Group,
We are using an HP 8561E to perform the magnetic emission test per EN
55103-1. HP says they do not have any other instrument to support this
test. Is anyone using a different instrument?
Dale.
---
This message is from the IEEE EMC Society
Group,
I am in the process of evaluating an EMI analysis tool. The program is
Quiet Expert by Innoveda (formally Viewlogic as I understand it). Is
anyone using this program or have you evaluated it along with others?
Dale
---
This message is from
the group. Unfortunately, most
senior staff at Keytek involved in the development of the system have left.
If anyone knows of whereabouts, please email. Also if anyone has a contact
at Schaffner or Haefely.
Best Regards,
Dale Albright
-Original Message-
From: wo...@sensormatic.com
the group. Unfortunately, most
senior staff at Keytek involved in the development of the system have left.
If anyone knows of whereabouts, please email. Also if anyone has a contact
at Schaffner or Haefely.
Best Regards,
Dale Albright
-Original Message-
From: wo...@sensormatic.com
, and some were
routed in Telcordia cable tray fashion. The highest deviation was 4.2 dB.
Regards,
Dale Albright
- Original Message -
From: wo...@sensormatic.com
To: umbdenst...@sensormatic.com; da...@emclabs.com
Sent: Wednesday, January 12, 2000 2:41 PM
Subject: RE: Chamber and OATS
cables are involved, correlation goes down. Our next run will include
the several positions on the OATS also.
Best Regards,
Dale Albright.
- Original Message -
From: umbdenst...@sensormatic.com
To: mmate...@foxboro.com; barry...@altavista.com
Cc: emc-p...@majordomo.ieee.org
Sent
. The suggested
text is given in the Annex of ICES-003 . This Class (A or B) digital
apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Best Regards,
Dale Albright
President
EMC International, Inc.
-Original Message-
From: George Waters gwat
Ron,
I have used TILE (Totally Integrated Laboratory Environment) for almost 5
years. It is an outstanding package for automation. I have dealt with just
about every vendor in the EMI business, and Quantum Change (Mike Hart and
Bill Scheer) have exceeded, by far, the best technical and product
. If
international time is a problem and you need it now, I will be happy to make
the call. You may contact me if desired by phone or email.
Regards,
Dale Albright
President EMCI
919-554-0901
da...@emclabs.com
-Original Message-
From: Pierre Selva actionsmesu...@compuserve.com
Thanks Andy.
Dale.
-Original Message-
From: Dale Albright da...@emclabs.com
To: Gorodetsky, Vitaly vgorodet...@canoga.com; Linstrom, John (IndSys,
GEFanuc, CDI) john.linst...@cdynamics.com; emc-p...@ieee.org
emc-p...@ieee.org
List-Post: emc-pstc@listserv.ieee.org
Date: Monday, November
: Gorodetsky, Vitaly vgorodet...@canoga.com
To: 'Dale Albright' da...@emclabs.com; Linstrom, John (IndSys, GEFanuc,
CDI) john.linst...@cdynamics.com; emc-p...@ieee.org emc-p...@ieee.org
List-Post: emc-pstc@listserv.ieee.org
Date: Thursday, November 04, 1999 9:05 PM
Subject: RE: Telecom reqs.
Dale
John,
Yes. EN 300 386-1 and EN 300 386-2 - Electromagnetic compatibility and Radio
spectrum Matters (ERM); Telecommunication network equipment; Electromagnetic
Compatibility (EMC) requirements.
The requirements are based on the installation environment and category of
equipment within the
get further info you can call our lab 919-554-0901.
Regards,
Dale Albright
President
EMC International, Inc.
-Original Message-
From: chasgra...@aol.com chasgra...@aol.com
To: emc-p...@ieee.org emc-p...@ieee.org
List-Post: emc-pstc@listserv.ieee.org
Date: Wednesday, November 03
that is not intended to be placed in a
cabinet - maybe table-top or open-rack type. Notwithstanding the ultimate
decision being driving by the RBOCs, what do you think? See some of you at
the conference next week.
Regards,
Dale Albright
EMCI
Scott,
I have had good results by applying styrofoam sheets to the walls.
Dale.
-Original Message-
From: Lacey,Scott sla...@foxboro.com
To: 'emc-p...@ieee.org' emc-p...@ieee.org
List-Post: emc-pstc@listserv.ieee.org
Date: Friday, October 01, 1999 6:00 PM
Subject: Coatings for Ferrite
compliant results be repeated when moving the other antenna to the side and
leaving the one on the turntable fixed? Ok that is enough. Now one
suggestion.
Try laying metal sheets or screen over the turntable area to further
conclude the culprit.
Regards,
Dale Albright
EMCI
To
-Original Message
.
If the computer did reboot, take the following action to solve the problem:
Install a UPS to provide power to the computer.
If the computer did not reboot, call Bill Gates and tell him that you just
discoverd yet another one of his alluding Windows bugs!
Best Regards,
Dale Albright
President
EMC
17 matches
Mail list logo