find a reasonably priced IEC Spray
Nozzle as specified in figure 5 of IEC 529?
Thanks in advance
Darrell Locke
Advanced Input Devices
Hi;
Eur-Op News reports that the OJ is now available in CDROM.
Three US sources are listed:
Bernan Associates (800-274-4447)
European Document Research (202-785-8594)
PSI-USA (303-277-1137)
I called Bernan and their price is $830 plus 6% for shipping
and handling = $879.80 for one
Anco in Boulder, CO does seismic testing their address and Phone
As several people have asked me what I found out regarding seismic testing
here is a list of companies to talk to (i haven't spoke to all of them).
What I know know is that certain sites require an installation to be signed off
unsubscribe emc-pstc m...@phihongusa.com
Hi
Is there anyone in the EMC field working in or around Vancouver Canada.
Im probably be going on a short trip there in February and would be
intrested to
see the market in that part of the world.
Best wishes
Petter Gardinemail: petter.gar...@enator.se
ENATOR Communications AB
The issues I'm am raising is exactly language, but language WITHIN the
specification. ie dated references to ENVs in the generic specification
[the issue !]
If I spell foreword or forward wrongly on TREG big deal, but the
standard committee have gone and put a dated reference to an ENV which does
To All,
What domestic and international product safety and EMC requirements
would laboratory equipment used for diagnostic applications fall
under?
This equipment may be located in a hospital, yet it would not be
patient connected or in the same room as
Hi from Montreal
Question: For a product (flight simulator) which would seem to be in
the light industrial category, does EMC (CE) certification through the
TECHNICAL CONSTRUCTION FILE path require NOTIFIED BODY or COMPETENT BODY
involvement?
Thanks
Ed Janzen
EMC Engineer
CAE Electronics
Does anyone have any information or source regarding a fire service ratings
for siren systems.
Sandy
Dear Andy,
Please refer to the following for your information.
I got this information through this emc-pstc few weeks ago.
Good luck to you.
CCEE (China Commission for Conformity Certification)
Tel : 86-1068336219
Fax : 86-1068360907
SAIC (State Administration of Import and Export Commodity
PSNet
IEC 201-1: 1992 1997. as well as EN 60204...
Clause 4.3 (continues) to specify the usual general requirements
to be expected from the power delivered to the UUT by a power utility. The
equipment is expected to operate under these conditions. This means that
these
Benoit Nadeau wrote:
Bonjour de Montreal,
I am presently looking for an outside test laboratory that is capable
of
performing a Normalized Site Attenuation test according to the latest
version of CISPR22, ANSI C63.4 and the 1997 edition of the VCCI
requirements (with a 80 MHz tuned dipole
-- Forwarded message --
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 21 Jan 1998 15:08:24 -0800 (PST)
From: m...@global.california.com
To: John Harrington jharring...@ktl.co.uk
Subject: Re: Strange specification
On Wed, 21 Jan 1998, John Harrington wrote:
Dear all
We
who emc-pstc
Andy,
Try the CCEE (China Commission for Conformity Certification of
Electrical Equipment)
Telephone # +86(10)68336219
Fax# +86(10)68360907
Good luck
Joe Martin
EMC/Product Safety Engineer
P.E. Applied Biosystems
20 matches
Mail list logo
