[PSES] Fwd: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

[Douglas Nix]

From: Douglas Nix 
Subject: Re: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment 
providing UKCA label deadline extension.
Date: December 7, 2022 at 17:30:26 EST
To: "Stultz, Mark" 

Colleagues,

House of Lords debate on the draft UKCA marking provisional statutory 
instrument is scheduled for 13-Dec: 
https://lordsbusiness.parliament.uk/ItemOfBusiness?itemOfBusinessId=119449=38=2022-12-13


--
Doug Nix
d...@mac.com

“The highest form of ignorance is when you reject something you don't know 
anything about.” ~Wayne Dyer


-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

Re: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

[Richard Georgerian]

Thank-you Mark,

 

.Richard Georgerian

Compliance Engineer

HID Global

 

From: Stultz, Mark  
Sent: Monday, November 28, 2022 8:48 AM
To: Richard Georgerian ;
EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] Link to secondary legislation draft RE: [PSES] SI
amendment providing UKCA label deadline extension.

 

The draft instrument Product Safety and Metrology (Amendment and
Transitional

Provisions) Regulations 2022 was reviewed and approved by the Joint
Committee on Statutory Instruments on 2022-11-23 (

https://committees.parliament.uk/publications/31741/documents/178147/default
/)

 

It now needs to be approved by parliament.  You can track the progress be
checking the daily order paper
(https://commonsbusiness.parliament.uk/Document/61034/Html?subType=Standard#
20221128-287)

As of today, it is still in the "Remaining Orders and Notices" section which
means that it has not yet been scheduled for a vote.

 

Best regards,

 

Mark Stultz | CMSER | Sealed Air | Automated Packaging Systems |
Streetsboro, OH | 330-342-2402

 

From: Richard Georgerian mailto:richa...@mesanetworks.net> > 
Sent: Monday, 28 November, 2022 10:41 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> 
Subject: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment
providing UKCA label deadline extension.

 

 

 CAUTION: This email originated from outside of the organization. Do not
click links or open attachments unless you recognize the sender and know the
content is safe.

 

Greetings all,

 

I have been monitoring the following websites to see when the UKCA
legislation has been implemented regarding the easement of the IUKCA marking
to 31 DEC 2024. Other than the website below advising that it has been
extended to 31 DEC 2024, the actual legislation for the extension cannot be
found.

 

https://www.gov.uk/guidance/using-the-ukca-marking#full-publication-update-h
istory
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.gov.u
k%2Fguidance%2Fusing-the-ukca-marking%23full-publication-update-history
=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C
2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468966940522%7CUnknown%7CTW
FpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D
%7C3000%7C%7C%7C=OADfSMBXzH9xjNAZY8GaU7LgHug%2FuQmNF9uEpS3J58k%3D
rved=0> : advising that it has been extended to 31 DEC 2024. (However, the
actual legislation for the extension cannot be found.)

 

https://www.legislation.gov.uk/primary+secondary?title=The%20Product%20Safet
y%20and%20Metrology
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.legis
lation.gov.uk%2Fprimary%2Bsecondary%3Ftitle%3DThe%2520Product%2520Safety%252
0and%2520Metrology=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d771
4c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C6380524689
67096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI
6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=h38jw6Hk4csTH0nXthcmLJYX0iX9ba
gPne9tP3hzlsw%3D=0> : lists of all the "The Product Safety and
Metrology " regarding the original implementation of the UKCA marking for 31
DEC 2022, which is still on course if the easement has not yet been passed.

 

https://www.legislation.gov.uk/uksi/2022/1200-1299
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.legis
lation.gov.uk%2Fuksi%2F2022%2F1200-1299=05%7C01%7Cmark.stultz%40sealeda
ir.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd
%7C0%7C0%7C638052468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLC
JQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=osKdTKMcq
mrrjXyhEUiRee8ajW4AcLRZMM2Uuab530M%3D=0> : Shows timeline of all SI
legislations.

 

Thanks in-advance for the assistance.

 

.Richard Georgerian

Compliance Engineer

HID Global

-


This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
mailto:emc-p...@ieee.org> >

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-p
ses.org%2Femc-pstc.html=05%7C01%7Cmark.stultz%40sealedair.com%7Cce08183
9d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C63805
2468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLC
JBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=J1VPMd%2Bmwjy8JLSt3%2BT%2
FSA1GuUljqe7WOlhyWhyXyJg%3D=0> 

Website: http://www.ieee-pses.org/
<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-p
ses.org%2F=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c
08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468967096739
%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMD

Re: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

[Stultz, Mark]

The draft instrument Product Safety and Metrology (Amendment and Transitional
Provisions) Regulations 2022 was reviewed and approved by the Joint Committee 
on Statutory Instruments on 2022-11-23 (
https://committees.parliament.uk/publications/31741/documents/178147/default/)

It now needs to be approved by parliament.  You can track the progress be 
checking the daily order paper 
(https://commonsbusiness.parliament.uk/Document/61034/Html?subType=Standard#20221128-287)
As of today, it is still in the "Remaining Orders and Notices" section which 
means that it has not yet been scheduled for a vote.

Best regards,

Mark Stultz | CMSE(r) | Sealed Air | Automated Packaging Systems | Streetsboro, 
OH | 330-342-2402

From: Richard Georgerian 
Sent: Monday, 28 November, 2022 10:41 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment 
providing UKCA label deadline extension.


 CAUTION: This email originated from outside of the organization. Do not click 
links or open attachments unless you recognize the sender and know the content 
is safe.

Greetings all,

I have been monitoring the following websites to see when the UKCA legislation 
has been implemented regarding the easement of the IUKCA marking to 31 DEC 
2024. Other than the website below advising that it has been extended to 31 DEC 
2024, the actual legislation for the extension cannot be found.

https://www.gov.uk/guidance/using-the-ukca-marking#full-publication-update-history<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.gov.uk%2Fguidance%2Fusing-the-ukca-marking%23full-publication-update-history=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468966940522%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=OADfSMBXzH9xjNAZY8GaU7LgHug%2FuQmNF9uEpS3J58k%3D=0>:
 advising that it has been extended to 31 DEC 2024. (However, the actual 
legislation for the extension cannot be found.)

https://www.legislation.gov.uk/primary+secondary?title=The%20Product%20Safety%20and%20Metrology<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.legislation.gov.uk%2Fprimary%2Bsecondary%3Ftitle%3DThe%2520Product%2520Safety%2520and%2520Metrology=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=h38jw6Hk4csTH0nXthcmLJYX0iX9bagPne9tP3hzlsw%3D=0>:
 lists of all the "The Product Safety and Metrology " regarding the original 
implementation of the UKCA marking for 31 DEC 2022, which is still on course if 
the easement has not yet been passed.

https://www.legislation.gov.uk/uksi/2022/1200-1299<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.legislation.gov.uk%2Fuksi%2F2022%2F1200-1299=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=osKdTKMcqmrrjXyhEUiRee8ajW4AcLRZMM2Uuab530M%3D=0>:
 Shows timeline of all SI legislations.

Thanks in-advance for the assistance.

...Richard Georgerian
Compliance Engineer
HID Global
-


This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
mailto:emc-p...@ieee.org>>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2Femc-pstc.html=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=J1VPMd%2Bmwjy8JLSt3%2BT%2FSA1GuUljqe7WOlhyWhyXyJg%3D=0>

Website: 
http://www.ieee-pses.org/<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2F=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=UTYAIHryCeDichYizne8VFV5uFZcta5w%2Fd6korM1vZM%3D=0>
Instructions: http://www.ieee-pses.org/list.html (including how to 
unsubscribe)<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2Flist.html=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjo

[PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

[Richard Georgerian]

Greetings all,

 

I have been monitoring the following websites to see when the UKCA
legislation has been implemented regarding the easement of the IUKCA marking
to 31 DEC 2024. Other than the website below advising that it has been
extended to 31 DEC 2024, the actual legislation for the extension cannot be
found.

 

https://www.gov.uk/guidance/using-the-ukca-marking#full-publication-update-h
istory: advising that it has been extended to 31 DEC 2024. (However, the
actual legislation for the extension cannot be found.)

 

https://www.legislation.gov.uk/primary+secondary?title=The%20Product%20Safet
y%20and%20Metrology: lists of all the "The Product Safety and Metrology "
regarding the original implementation of the UKCA marking for 31 DEC 2022,
which is still on course if the easement has not yet been passed.

 

https://www.legislation.gov.uk/uksi/2022/1200-1299: Shows timeline of all SI
legislations.

 

Thanks in-advance for the assistance.

 

.Richard Georgerian

Compliance Engineer

HID Global


-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

Re: [PSES] SV: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

[Charlie Blackham]

Amund

At the bottom of this page https://www.gov.uk/guidance/using-the-ukca-marking

Best regards
Charlie

Charlie Blackham
Sulis Consultants Ltd
Tel: +44 (0)7946 624317
Web: https://sulisconsultants.com/
Registered in England and Wales, number 05466247

From: Amund Westin 
Sent: 25 November 2022 08:02
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] SV: [PSES] Link to secondary legislation draft RE: [PSES] SI 
amendment providing UKCA label deadline extension.

Sorry if I have missed that information, but where can I find requirements for 
the UKCA logo which shall be affixed to the product. Need the check out the 
shape, minimum size, etc. Just like the CE logo has requirements.

