On Mon, 7 Apr 2014 13:15:08 +,
Paasche, Dieter dieter.paas...@christiedigital.com wrote:
Are there any news about what is FCC going to do? As it stand right now (and
I do have an official answer) H patterns are required by the FCC. Which
means by some international companies double
There is a phenomena that is sometimes seen during the Radiated Immunity Test
(IEC61000-4-3) where the EUT will fail as the frequency changes to the next
step but if you dwell on that frequency and turn the RF on and off it doesn't
fail.
From previous discussions on this email group some
I seem to have difficulty locating a copy of Directive 2008/68/EC Inland
Transport of Dangerous Goods. This document is referenced by Directive
2010/35/EU Transportable Pressure Equipment (TPED). A related document is
Directive 93/23//EC Pressure Equipment Directive (PED). I have an
In message
64D32EE8B9CBDD44963ACB076A5F6ABB0268DF76@Mailbox-Tech.lecotech.local,
dated Thu, 10 Apr 2014, Kunde, Brian brian_ku...@lecotc.com writes:
There is a phenomena that is sometimes seen during the Radiated
Immunity Test (IEC61000-4-3) where the EUT will fail as the frequency
changes
With regard to determining whether the gas is Class 2 or not (as required by
the TPED), the UN ADR is essentially equivalent to the relevant annex of the
Inland Transport of Dangerous Goods. Ref
http://www.unece.org/trans/danger/publi/adr/adr2013/13contentse.html
Regards,
Lauren Crane
In message
92aded8653d74e889981536852f95...@blupr01mb147.prod.exchangelabs.com,
dated Thu, 10 Apr 2014, Rick Busche rick.bus...@qnergy.com writes:
I seem to have difficulty locating a copy of Directive 2008/68/EC
Inland Transport of Dangerous Goods.
Google knows where it is.
Not answering the question, but may be helpful:
The TPED is seen as the more stringent set of requirements. Conventionally, a
Pi marked (i.e. TPED compliant) vessel may be installed in a CE marked pressure
assembly without need for separate certification (CE marking) under the PED.
The reverse
We have been conditioned to accept the magic of automated controls and the
digital mindset. Commanding a signal source to step through a series of
frequencies, we expect that the resultant RF field will be as clean and
predictable as our logic. It's easy to overlook that when a synthesized
signal
8 matches
Mail list logo