Re: [PSES] Compliant needle-flame test material vs V-0 material

Hello Scott I do not understand. If you have a product intended for connection to mains with available power less than 4000VA, V-0 material for fire enclosure is sufficient without any additional testing. Needle flame is verification test and cannot be compared to flammability rating test. So

Re: [PSES] Compliant needle-flame test material vs V-0 material

Hi Scott: The answer to your question: “is it possible the V-0 material does not meet the needle-flame test?” is: Yes. See: https://www.caplinq.com/blog/ul-94v-certification-vs-ul-94-vtm-certification_190/ Best regards, Rich From: Scott Xe Sent: Tuesday,

Re: [PSES] Are Australia/New Zealand approvals needed for IEC 60320 Appliance Inlet ?

This is subtle. If you’re selling appliance connectors as components in the Au/NZ market, they are likely treated differently than those appliance connectors that are only sold as part of equipment.  Mike Sherman  Sherman PSC LLC On 04/18/2023 11:31 AM Scott

Re: [PSES] Are Australia/New Zealand approvals needed for IEC 60320 Appliance Inlet ?

Be careful. Appliance connectors are AU Level 3 equipment . You can find the full list in AS/NZS 4417.2 . On Tue, Apr 18, 2023 at 9:27 AM Ryan Jazz

Re: [PSES] Are Australia/New Zealand approvals needed for IEC 60320 Appliance Inlet ?

Hello List Members, An update that the NRTL withdrew their request for the "Australia/NZ" approvals document for the appliance inlet The IEC certificate was acceptable. Sincerely, Ryan Jazz Ryan Jayasinghe Regulatory Compliance Engineer rjayasin...@line6.com "After

[PSES] Compliant needle-flame test material vs V-0 material

According to EN 62368-1 : 2020 + A11 : 2020 - Cl 6.4.8.4 Smaller distances are allowed provided that the part of the fire enclosure or fire barrier within the required separation distance complies with one of the following: • the fire enclosure or fire barrier meets the needle-flame test

[PSES] AW: [PSES] Are Australia/New Zealand approvals needed for IEC 60320 Appliance Inlet ?

Hi Ryan, If the national adoption of the IEC standard contains modifications, you need a CB report that approves compliance with these national deviations. According to the Australian Standards website, IEC 60320-1 has been adopted there with national modifications (AS/NZS 60320.1-2012 -