Thanks!

BR
Amund



Fra: Lauren Crane
Sendt: 16. november 2022 16:41
Til: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Emne: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment 
providing UKCA label deadline extension.

Hello All,

In case you are interested in seeing it is more concretely true, here is a link 
to the secondary legislation laid before parliament that is a proposal to 
modify many (most/all) of the UKCA SI's with the extended date. Click on "full 
wording" top left, to see the draft.

https://statutoryinstruments.parliament.uk/instrument/Iej3CpFt/

Best Regards,
-Lauren

LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any 
documents, files, or previous e-mail messages attached to it, (collectively, 
"E-mail Transmission") may be subject to one or more of the following based on 
the associated sensitivity level: E-mail Transmission (i) contains confidential 
information, (ii) is prohibited from distribution outside of Lam, and/or (iii) 
is intended solely for and restricted to the specified recipient(s). If you are 
not the intended recipient, or a person responsible for delivering it to the 
intended recipient, you are hereby notified that any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
message is STRICTLY PROHIBITED. If you have received this transmission in 
error, please immediately notify the sender and destroy the original 
transmission and its attachments without reading them or saving them to disk. 
Thank you.


Confidential - Limited Access and Use
-


This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
mailto:emc-p...@ieee.org>>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to 
unsubscribe)<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell mailto:mcantw...@ieee.org>>

For policy questions, send mail to:
Jim Bacher mailto:j.bac...@ieee.org>>
David Heald mailto:dhe...@gmail.com>>



To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1
-


This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
mailto:emc-p...@ieee.org>>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to 
unsubscribe)<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell mailto:mcantw...@ieee.org>>

For policy questions, send mail to:
Jim Bacher mailto:j.bac...@ieee.org>>
David Heald mailto:dhe...@gmail.com>>



To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

[PSES] SV: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

[Amund Westin]

Sorry if I have missed that information, but where can I find requirements
for the UKCA logo which shall be affixed to the product. Need the check out
the shape, minimum size, etc. Just like the CE logo has requirements.

 

Thanks!

 

BR
Amund

 

 

 

Fra: Lauren Crane 
Sendt: 16. november 2022 16:41
Til: EMC-PSTC@LISTSERV.IEEE.ORG
Emne: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment
providing UKCA label deadline extension.

 

Hello All, 

 

In case you are interested in seeing it is more concretely true, here is a
link to the secondary legislation laid before parliament that is a proposal
to modify many (most/all) of the UKCA SI's with the extended date. Click on
"full wording" top left, to see the draft. 

 

https://statutoryinstruments.parliament.uk/instrument/Iej3CpFt/

 

Best Regards, 

-Lauren


LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any
documents, files, or previous e-mail messages attached to it, (collectively,
"E-mail Transmission") may be subject to one or more of the following based
on the associated sensitivity level: E-mail Transmission (i) contains
confidential information, (ii) is prohibited from distribution outside of
Lam, and/or (iii) is intended solely for and restricted to the specified
recipient(s). If you are not the intended recipient, or a person responsible
for delivering it to the intended recipient, you are hereby notified that
any disclosure, copying, distribution or use of any of the information
contained in or attached to this message is STRICTLY PROHIBITED. If you have
received this transmission in error, please immediately notify the sender
and destroy the original transmission and its attachments without reading
them or saving them to disk. Thank you.

 

Confidential - Limited Access and Use

-


This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
mailto:emc-p...@ieee.org> >

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe) <http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Mike Cantwell mailto:mcantw...@ieee.org> > 

For policy questions, send mail to:
Jim Bacher mailto:j.bac...@ieee.org> >
David Heald mailto:dhe...@gmail.com> > 

  _  

To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC
<https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1> =1 


-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

Re: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

[John E Allen]

FYI, the latest CMS Law-Now report on progress of the legislation  

https://www.cms-lawnow.com/ealerts/2022/11/the-uk-government-will-review-the
-broadcast-rules-on-listed-sporting-events?cc_lang=en

 

John E Allen

W. London, UK

 

From: Lauren Crane <1afd08519f18-dmarc-requ...@listserv.ieee.org> 
Sent: 16 November 2022 15:41
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment
providing UKCA label deadline extension.

 

Hello All, 

 

In case you are interested in seeing it is more concretely true, here is a
link to the secondary legislation laid before parliament that is a proposal
to modify many (most/all) of the UKCA SI's with the extended date. Click on
"full wording" top left, to see the draft. 

 

https://statutoryinstruments.parliament.uk/instrument/Iej3CpFt/

 

Best Regards, 

-Lauren


LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any
documents, files, or previous e-mail messages attached to it, (collectively,
"E-mail Transmission") may be subject to one or more of the following based
on the associated sensitivity level: E-mail Transmission (i) contains
confidential information, (ii) is prohibited from distribution outside of
Lam, and/or (iii) is intended solely for and restricted to the specified
recipient(s). If you are not the intended recipient, or a person responsible
for delivering it to the intended recipient, you are hereby notified that
any disclosure, copying, distribution or use of any of the information
contained in or attached to this message is STRICTLY PROHIBITED. If you have
received this transmission in error, please immediately notify the sender
and destroy the original transmission and its attachments without reading
them or saving them to disk. Thank you.

 

Confidential - Limited Access and Use

-


This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
mailto:emc-p...@ieee.org> >

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe) <http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Mike Cantwell mailto:mcantw...@ieee.org> > 

For policy questions, send mail to:
Jim Bacher mailto:j.bac...@ieee.org> >
David Heald mailto:dhe...@gmail.com> > 

  _  

To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC
<https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1> =1 


-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

Re: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

[Scott Xe]

Lauren, tks for sharing!

Cheers,

Scott

On Wed, 16 Nov 2022 at 23:41, Lauren Crane <
1afd08519f18-dmarc-requ...@listserv.ieee.org> wrote:

> Hello All,
>
>
>
> In case you are interested in seeing it is more concretely true, here is a
> link to the secondary legislation laid before parliament that is a proposal
> to modify many (most/all) of the UKCA SI’s with the extended date. Click on
> “full wording” top left, to see the draft.
>
>
>
> https://statutoryinstruments.parliament.uk/instrument/Iej3CpFt/
>
>
>
> Best Regards,
>
> -Lauren
>
> LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any
> documents, files, or previous e-mail messages attached to it,
> (collectively, "E-mail Transmission") may be subject to one or more of the
> following based on the associated sensitivity level: E-mail Transmission
> (i) contains confidential information, (ii) is prohibited from distribution
> outside of Lam, and/or (iii) is intended solely for and restricted to the
> specified recipient(s). If you are not the intended recipient, or a person
> responsible for delivering it to the intended recipient, you are hereby
> notified that any disclosure, copying, distribution or use of any of the
> information contained in or attached to this message is STRICTLY
> PROHIBITED. If you have received this transmission in error, please
> immediately notify the sender and destroy the original transmission and its
> attachments without reading them or saving them to disk. Thank you.
>
> Confidential – Limited Access and Use
> -
> 
>
> This message is from the IEEE Product Safety Engineering Society emc-pstc
> discussion list. To post a message to the list, send your e-mail to 
> emc-p...@ieee.org
>
> All emc-pstc postings are archived and searchable on the web at:
> http://www.ieee-pses.org/emc-pstc.html
>
> Website: http://www.ieee-pses.org/
> Instructions: http://www.ieee-pses.org/list.html (including how to
> unsubscribe) 
> List rules: http://www.ieee-pses.org/listrules.html
>
> For help, send mail to the list administrators:
> Mike Cantwell mcantw...@ieee.org
>
> For policy questions, send mail to:
> Jim Bacher j.bac...@ieee.org
> David Heald dhe...@gmail.com
> --
>
> To unsubscribe from the EMC-PSTC list, click the following link:
> https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1
>

-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

[PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

[Lauren Crane]

Hello All,

In case you are interested in seeing it is more concretely true, here is a link 
to the secondary legislation laid before parliament that is a proposal to 
modify many (most/all) of the UKCA SI's with the extended date. Click on "full 
wording" top left, to see the draft.

https://statutoryinstruments.parliament.uk/instrument/Iej3CpFt/

Best Regards,
-Lauren

LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any 
documents, files, or previous e-mail messages attached to it, (collectively, 
"E-mail Transmission") may be subject to one or more of the following based on 
the associated sensitivity level: E-mail Transmission (i) contains confidential 
information, (ii) is prohibited from distribution outside of Lam, and/or (iii) 
is intended solely for and restricted to the specified recipient(s). If you are 
not the intended recipient, or a person responsible for delivering it to the 
intended recipient, you are hereby notified that any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
message is STRICTLY PROHIBITED. If you have received this transmission in 
error, please immediately notify the sender and destroy the original 
transmission and its attachments without reading them or saving them to disk. 
Thank you.


Confidential - Limited Access and Use

-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

Re: [PSES] SI amendment providing UKCA label deadline extension.

[Tom Smith]

The government has introduced the legislation to make it happen. The government 
has a majority in parliament therefore passage of the legislation  is as 
certain as anything can be in politics. As it is right now, CE marking (and 
alternatively UKCA marking) is recognized in the UK, so as long as the 
legislation passes prior to Dec 31st, it will simply be a continuation of the 
current status.

