Hello All,
reading this list for some little time now, I would like to know
whether it's suitable or impolite to post the same topic here and in
the sci.engr.electrical.compliance newsgroup or what delay for a
repost in the other group/list is adequate.
After all I wonder what's the priority
Hello All,
how shall conductive cases of a EUT (intended to be mounted to a
grounded metal construction in real life) be connected to the
reference plane during a EN61000-4-6 test: directly, via a resistor
or not at all?
I remember only that (auxiliary?) earth connectors have to be
Hi all,
please help a newbie to understand the intentions of DO-160 lightning tests.
Do I understand this correctly:
All section 22 lightning tests are between the pin and the case of the
equipment unless there is a "Local Ground"?
And "Local Ground" applies *only* if the connection is
Hi all,
the "Guide to application of the Machinery Directive 2006/42/EC",
Edition 2.2: https://ec.europa.eu/docsroom/documents/38022 states:
"...Thus, whilst machinery with an electrical supply, which is not in
any of the categories listed in Article 1(2) (k) of MD, shall fulfil the
safety
Charlie Blackham wrote:
The issue is that the legal bit stating that only the MD applies and not
the LVD is in the MD (below) and not included in the list of exemptions
in Annex II of the LVD
1.5. RISKS DUE TO OTHER HAZARDS
1.5.1. */Electricity supply/*
Where machinery has an electricity
Hi all,
can anyone suggest inverters in the 300..500W range suitable for
"non-industrial" environments, i.e. with low emissions and low leakage
currents (mains plug, RCD compatible)?
Most suppliers seem to only target industrial applications and don't
bother with bench top devices.
TIA Oliver
Dürrer Bernd wrote:
(Annex II of the Machinery Directive point 4)
"a sentence expressly declaring that the machinery fulfils
all the relevant provisions of this Directive and where appropriate,
a similar sentence declaring the conformity with other Directives
Correct.
In my current
7 matches
Mail list logo