A radio module (GSM/GPRS/EDGE) is tested according to a range of standards,
which are listed in RTTE OJ.
Then this radio module is installed into a non-radio ITE (EMC and LVD apply
only).
Question:
The final product is now a radio product and the DoC shall refer to RTTE
1999/5/EC only.
When
Hello Amund,
Yes, I would say that you do need to list the module's radio standards on the
DoC of the final product.
After all, the person putting the final product on the market is effectively
using those standards to state compliance of their new radio product.
Those standards are used to
Additionally, you should have a copy of the current reports associated with
those standards from the radio module manufacturer for you to declare
compliance of your CE marked product.
Best regards,Ron PickardSent from my smartphone
-- Original message--From: Michael
Yes we have the latest copy.
Thanks
Ron
From: Ron Pickard (RPQ) [mailto:rpick...@rpqconsulting.com]
Sent: Monday, June 01, 2015 11:10 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] DoC on final product
Additionally, you should have a copy of the current reports associated with
those
In message
OF6B4772A0.13A58D13-ON88257E57.006A644B-88257E57.006B1707@US.Schneider-E
lectric.com, dated Mon, 1 Jun 2015, McDiarmid, Ralph
ralph.mcdiar...@schneider-electric.com writes:
{[ I think I may have not received an earlier (first?) post in this
thread.]
13 Leakage current and
IEC 60335-1
13 Leakage current and electric strength at operating temperature
Protective Impedance and radio interference filters are to be disconnected
before carrying out the tests.
I suppose they are merely checking for an obvious no-no, like using
accessible chassis metalwork as a
Hi Ralph:
The protective impedance leakage current is
separately measured (8.1.4). The protective
impedance is connected between a live part and an
accessible conductive part, not to earth.
Leakage current and electric strength is
measured from each pole of the supply across
One day before the impementation!
http://transition.fcc.gov/Daily_Releases/Daily_Business/2015/db0601/FCC-15-61A1.txt
Best regards, Dave
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list.
8 matches
Mail list logo