Regards,

Tom Smith, P.Eng

Principal Engineer
TJS Technical Services Inc.

Tel: +1 403-612-6664

Email:  <mailto:tsm...@tjstechnical.com> tsm...@tjstechnical.com
 <http://tjstechnical.com/> http://tjstechnical.com

Follow us on Twitter: TJS_Technical



From: Scott Xe 
Sent: November 14, 2022 10:44 PM
To: tsm...@tjstechnical.com
Cc: EMC-PSTC@listserv.ieee.org
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.



Thanks for clarification.  Do they take effect immediately?





On Tue, 15 Nov 2022 at 12:51, mailto:tsm...@tjstechnical.com> > wrote:

The June proposal had similarities, but the difference between now and June is 
that the June proposal was to allow UKCA markings alternatively on the 
accompanying documents whereas this proposal extends recognition of the CE 
marking.

Regards,

Tom Smith, P.Eng

Principal Engineer
TJS Technical Services Inc.

Tel: +1 403-612-6664

Email:  <mailto:tsm...@tjstechnical.com> tsm...@tjstechnical.com
 <http://tjstechnical.com/> http://tjstechnical.com

Follow us on Twitter: TJS_Technical



From: Scott Xe mailto:scott...@gmail.com> >
Sent: November 14, 2022 9:17 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.



Hi Charlie,



Yes, it is not a brand new extension as it was mentioned in June this year.  
Hope it amends the SI shortly.



Regards,



Scott





On Tue, 15 Nov 2022 at 01:44, Charlie Blackham mailto:char...@sulisconsultants.com> > wrote:

All



This relaxation has been trailed / announced, but it is not law until the 
Statutory Instrument has been published on https://www.legislation.gov.uk/ 
(it’s not there at time of typing)



Best regards

Charlie



Charlie Blackham

Sulis Consultants Ltd

Tel: +44 (0)7946 624317

Web: https://sulisconsultants.com/

Registered in England and Wales, number 05466247



From: Tom Smith mailto:tsm...@tjstechnical.com> >
Sent: 14 November 2022 17:37
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.



An announcement was made this morning extending allowance for using the CE 
marking for an additional 2 years until Dec 31, 2024.

https://www.gov.uk/government/news/businesses-to-be-given-uk-product-marking-flexibility

Regards,

Tom Smith, P.Eng

Principal Engineer
TJS Technical Services Inc.

Tel: +1 403-612-6664

Email:  <mailto:tsm...@tjstechnical.com> tsm...@tjstechnical.com
 <http://tjstechnical.com/> http://tjstechnical.com

Follow us on Twitter: TJS_Technical



From: Scott Xe mailto:scott...@gmail.com> >
Sent: November 14, 2022 9:30 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.



Dear Scott & Lauren,



Today, I received the following info to supplement the above development.



"Some news from the Department for Business, Energy and Industrial Strategy 
(BEIS):-



HMG intends to introduce legislation to continue recognition of the CE marking 
and reversed epsilon marking until 31 December 2024 for most goods being placed 
on the market or put into service in Great Britain as part of new ministers’ 
commitment to reduce burdens for industry.



This package of measures is intended to provide businesses with more 
flexibility and reduce burdens for businesses. We will use our regulatory 
autonomy to help businesses navigate the current global economic and supply 
chain challenges whilst prioritising growth.

 In parallel, we will also consider how we could reduce costs and burdens 
associated with the UK regulatory framework in the longer-term, including 
opportunities under the Product Safety Review.



We also intend to introduce legislation to give effect to the measures 
previously announced in June 2022 with amended timescales, in line with the 
extension.  These measures intend to:



• Reduce labelling costs by continuing to allow businesses to affix 
the UKCA marking, and to include importer information for products from EEA 
countries (and in some cases, Switzerland) on an accompanying document or a 
label until 31 December 2027.



• Reduce re-testing costs for UKCA certification by allowing 
conformity assessment activities for CE marking undertaken by 31 December 2024 
to be used by manufacturers as the basis for UKCA marking, until the expiry of 
the certificate or until 31 December 

Re: [PSES] SI amendment providing UKCA label deadline extension.

[Scott Xe]

Thanks for clarification.  Do they take effect immediately?


On Tue, 15 Nov 2022 at 12:51,  wrote:

> The June proposal had similarities, but the difference between now and
> June is that the June proposal was to allow UKCA markings alternatively on
> the accompanying documents whereas this proposal extends recognition of the
> CE marking.
>
> Regards,
>
> *Tom Smith, P.Eng *
>
>
> *Principal EngineerTJS Technical Services Inc.*
>
> Tel: +1 403-612-6664
>
> Email: tsm...@tjstechnical.com
> http://tjstechnical.com
>
> Follow us on Twitter: TJS_Technical
>
>
>
> *From:* Scott Xe 
> *Sent:* November 14, 2022 9:17 PM
> *To:* EMC-PSTC@LISTSERV.IEEE.ORG
> *Subject:* Re: [PSES] SI amendment providing UKCA label deadline
> extension.
>
>
>
> Hi Charlie,
>
>
>
> Yes, it is not a brand new extension as it was mentioned in June this
> year.  Hope it amends the SI shortly.
>
>
>
> Regards,
>
>
>
> Scott
>
>
>
>
>
> On Tue, 15 Nov 2022 at 01:44, Charlie Blackham <
> char...@sulisconsultants.com> wrote:
>
> All
>
>
>
> This relaxation has been trailed / announced, but it is not law until the
> Statutory Instrument has been published on https://www.legislation.gov.uk/
> (it’s not there at time of typing)
>
>
>
> Best regards
>
> Charlie
>
>
>
> *Charlie Blackham*
>
> *Sulis Consultants Ltd*
>
> *Tel: +44 (0)7946 624317*
>
> *Web: https://sulisconsultants.com/ <https://sulisconsultants.com/> *
>
> Registered in England and Wales, number 05466247
>
>
>
> *From:* Tom Smith 
> *Sent:* 14 November 2022 17:37
> *To:* EMC-PSTC@LISTSERV.IEEE.ORG
> *Subject:* Re: [PSES] SI amendment providing UKCA label deadline
> extension.
>
>
>
> An announcement was made this morning extending allowance for using the CE
> marking for an additional 2 years until Dec 31, 2024.
>
>
> https://www.gov.uk/government/news/businesses-to-be-given-uk-product-marking-flexibility
>
> Regards,
>
> *Tom Smith, P.Eng *
>
>
> *Principal EngineerTJS Technical Services Inc.*
>
> Tel: +1 403-612-6664
>
> Email: tsm...@tjstechnical.com
> http://tjstechnical.com
>
> Follow us on Twitter: TJS_Technical
>
>
>
> *From:* Scott Xe 
> *Sent:* November 14, 2022 9:30 AM
> *To:* EMC-PSTC@LISTSERV.IEEE.ORG
> *Subject:* Re: [PSES] SI amendment providing UKCA label deadline
> extension.
>
>
>
> Dear Scott & Lauren,
>
>
>
> Today, I received the following info to supplement the above development.
>
>
>
> *"Some news from the Department for Business, Energy and Industrial
> Strategy (BEIS):-*
>
>
>
> *HMG intends to introduce legislation to continue recognition of the CE
> marking and reversed epsilon marking until 31 December 2024 for most goods
> being placed on the market or put into service in Great Britain as part of
> new ministers’ commitment to reduce burdens for industry.*
>
>
>
> *This package of measures is intended to provide businesses with more
> flexibility and reduce burdens for businesses. We will use our regulatory
> autonomy to help businesses navigate the current global economic and supply
> chain challenges whilst prioritising growth.   *
>
> * In parallel, we will also consider how we could reduce costs and burdens
> associated with the UK regulatory framework in the longer-term, including
> opportunities under the Product Safety Review. *
>
>
>
> *We also intend to introduce legislation to give effect to the measures
> previously announced in June 2022 with amended timescales, in line with the
> extension.  These measures intend to: *
>
>
>
> *• Reduce labelling costs by continuing to allow businesses to
> affix the UKCA marking, and to include importer information for products
> from EEA countries (and in some cases, Switzerland) on an accompanying
> document or a label until 31 December 2027. *
>
>
>
> *• Reduce re-testing costs for UKCA certification by allowing
> conformity assessment activities for CE marking undertaken by 31 December
> 2024 to be used by manufacturers as the basis for UKCA marking, until the
> expiry of the certificate or until 31 December 2027, whichever is sooner."*
>
>
>
> Cheers,
>
>
>
> Scott
>
>
>
> On Sat, 12 Nov 2022 at 05:55, Scott Aldous <
> 0220f70c299a-dmarc-requ...@listserv.ieee.org> wrote:
>
> Hi Lauren,
>
>
>
> It's a good question. A draft amendment was published on 6 September to
> effect the extension, but the draft was withdrawn on 10 October, stating
> that "a new version will be publis

Re: [PSES] SI amendment providing UKCA label deadline extension.

[Tom Smith]

The June proposal had similarities, but the difference between now and June is 
that the June proposal was to allow UKCA markings alternatively on the 
accompanying documents whereas this proposal extends recognition of the CE 
marking.

Regards,

Tom Smith, P.Eng

Principal Engineer
TJS Technical Services Inc.

Tel: +1 403-612-6664

Email:  <mailto:tsm...@tjstechnical.com> tsm...@tjstechnical.com
 <http://tjstechnical.com/> http://tjstechnical.com

Follow us on Twitter: TJS_Technical



From: Scott Xe 
Sent: November 14, 2022 9:17 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.



Hi Charlie,



Yes, it is not a brand new extension as it was mentioned in June this year.  
Hope it amends the SI shortly.



Regards,



Scott





On Tue, 15 Nov 2022 at 01:44, Charlie Blackham mailto:char...@sulisconsultants.com> > wrote:

All



This relaxation has been trailed / announced, but it is not law until the 
Statutory Instrument has been published on https://www.legislation.gov.uk/ 
(it’s not there at time of typing)



Best regards

Charlie



Charlie Blackham

Sulis Consultants Ltd

Tel: +44 (0)7946 624317

Web: https://sulisconsultants.com/

Registered in England and Wales, number 05466247



From: Tom Smith mailto:tsm...@tjstechnical.com> >
Sent: 14 November 2022 17:37
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.



An announcement was made this morning extending allowance for using the CE 
marking for an additional 2 years until Dec 31, 2024.

https://www.gov.uk/government/news/businesses-to-be-given-uk-product-marking-flexibility

Regards,

Tom Smith, P.Eng

Principal Engineer
TJS Technical Services Inc.

Tel: +1 403-612-6664

Email:  <mailto:tsm...@tjstechnical.com> tsm...@tjstechnical.com
 <http://tjstechnical.com/> http://tjstechnical.com

Follow us on Twitter: TJS_Technical



From: Scott Xe mailto:scott...@gmail.com> >
Sent: November 14, 2022 9:30 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.



Dear Scott & Lauren,



Today, I received the following info to supplement the above development.



"Some news from the Department for Business, Energy and Industrial Strategy 
(BEIS):-



HMG intends to introduce legislation to continue recognition of the CE marking 
and reversed epsilon marking until 31 December 2024 for most goods being placed 
on the market or put into service in Great Britain as part of new ministers’ 
commitment to reduce burdens for industry.



This package of measures is intended to provide businesses with more 
flexibility and reduce burdens for businesses. We will use our regulatory 
autonomy to help businesses navigate the current global economic and supply 
chain challenges whilst prioritising growth.

 In parallel, we will also consider how we could reduce costs and burdens 
associated with the UK regulatory framework in the longer-term, including 
opportunities under the Product Safety Review.



We also intend to introduce legislation to give effect to the measures 
previously announced in June 2022 with amended timescales, in line with the 
extension.  These measures intend to:



• Reduce labelling costs by continuing to allow businesses to affix 
the UKCA marking, and to include importer information for products from EEA 
countries (and in some cases, Switzerland) on an accompanying document or a 
label until 31 December 2027.



• Reduce re-testing costs for UKCA certification by allowing 
conformity assessment activities for CE marking undertaken by 31 December 2024 
to be used by manufacturers as the basis for UKCA marking, until the expiry of 
the certificate or until 31 December 2027, whichever is sooner."



Cheers,



Scott



On Sat, 12 Nov 2022 at 05:55, Scott Aldous 
<0220f70c299a-dmarc-requ...@listserv.ieee.org 
<mailto:0220f70c299a-dmarc-requ...@listserv.ieee.org> > wrote:

Hi Lauren,



It's a good question. A draft amendment was published on 6 September to effect 
the extension, but the draft was withdrawn on 10 October, stating that "a new 
version will be published in due course". More information here 
<https://www.gov.uk/eu-withdrawal-act-2018-statutory-instruments/the-product-safety-and-metrology-amendment-regulations-2022>
 .



ExVeritas published an article on this on 3 November (in the context of ATEX 
Directive but generally applicable). You can find that article here 
<https://www.exveritas.com/2022/11/03/proposed-ukca-ex-atex-legislation-changes-withdrawn/>
 . Unfortunately the article doesn't give much more information.



On Wed, Nov 9, 2022 at 11:14 AM Lauren Crane 
<1afd08519f18-dmarc-requ...@listserv.ieee.org 
<mailto:1afd08519f18-dmarc-re

Re: [PSES] SI amendment providing UKCA label deadline extension.

[Scott Xe]

Hi Charlie,

Yes, it is not a brand new extension as it was mentioned in June this
year.  Hope it amends the SI shortly.

Regards,

Scott


On Tue, 15 Nov 2022 at 01:44, Charlie Blackham 
wrote:

> All
>
>
>
> This relaxation has been trailed / announced, but it is not law until the
> Statutory Instrument has been published on https://www.legislation.gov.uk/
> (it’s not there at time of typing)
>
>
>
> Best regards
>
> Charlie
>
>
>
> *Charlie Blackham*
>
> *Sulis Consultants Ltd*
>
> *Tel: +44 (0)7946 624317*
>
> *Web: https://sulisconsultants.com/ <https://sulisconsultants.com/> *
>
> Registered in England and Wales, number 05466247
>
>
>
> *From:* Tom Smith 
> *Sent:* 14 November 2022 17:37
> *To:* EMC-PSTC@LISTSERV.IEEE.ORG
> *Subject:* Re: [PSES] SI amendment providing UKCA label deadline
> extension.
>
>
>
> An announcement was made this morning extending allowance for using the CE
> marking for an additional 2 years until Dec 31, 2024.
>
>
> https://www.gov.uk/government/news/businesses-to-be-given-uk-product-marking-flexibility
>
> Regards,
>
> *Tom Smith, P.Eng *
>
>
> *Principal Engineer TJS Technical Services Inc.*
>
> Tel: +1 403-612-6664
>
> Email: tsm...@tjstechnical.com
> http://tjstechnical.com
>
> Follow us on Twitter: TJS_Technical
>
>
>
> *From:* Scott Xe 
> *Sent:* November 14, 2022 9:30 AM
> *To:* EMC-PSTC@LISTSERV.IEEE.ORG
> *Subject:* Re: [PSES] SI amendment providing UKCA label deadline
> extension.
>
>
>
> Dear Scott & Lauren,
>
>
>
> Today, I received the following info to supplement the above development.
>
>
>
> *"Some news from the Department for Business, Energy and Industrial
> Strategy (BEIS):-*
>
>
>
> *HMG intends to introduce legislation to continue recognition of the CE
> marking and reversed epsilon marking until 31 December 2024 for most goods
> being placed on the market or put into service in Great Britain as part of
> new ministers’ commitment to reduce burdens for industry.*
>
>
>
> *This package of measures is intended to provide businesses with more
> flexibility and reduce burdens for businesses. We will use our regulatory
> autonomy to help businesses navigate the current global economic and supply
> chain challenges whilst prioritising growth.   *
>
> * In parallel, we will also consider how we could reduce costs and burdens
> associated with the UK regulatory framework in the longer-term, including
> opportunities under the Product Safety Review. *
>
>
>
> *We also intend to introduce legislation to give effect to the measures
> previously announced in June 2022 with amended timescales, in line with the
> extension.  These measures intend to: *
>
>
>
> *• Reduce labelling costs by continuing to allow businesses to
> affix the UKCA marking, and to include importer information for products
> from EEA countries (and in some cases, Switzerland) on an accompanying
> document or a label until 31 December 2027. *
>
>
>
> *• Reduce re-testing costs for UKCA certification by allowing
> conformity assessment activities for CE marking undertaken by 31 December
> 2024 to be used by manufacturers as the basis for UKCA marking, until the
> expiry of the certificate or until 31 December 2027, whichever is sooner."*
>
>
>
> Cheers,
>
>
>
> Scott
>
>
>
> On Sat, 12 Nov 2022 at 05:55, Scott Aldous <
> 0220f70c299a-dmarc-requ...@listserv.ieee.org> wrote:
>
> Hi Lauren,
>
>
>
> It's a good question. A draft amendment was published on 6 September to
> effect the extension, but the draft was withdrawn on 10 October, stating
> that "a new version will be published in due course". More information
> here
> <https://www.gov.uk/eu-withdrawal-act-2018-statutory-instruments/the-product-safety-and-metrology-amendment-regulations-2022>
> .
>
>
>
> ExVeritas published an article on this on 3 November (in the context of
> ATEX Directive but generally applicable). You can find that article here
> <https://www.exveritas.com/2022/11/03/proposed-ukca-ex-atex-legislation-changes-withdrawn/>.
> Unfortunately the article doesn't give much more information.
>
>
>
> On Wed, Nov 9, 2022 at 11:14 AM Lauren Crane <
> 1afd08519f18-dmarc-requ...@listserv.ieee.org> wrote:
>
> Hello All,
>
>
>
> Among all the UKCA discussion I have not noticed information on whether
> the promised no-label extension to 2026, though promised on government
> websites, is actually in the works with hope of becoming law before Jan 1,
> 2023.
>
>
>
> Does anyo

Re: [PSES] Time zone? RE: [PSES] SI amendment providing UKCA label deadline extension.

[Scott Aldous]

I don't know, but would assume time zone local to BEIS.

With regard to the legislation title, I don't know that either. I was
planning on just checking the new legislation link.

On Mon, Nov 14, 2022 at 1:52 PM  wrote:

> Scott,
>
>
>
> One more question…. 3pm in what time zone?
>
>
>
> Best Regards,
>
> -Lauren
>
>
>
> *From:* Scott Aldous <0220f70c299a-dmarc-requ...@listserv.ieee.org>
> *Sent:* Monday, November 14, 2022 10:52 AM
> *To:* EMC-PSTC@LISTSERV.IEEE.ORG
> *Subject:* Re: [PSES] SI amendment providing UKCA label deadline
> extension.
>
>
>
> You don't often get email from
> 0220f70c299a-dmarc-requ...@listserv.ieee.org. Learn why this is
> important <https://aka.ms/LearnAboutSenderIdentification>
>
>
>
>
>
> *External Email:* Do NOT reply, click on links, or open attachments
> *unless* you recognize the sender and know the content is safe. If you
> believe this email may be unsafe, please click on the “Report Phishing”
> button on the top right of Outlook.
>
>
>
> Thanks, Scott, for sharing. Some additional information from the same BEIS
> announcement I received through ITI
> <https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415495784422%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=6ao18QupeXdRfSf%2BQOyTh8qjbr%2By1u01CkP3QCUxOsM%3D=0>:
>
>
>
>
> We expect the legislation to be laid later today. You will be able to find
> it on legislation.gov.uk
> <https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flegislation.gov.uk%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415495784422%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=YcpZNl3FJ%2F8CtGhcY4Cvw32pOneGv5GD8Es113E%2F4nI%3D=0>
> .
>
>
>
> We are also hosting a webinar specifically for businesses and
> intermediaries regarding these measures on *November 16 at 3pm* (you can
> access it using this link
> <https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2Fservlets%2FemailLink%3Fuuid%3Df8465fa6-332a-4150-b1d7-391715b4854a=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415495784422%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=GBp7gHra9fvwzmUY3baFyNnpfW6AqVJb8%2FUMjfVQXf4%3D=0>
> ). This is intended to help stakeholders understand the changes. Please
> feel free to share this link with your networks.
>
>
>
> We have also published a news story
> <https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2Fservlets%2FemailLink%3Fuuid%3Da8516fb7-a5f5-4da8-8122-515862f57d42=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415495784422%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=dRADf0gKkZuZhTl%2FAaZnyQeNFxDV0CTssu28740yeBk%3D=0>
> on GOV.UK
> <https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fgov.uk%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415496096874%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=dlO%2Bf2afx3z7xKRfDaFlgZOQsUIvNHYdw%2BSH9eqSw6k%3D=0>
> and updated our guidance on GOV.UK
> <https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fgov.uk%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415496096874%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=dlO%2Bf2afx3z7xKRfDaFlgZOQsUIvNHYdw%2BSH9eqSw6k%3D=0>
> :
>
> ·Using the UKCA marking
> <https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2Fservlets%2FemailLink%3Fuuid%3D3728c05f-db3d-48d5-8a08-47899a73e09e=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415496096874%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=yA43V2linaFyNd8eFFQlB%2F4ycDPBh2ZZBC2OOQMHZYc%3D=0>
>
>
> ·Placing manufactured goods on the market in GB
> <https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2Fservlets%2FemailLink%3Fuuid%

[PSES] Time zone? RE: [PSES] SI amendment providing UKCA label deadline extension.

[Lauren Crane]

Scott,

One more question 3pm in what time zone?

Best Regards,
-Lauren

From: Scott Aldous <0220f70c299a-dmarc-requ...@listserv.ieee.org>
Sent: Monday, November 14, 2022 10:52 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.

You don't often get email from 
0220f70c299a-dmarc-requ...@listserv.ieee.org<mailto:0220f70c299a-dmarc-requ...@listserv.ieee.org>.
 Learn why this is important<https://aka.ms/LearnAboutSenderIdentification>



External Email: Do NOT reply, click on links, or open attachments unless you 
recognize the sender and know the content is safe. If you believe this email 
may be unsafe, please click on the "Report Phishing" button on the top right of 
Outlook.


Thanks, Scott, for sharing. Some additional information from the same BEIS 
announcement I received through 
ITI<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415495784422%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=6ao18QupeXdRfSf%2BQOyTh8qjbr%2By1u01CkP3QCUxOsM%3D=0>:


We expect the legislation to be laid later today. You will be able to find it 
on 
legislation.gov.uk<https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flegislation.gov.uk%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415495784422%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=YcpZNl3FJ%2F8CtGhcY4Cvw32pOneGv5GD8Es113E%2F4nI%3D=0>.



We are also hosting a webinar specifically for businesses and intermediaries 
regarding these measures on November 16 at 3pm (you can access it using this 
link<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2Fservlets%2FemailLink%3Fuuid%3Df8465fa6-332a-4150-b1d7-391715b4854a=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415495784422%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=GBp7gHra9fvwzmUY3baFyNnpfW6AqVJb8%2FUMjfVQXf4%3D=0>).
 This is intended to help stakeholders understand the changes. Please feel free 
to share this link with your networks.



We have also published a news 
story<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2Fservlets%2FemailLink%3Fuuid%3Da8516fb7-a5f5-4da8-8122-515862f57d42=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415495784422%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=dRADf0gKkZuZhTl%2FAaZnyQeNFxDV0CTssu28740yeBk%3D=0>
 on 
GOV.UK<https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fgov.uk%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415496096874%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=dlO%2Bf2afx3z7xKRfDaFlgZOQsUIvNHYdw%2BSH9eqSw6k%3D=0>
 and updated our guidance on 
GOV.UK<https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fgov.uk%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415496096874%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=dlO%2Bf2afx3z7xKRfDaFlgZOQsUIvNHYdw%2BSH9eqSw6k%3D=0>:

*Using the UKCA 
marking<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2Fservlets%2FemailLink%3Fuuid%3D3728c05f-db3d-48d5-8a08-47899a73e09e=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415496096874%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=yA43V2linaFyNd8eFFQlB%2F4ycDPBh2ZZBC2OOQMHZYc%3D=0>

*Placing manufactured goods on the market in 
GB<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2Fservlets%2FemailLink%3Fuuid%3D14162e61-121b-4014-8d4b-c59ec4645b5c=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415496096874%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=lxsuin8eXWm3PshiUAuQ7q%2BXrvYwy9MGmD1k%2BwmDlo4%3D=0>

*UK conformity assessment and 
documentation<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2Fservlets%2

Re: [PSES] SI amendment providing UKCA label deadline extension.

[Lauren Crane]

Scott,

Thanks for the further information. I've had quite a bit of fun boot-strapping 
on how to search for "documents laid", etc... Can you say what the title of the 
secondary legislation will be like when it is laid?

Best Regards,
-Lauren

From: Scott Aldous <0220f70c299a-dmarc-requ...@listserv.ieee.org>
Sent: Monday, November 14, 2022 10:52 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.

You don't often get email from 
0220f70c299a-dmarc-requ...@listserv.ieee.org<mailto:0220f70c299a-dmarc-requ...@listserv.ieee.org>.
 Learn why this is important<https://aka.ms/LearnAboutSenderIdentification>



External Email: Do NOT reply, click on links, or open attachments unless you 
recognize the sender and know the content is safe. If you believe this email 
may be unsafe, please click on the "Report Phishing" button on the top right of 
Outlook.


Thanks, Scott, for sharing. Some additional information from the same BEIS 
announcement I received through 
ITI<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415495784422%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=6ao18QupeXdRfSf%2BQOyTh8qjbr%2By1u01CkP3QCUxOsM%3D=0>:


We expect the legislation to be laid later today. You will be able to find it 
on 
legislation.gov.uk<https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flegislation.gov.uk%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415495784422%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=YcpZNl3FJ%2F8CtGhcY4Cvw32pOneGv5GD8Es113E%2F4nI%3D=0>.



We are also hosting a webinar specifically for businesses and intermediaries 
regarding these measures on November 16 at 3pm (you can access it using this 
link<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2Fservlets%2FemailLink%3Fuuid%3Df8465fa6-332a-4150-b1d7-391715b4854a=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415495784422%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=GBp7gHra9fvwzmUY3baFyNnpfW6AqVJb8%2FUMjfVQXf4%3D=0>).
 This is intended to help stakeholders understand the changes. Please feel free 
to share this link with your networks.



We have also published a news 
story<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2Fservlets%2FemailLink%3Fuuid%3Da8516fb7-a5f5-4da8-8122-515862f57d42=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415495784422%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=dRADf0gKkZuZhTl%2FAaZnyQeNFxDV0CTssu28740yeBk%3D=0>
 on 
GOV.UK<https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fgov.uk%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415496096874%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=dlO%2Bf2afx3z7xKRfDaFlgZOQsUIvNHYdw%2BSH9eqSw6k%3D=0>
 and updated our guidance on 
GOV.UK<https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fgov.uk%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415496096874%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=dlO%2Bf2afx3z7xKRfDaFlgZOQsUIvNHYdw%2BSH9eqSw6k%3D=0>:

*Using the UKCA 
marking<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2Fservlets%2FemailLink%3Fuuid%3D3728c05f-db3d-48d5-8a08-47899a73e09e=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415496096874%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=yA43V2linaFyNd8eFFQlB%2F4ycDPBh2ZZBC2OOQMHZYc%3D=0>

*Placing manufactured goods on the market in 
GB<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.itic.org%2Fservlets%2FemailLink%3Fuuid%3D14162e61-121b-4014-8d4b-c59ec4645b5c=05%7C01%7CLauren.Crane%40lamresearch.com%7C6a523e3589c64411aa0c08dac6609bc3%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638040415496096874%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=lxsuin8eXWm3PshiUAuQ7q%2BXrvYwy9MGmD1k

Re: [PSES] SI amendment providing UKCA label deadline extension.

[John E Allen]

So, half-way between the current date and the 2026 one that was “vaguely 
postulated” in that CMS Cameron-Mckenna blog! 

 

Probably “about right” to move it out, but not too far as to allow people to 
forget that all that legislation must be reviewed/amended and dealt with in 
relatively short order.

 

John E Allen

W. London, UK

 

From: Tom Smith  
Sent: 14 November 2022 17:37
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.

 

An announcement was made this morning extending allowance for using the CE 
marking for an additional 2 years until Dec 31, 2024.

https://www.gov.uk/government/news/businesses-to-be-given-uk-product-marking-flexibility

Regards,

Tom Smith, P.Eng 

Principal Engineer
TJS Technical Services Inc.

Tel: +1 403-612-6664 

Email:  <mailto:tsm...@tjstechnical.com> tsm...@tjstechnical.com 
 <http://tjstechnical.com/> http://tjstechnical.com 

Follow us on Twitter: TJS_Technical

 

From: Scott Xe mailto:scott...@gmail.com> > 
Sent: November 14, 2022 9:30 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> 
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.

 

Dear Scott & Lauren,

 

Today, I received the following info to supplement the above development.

 

"Some news from the Department for Business, Energy and Industrial Strategy 
(BEIS):-

 

HMG intends to introduce legislation to continue recognition of the CE marking 
and reversed epsilon marking until 31 December 2024 for most goods being placed 
on the market or put into service in Great Britain as part of new ministers’ 
commitment to reduce burdens for industry.

 

This package of measures is intended to provide businesses with more 
flexibility and reduce burdens for businesses. We will use our regulatory 
autonomy to help businesses navigate the current global economic and supply 
chain challenges whilst prioritising growth.   

 In parallel, we will also consider how we could reduce costs and burdens 
associated with the UK regulatory framework in the longer-term, including 
opportunities under the Product Safety Review. 

 

We also intend to introduce legislation to give effect to the measures 
previously announced in June 2022 with amended timescales, in line with the 
extension.  These measures intend to: 

 

• Reduce labelling costs by continuing to allow businesses to affix 
the UKCA marking, and to include importer information for products from EEA 
countries (and in some cases, Switzerland) on an accompanying document or a 
label until 31 December 2027. 

 

• Reduce re-testing costs for UKCA certification by allowing 
conformity assessment activities for CE marking undertaken by 31 December 2024 
to be used by manufacturers as the basis for UKCA marking, until the expiry of 
the certificate or until 31 December 2027, whichever is sooner."

 

Cheers,

 

Scott

 

On Sat, 12 Nov 2022 at 05:55, Scott Aldous 
<0220f70c299a-dmarc-requ...@listserv.ieee.org 
<mailto:0220f70c299a-dmarc-requ...@listserv.ieee.org> > wrote:

Hi Lauren,

 

It's a good question. A draft amendment was published on 6 September to effect 
the extension, but the draft was withdrawn on 10 October, stating that "a new 
version will be published in due course". More information here 
<https://www.gov.uk/eu-withdrawal-act-2018-statutory-instruments/the-product-safety-and-metrology-amendment-regulations-2022>
 .

 

ExVeritas published an article on this on 3 November (in the context of ATEX 
Directive but generally applicable). You can find that article here 
<https://www.exveritas.com/2022/11/03/proposed-ukca-ex-atex-legislation-changes-withdrawn/>
 . Unfortunately the article doesn't give much more information.

 

On Wed, Nov 9, 2022 at 11:14 AM Lauren Crane 
<1afd08519f18-dmarc-requ...@listserv.ieee.org 
<mailto:1afd08519f18-dmarc-requ...@listserv.ieee.org> > wrote:

Hello All, 

 

Among all the UKCA discussion I have not noticed information on whether the 
promised no-label extension to 2026, though promised on government websites, is 
actually in the works with hope of becoming law before Jan 1, 2023.

 

Does anyone have information on this point? 

 

Best Regards, 

-Lauren

 


LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any 
documents, files, or previous e-mail messages attached to it, (collectively, 
"E-mail Transmission") may be subject to one or more of the following based on 
the associated sensitivity level: E-mail Transmission (i) contains confidential 
information, (ii) is prohibited from distribution outside of Lam, and/or (iii) 
is intended solely for and restricted to the specified recipient(s). If you are 
not the intended recipient, or a person responsible for delivering it to the 
intended recipient, you are hereby notified that any disclosure, copying, 
distr

Re: [PSES] SI amendment providing UKCA label deadline extension.

[Charlie Blackham]

All

This relaxation has been trailed / announced, but it is not law until the 
Statutory Instrument has been published on https://www.legislation.gov.uk/ 
(it’s not there at time of typing)

Best regards
Charlie

Charlie Blackham
Sulis Consultants Ltd
Tel: +44 (0)7946 624317
Web: https://sulisconsultants.com/
Registered in England and Wales, number 05466247

From: Tom Smith 
Sent: 14 November 2022 17:37
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.

An announcement was made this morning extending allowance for using the CE 
marking for an additional 2 years until Dec 31, 2024.
https://www.gov.uk/government/news/businesses-to-be-given-uk-product-marking-flexibility
Regards,
Tom Smith, P.Eng
Principal Engineer
TJS Technical Services Inc.
Tel: +1 403-612-6664
Email: tsm...@tjstechnical.com<mailto:tsm...@tjstechnical.com>
http://tjstechnical.com<http://tjstechnical.com/>
Follow us on Twitter: TJS_Technical

From: Scott Xe mailto:scott...@gmail.com>>
Sent: November 14, 2022 9:30 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.

Dear Scott & Lauren,

Today, I received the following info to supplement the above development.

"Some news from the Department for Business, Energy and Industrial Strategy 
(BEIS):-

HMG intends to introduce legislation to continue recognition of the CE marking 
and reversed epsilon marking until 31 December 2024 for most goods being placed 
on the market or put into service in Great Britain as part of new ministers’ 
commitment to reduce burdens for industry.

This package of measures is intended to provide businesses with more 
flexibility and reduce burdens for businesses. We will use our regulatory 
autonomy to help businesses navigate the current global economic and supply 
chain challenges whilst prioritising growth.
 In parallel, we will also consider how we could reduce costs and burdens 
associated with the UK regulatory framework in the longer-term, including 
opportunities under the Product Safety Review.

We also intend to introduce legislation to give effect to the measures 
previously announced in June 2022 with amended timescales, in line with the 
extension.  These measures intend to:

• Reduce labelling costs by continuing to allow businesses to affix 
the UKCA marking, and to include importer information for products from EEA 
countries (and in some cases, Switzerland) on an accompanying document or a 
label until 31 December 2027.

• Reduce re-testing costs for UKCA certification by allowing 
conformity assessment activities for CE marking undertaken by 31 December 2024 
to be used by manufacturers as the basis for UKCA marking, until the expiry of 
the certificate or until 31 December 2027, whichever is sooner."

Cheers,

Scott

On Sat, 12 Nov 2022 at 05:55, Scott Aldous 
<0220f70c299a-dmarc-requ...@listserv.ieee.org<mailto:0220f70c299a-dmarc-requ...@listserv.ieee.org>>
 wrote:
Hi Lauren,

It's a good question. A draft amendment was published on 6 September to effect 
the extension, but the draft was withdrawn on 10 October, stating that "a new 
version will be published in due course". More information 
here<https://www.gov.uk/eu-withdrawal-act-2018-statutory-instruments/the-product-safety-and-metrology-amendment-regulations-2022>.

ExVeritas published an article on this on 3 November (in the context of ATEX 
Directive but generally applicable). You can find that article 
here<https://www.exveritas.com/2022/11/03/proposed-ukca-ex-atex-legislation-changes-withdrawn/>.
 Unfortunately the article doesn't give much more information.

On Wed, Nov 9, 2022 at 11:14 AM Lauren Crane 
<1afd08519f18-dmarc-requ...@listserv.ieee.org<mailto:1afd08519f18-dmarc-requ...@listserv.ieee.org>>
 wrote:
Hello All,

Among all the UKCA discussion I have not noticed information on whether the 
promised no-label extension to 2026, though promised on government websites, is 
actually in the works with hope of becoming law before Jan 1, 2023.

Does anyone have information on this point?

Best Regards,
-Lauren


LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any 
documents, files, or previous e-mail messages attached to it, (collectively, 
"E-mail Transmission") may be subject to one or more of the following based on 
the associated sensitivity level: E-mail Transmission (i) contains confidential 
information, (ii) is prohibited from distribution outside of Lam, and/or (iii) 
is intended solely for and restricted to the specified recipient(s). If you are 
not the intended recipient, or a person responsible for delivering it to the 
intended recipient, you are hereby notified that any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
messag

Re: [PSES] SI amendment providing UKCA label deadline extension.

[Tom Smith]

An announcement was made this morning extending allowance for using the CE 
marking for an additional 2 years until Dec 31, 2024.

https://www.gov.uk/government/news/businesses-to-be-given-uk-product-marking-flexibility

Regards,

Tom Smith, P.Eng

Principal Engineer
TJS Technical Services Inc.

Tel: +1 403-612-6664

Email:  <mailto:tsm...@tjstechnical.com> tsm...@tjstechnical.com
 <http://tjstechnical.com/> http://tjstechnical.com

Follow us on Twitter: TJS_Technical



From: Scott Xe 
Sent: November 14, 2022 9:30 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.



Dear Scott & Lauren,



Today, I received the following info to supplement the above development.



"Some news from the Department for Business, Energy and Industrial Strategy 
(BEIS):-



HMG intends to introduce legislation to continue recognition of the CE marking 
and reversed epsilon marking until 31 December 2024 for most goods being placed 
on the market or put into service in Great Britain as part of new ministers’ 
commitment to reduce burdens for industry.



This package of measures is intended to provide businesses with more 
flexibility and reduce burdens for businesses. We will use our regulatory 
autonomy to help businesses navigate the current global economic and supply 
chain challenges whilst prioritising growth.

 In parallel, we will also consider how we could reduce costs and burdens 
associated with the UK regulatory framework in the longer-term, including 
opportunities under the Product Safety Review.



We also intend to introduce legislation to give effect to the measures 
previously announced in June 2022 with amended timescales, in line with the 
extension.  These measures intend to:



• Reduce labelling costs by continuing to allow businesses to affix 
the UKCA marking, and to include importer information for products from EEA 
countries (and in some cases, Switzerland) on an accompanying document or a 
label until 31 December 2027.



• Reduce re-testing costs for UKCA certification by allowing 
conformity assessment activities for CE marking undertaken by 31 December 2024 
to be used by manufacturers as the basis for UKCA marking, until the expiry of 
the certificate or until 31 December 2027, whichever is sooner."



Cheers,



Scott



On Sat, 12 Nov 2022 at 05:55, Scott Aldous 
<0220f70c299a-dmarc-requ...@listserv.ieee.org 
<mailto:0220f70c299a-dmarc-requ...@listserv.ieee.org> > wrote:

Hi Lauren,



It's a good question. A draft amendment was published on 6 September to effect 
the extension, but the draft was withdrawn on 10 October, stating that "a new 
version will be published in due course". More information here 
<https://www.gov.uk/eu-withdrawal-act-2018-statutory-instruments/the-product-safety-and-metrology-amendment-regulations-2022>
 .



ExVeritas published an article on this on 3 November (in the context of ATEX 
Directive but generally applicable). You can find that article here 
<https://www.exveritas.com/2022/11/03/proposed-ukca-ex-atex-legislation-changes-withdrawn/>
 . Unfortunately the article doesn't give much more information.



On Wed, Nov 9, 2022 at 11:14 AM Lauren Crane 
<1afd08519f18-dmarc-requ...@listserv.ieee.org 
<mailto:1afd08519f18-dmarc-requ...@listserv.ieee.org> > wrote:

Hello All,



Among all the UKCA discussion I have not noticed information on whether the 
promised no-label extension to 2026, though promised on government websites, is 
actually in the works with hope of becoming law before Jan 1, 2023.



Does anyone have information on this point?



Best Regards,

-Lauren




LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any 
documents, files, or previous e-mail messages attached to it, (collectively, 
"E-mail Transmission") may be subject to one or more of the following based on 
the associated sensitivity level: E-mail Transmission (i) contains confidential 
information, (ii) is prohibited from distribution outside of Lam, and/or (iii) 
is intended solely for and restricted to the specified recipient(s). If you are 
not the intended recipient, or a person responsible for delivering it to the 
intended recipient, you are hereby notified that any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
message is STRICTLY PROHIBITED. If you have received this transmission in 
error, please immediately notify the sender and destroy the original 
transmission and its attachments without reading them or saving them to disk. 
Thank you



Confidential – Limited Access and Use

-


This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
emc-p...@ieee.org <mailto:emc-p...@ieee.org

Re: [PSES] SI amendment providing UKCA label deadline extension.

[Scott Aldous]

Thanks, Scott, for sharing. Some additional information from the same BEIS
announcement I received through ITI :

We expect the legislation to be laid later today. You will be able to find
it on legislation.gov.uk.



We are also hosting a webinar specifically for businesses and
intermediaries regarding these measures on *November 16 at 3pm* (you can
access it using this link

). This is intended to help stakeholders understand the changes. Please
feel free to share this link with your networks.



We have also published a news story

on GOV.UK  and updated our guidance on GOV.UK
:

·Using the UKCA marking



·Placing manufactured goods on the market in GB



·UK conformity assessment and documentation



·Roles and responsibilities



On Mon, Nov 14, 2022 at 8:30 AM Scott Xe  wrote:

> Dear Scott & Lauren,
>
> Today, I received the following info to supplement the above development.
>
> *"Some news from the Department for Business, Energy and Industrial
> Strategy (BEIS):-*
>
> *HMG intends to introduce legislation to continue recognition of the CE
> marking and reversed epsilon marking until 31 December 2024 for most goods
> being placed on the market or put into service in Great Britain as part of
> new ministers’ commitment to reduce burdens for industry.*
>
> *This package of measures is intended to provide businesses with more
> flexibility and reduce burdens for businesses. We will use our regulatory
> autonomy to help businesses navigate the current global economic and supply
> chain challenges whilst prioritising growth.   *
> * In parallel, we will also consider how we could reduce costs and burdens
> associated with the UK regulatory framework in the longer-term, including
> opportunities under the Product Safety Review. *
>
> *We also intend to introduce legislation to give effect to the measures
> previously announced in June 2022 with amended timescales, in line with the
> extension.  These measures intend to: *
>
> *• Reduce labelling costs by continuing to allow businesses to affix the
> UKCA marking, and to include importer information for products from EEA
> countries (and in some cases, Switzerland) on an accompanying document or a
> label until 31 December 2027. *
>
> *• Reduce re-testing costs for UKCA certification by allowing conformity
> assessment activities for CE marking undertaken by 31 December 2024 to be
> used by manufacturers as the basis for UKCA marking, until the expiry of
> the certificate or until 31 December 2027, whichever is sooner."*
>
> Cheers,
>
> Scott
>
> On Sat, 12 Nov 2022 at 05:55, Scott Aldous <
> 0220f70c299a-dmarc-requ...@listserv.ieee.org> wrote:
>
>> Hi Lauren,
>>
>> It's a good question. A draft amendment was published on 6 September to
>> effect the extension, but the draft was withdrawn on 10 October, stating
>> that "a new version will be published in due course". More information
>> here
>> 
>> .
>>
>> ExVeritas published an article on this on 3 November (in the context of
>> ATEX Directive but generally applicable). You can find that article here
>> .
>> Unfortunately the article doesn't give much more information.
>>
>> On Wed, Nov 9, 2022 at 11:14 AM Lauren Crane <
>> 1afd08519f18-dmarc-requ...@listserv.ieee.org> wrote:
>>
>>> Hello All,
>>>
>>>
>>>
>>> Among all the UKCA discussion I have not noticed information on whether
>>> the promised no-label extension to 2026, though promised on government
>>> websites, is actually in the works with hope of becoming law before Jan 1,
>>> 2023.
>>>
>>>
>>>
>>> Does anyone have information on this point?
>>>
>>>
>>>
>>> Best Regards,
>>>
>>> -Lauren
>>>
>>>
>>>
>>> LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any
>>> documents, files, or previous e-mail messages attached to it,
>>> (collectively, "E-mail Transmission") may be subject to one or more of the
>>> following based on the associated sensitivity level: E-mail Transmission
>>> (i) contains confidential information, (ii) is prohibited from distribution
>>> outside of Lam, and/or (iii) is intended solely for and restricted to the
>>> specified recipient(s). If you are not the intended recipient, or a person
>>> responsible for 

Re: [PSES] SI amendment providing UKCA label deadline extension.

[Scott Xe]

Dear Scott & Lauren,

Today, I received the following info to supplement the above development.

*"Some news from the Department for Business, Energy and Industrial
Strategy (BEIS):-*

*HMG intends to introduce legislation to continue recognition of the CE
marking and reversed epsilon marking until 31 December 2024 for most goods
being placed on the market or put into service in Great Britain as part of
new ministers’ commitment to reduce burdens for industry.*

*This package of measures is intended to provide businesses with more
flexibility and reduce burdens for businesses. We will use our regulatory
autonomy to help businesses navigate the current global economic and supply
chain challenges whilst prioritising growth.   *
* In parallel, we will also consider how we could reduce costs and burdens
associated with the UK regulatory framework in the longer-term, including
opportunities under the Product Safety Review. *

*We also intend to introduce legislation to give effect to the measures
previously announced in June 2022 with amended timescales, in line with the
extension.  These measures intend to: *

*• Reduce labelling costs by continuing to allow businesses to affix the
UKCA marking, and to include importer information for products from EEA
countries (and in some cases, Switzerland) on an accompanying document or a
label until 31 December 2027. *

*• Reduce re-testing costs for UKCA certification by allowing conformity
assessment activities for CE marking undertaken by 31 December 2024 to be
used by manufacturers as the basis for UKCA marking, until the expiry of
the certificate or until 31 December 2027, whichever is sooner."*

Cheers,

Scott

On Sat, 12 Nov 2022 at 05:55, Scott Aldous <
0220f70c299a-dmarc-requ...@listserv.ieee.org> wrote:

> Hi Lauren,
>
> It's a good question. A draft amendment was published on 6 September to
> effect the extension, but the draft was withdrawn on 10 October, stating
> that "a new version will be published in due course". More information
> here
> 
> .
>
> ExVeritas published an article on this on 3 November (in the context of
> ATEX Directive but generally applicable). You can find that article here
> .
> Unfortunately the article doesn't give much more information.
>
> On Wed, Nov 9, 2022 at 11:14 AM Lauren Crane <
> 1afd08519f18-dmarc-requ...@listserv.ieee.org> wrote:
>
>> Hello All,
>>
>>
>>
>> Among all the UKCA discussion I have not noticed information on whether
>> the promised no-label extension to 2026, though promised on government
>> websites, is actually in the works with hope of becoming law before Jan 1,
>> 2023.
>>
>>
>>
>> Does anyone have information on this point?
>>
>>
>>
>> Best Regards,
>>
>> -Lauren
>>
>>
>>
>> LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any
>> documents, files, or previous e-mail messages attached to it,
>> (collectively, "E-mail Transmission") may be subject to one or more of the
>> following based on the associated sensitivity level: E-mail Transmission
>> (i) contains confidential information, (ii) is prohibited from distribution
>> outside of Lam, and/or (iii) is intended solely for and restricted to the
>> specified recipient(s). If you are not the intended recipient, or a person
>> responsible for delivering it to the intended recipient, you are hereby
>> notified that any disclosure, copying, distribution or use of any of the
>> information contained in or attached to this message is STRICTLY
>> PROHIBITED. If you have received this transmission in error, please
>> immediately notify the sender and destroy the original transmission and its
>> attachments without reading them or saving them to disk. Thank you.
>>
>> Confidential – Limited Access and Use
>> -
>> 
>>
>> This message is from the IEEE Product Safety Engineering Society emc-pstc
>> discussion list. To post a message to the list, send your e-mail to 
>> emc-p...@ieee.org
>>
>> All emc-pstc postings are archived and searchable on the web at:
>> http://www.ieee-pses.org/emc-pstc.html
>>
>> Website: http://www.ieee-pses.org/
>> Instructions: http://www.ieee-pses.org/list.html (including how to
>> unsubscribe) 
>> List rules: http://www.ieee-pses.org/listrules.html
>>
>> For help, send mail to the list administrators:
>> Mike Cantwell mcantw...@ieee.org
>>
>> For policy questions, send mail to:
>> Jim Bacher j.bac...@ieee.org
>> David Heald dhe...@gmail.com
>> --
>>
>> To unsubscribe from the EMC-PSTC list, click the following link:
>> https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1
>>
>
>
> --
> Scott Aldous | Regulatory Compliance Manager | scottald...@google.com |
>  650-253-1994
>

Re: [PSES] SI amendment providing UKCA label deadline extension.

[Lauren Crane]

Thank you very much, Scott.

Best Regards,
-Lauren

From: Scott Aldous 
Sent: Friday, November 11, 2022 1:55 PM
To: Crane, Lauren 
Cc: EMC-PSTC@listserv.ieee.org
Subject: Re: [PSES] SI amendment providing UKCA label deadline extension.



External Email: Do NOT reply, click on links, or open attachments unless you 
recognize the sender and know the content is safe. If you believe this email 
may be unsafe, please click on the "Report Phishing" button on the top right of 
Outlook.


Hi Lauren,

It's a good question. A draft amendment was published on 6 September to effect 
the extension, but the draft was withdrawn on 10 October, stating that "a new 
version will be published in due course". More information 
here<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.gov.uk%2Feu-withdrawal-act-2018-statutory-instruments%2Fthe-product-safety-and-metrology-amendment-regulations-2022=05%7C01%7CLauren.Crane%40lamresearch.com%7C5317f52310f242f1c2e908dac42f7853%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638038005430531882%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=mBm7Ut7h4PZPi2FWJPTQKF0QvL8Zry9AOpzLPUAsCYQ%3D=0>.

ExVeritas published an article on this on 3 November (in the context of ATEX 
Directive but generally applicable). You can find that article 
here<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.exveritas.com%2F2022%2F11%2F03%2Fproposed-ukca-ex-atex-legislation-changes-withdrawn%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C5317f52310f242f1c2e908dac42f7853%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638038005430531882%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=tMmfJCHoSJ9m3wPnbFc2O31ulZO8xQQrCnrZ1HC8xW8%3D=0>.
 Unfortunately the article doesn't give much more information.

On Wed, Nov 9, 2022 at 11:14 AM Lauren Crane 
<1afd08519f18-dmarc-requ...@listserv.ieee.org<mailto:1afd08519f18-dmarc-requ...@listserv.ieee.org>>
 wrote:
Hello All,

Among all the UKCA discussion I have not noticed information on whether the 
promised no-label extension to 2026, though promised on government websites, is 
actually in the works with hope of becoming law before Jan 1, 2023.

Does anyone have information on this point?

Best Regards,
-Lauren


LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any 
documents, files, or previous e-mail messages attached to it, (collectively, 
"E-mail Transmission") may be subject to one or more of the following based on 
the associated sensitivity level: E-mail Transmission (i) contains confidential 
information, (ii) is prohibited from distribution outside of Lam, and/or (iii) 
is intended solely for and restricted to the specified recipient(s). If you are 
not the intended recipient, or a person responsible for delivering it to the 
intended recipient, you are hereby notified that any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
message is STRICTLY PROHIBITED. If you have received this transmission in 
error, please immediately notify the sender and destroy the original 
transmission and its attachments without reading them or saving them to disk. 
Thank you.


Confidential - Limited Access and Use
-


This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
emc-p...@ieee.org<mailto:emc-p...@ieee.org>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html<https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2Femc-pstc.html=05%7C01%7CLauren.Crane%40lamresearch.com%7C5317f52310f242f1c2e908dac42f7853%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638038005430531882%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=Vte%2FnZ%2B17XLGNauSiLBMrTPMaozehiVnboY6qTALYxo%3D=0>

Website: 
http://www.ieee-pses.org/<https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2F=05%7C01%7CLauren.Crane%40lamresearch.com%7C5317f52310f242f1c2e908dac42f7853%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638038005430531882%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=qmqIxJxNlJDBvPL29ilEroGmkxbpS4l8VH3c9CH3B10%3D=0>
Instructions: http://www.ieee-pses.org/list.html (including how to 
unsubscribe)<https://nam02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2Flist.html=05%7C01%7CLauren.Crane%40lamresearch.com%7C5317f52310f242f1c2e908dac42f7853%7C918079dbc9024e29b22c9764410d0375%7C0%7C0%7C638038005430531882%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C300

Re: [PSES] SI amendment providing UKCA label deadline extension.

[Scott Aldous]

Hi Lauren,

It's a good question. A draft amendment was published on 6 September to
effect the extension, but the draft was withdrawn on 10 October, stating
that "a new version will be published in due course". More information here

.

ExVeritas published an article on this on 3 November (in the context of
ATEX Directive but generally applicable). You can find that article here
.
Unfortunately the article doesn't give much more information.

On Wed, Nov 9, 2022 at 11:14 AM Lauren Crane <
1afd08519f18-dmarc-requ...@listserv.ieee.org> wrote:

> Hello All,
>
>
>
> Among all the UKCA discussion I have not noticed information on whether
> the promised no-label extension to 2026, though promised on government
> websites, is actually in the works with hope of becoming law before Jan 1,
> 2023.
>
>
>
> Does anyone have information on this point?
>
>
>
> Best Regards,
>
> -Lauren
>
>
>
> LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any
> documents, files, or previous e-mail messages attached to it,
> (collectively, "E-mail Transmission") may be subject to one or more of the
> following based on the associated sensitivity level: E-mail Transmission
> (i) contains confidential information, (ii) is prohibited from distribution
> outside of Lam, and/or (iii) is intended solely for and restricted to the
> specified recipient(s). If you are not the intended recipient, or a person
> responsible for delivering it to the intended recipient, you are hereby
> notified that any disclosure, copying, distribution or use of any of the
> information contained in or attached to this message is STRICTLY
> PROHIBITED. If you have received this transmission in error, please
> immediately notify the sender and destroy the original transmission and its
> attachments without reading them or saving them to disk. Thank you.
>
> Confidential – Limited Access and Use
> -
> 
>
> This message is from the IEEE Product Safety Engineering Society emc-pstc
> discussion list. To post a message to the list, send your e-mail to 
> emc-p...@ieee.org
>
> All emc-pstc postings are archived and searchable on the web at:
> http://www.ieee-pses.org/emc-pstc.html
>
> Website: http://www.ieee-pses.org/
> Instructions: http://www.ieee-pses.org/list.html (including how to
> unsubscribe) 
> List rules: http://www.ieee-pses.org/listrules.html
>
> For help, send mail to the list administrators:
> Mike Cantwell mcantw...@ieee.org
>
> For policy questions, send mail to:
> Jim Bacher j.bac...@ieee.org
> David Heald dhe...@gmail.com
> --
>
> To unsubscribe from the EMC-PSTC list, click the following link:
> https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1
>


-- 
Scott Aldous | Regulatory Compliance Manager | scottald...@google.com |
 650-253-1994

-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1