[PSES] Fwd: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

2022-12-08 Thread Douglas Nix 

From: Douglas Nix 
Subject: Re: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment 
providing UKCA label deadline extension.
Date: December 7, 2022 at 17:30:26 EST
To: "Stultz, Mark" 

Colleagues,

House of Lords debate on the draft UKCA marking provisional statutory 
instrument is scheduled for 13-Dec: 
https://lordsbusiness.parliament.uk/ItemOfBusiness?itemOfBusinessId=119449=38=2022-12-13


--
Doug Nix
d...@mac.com

“The highest form of ignorance is when you reject something you don't know 
anything about.” ~Wayne Dyer


-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

Re: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

2022-11-28 Thread Richard Georgerian 
Thank-you Mark,

 

.Richard Georgerian

Compliance Engineer

HID Global

 

From: Stultz, Mark  
Sent: Monday, November 28, 2022 8:48 AM
To: Richard Georgerian ;
EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] Link to secondary legislation draft RE: [PSES] SI
amendment providing UKCA label deadline extension.

 

The draft instrument Product Safety and Metrology (Amendment and
Transitional

Provisions) Regulations 2022 was reviewed and approved by the Joint
Committee on Statutory Instruments on 2022-11-23 (

https://committees.parliament.uk/publications/31741/documents/178147/default
/)

 

It now needs to be approved by parliament.  You can track the progress be
checking the daily order paper
(https://commonsbusiness.parliament.uk/Document/61034/Html?subType=Standard#
20221128-287)

As of today, it is still in the "Remaining Orders and Notices" section which
means that it has not yet been scheduled for a vote.

 

Best regards,

 

Mark Stultz | CMSER | Sealed Air | Automated Packaging Systems |
Streetsboro, OH | 330-342-2402

 

From: Richard Georgerian mailto:richa...@mesanetworks.net> > 
Sent: Monday, 28 November, 2022 10:41 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> 
Subject: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment
providing UKCA label deadline extension.

 

 

 CAUTION: This email originated from outside of the organization. Do not
click links or open attachments unless you recognize the sender and know the
content is safe.

 

Greetings all,

 

I have been monitoring the following websites to see when the UKCA
legislation has been implemented regarding the easement of the IUKCA marking
to 31 DEC 2024. Other than the website below advising that it has been
extended to 31 DEC 2024, the actual legislation for the extension cannot be
found.

 

https://www.gov.uk/guidance/using-the-ukca-marking#full-publication-update-h
istory
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.gov.u
k%2Fguidance%2Fusing-the-ukca-marking%23full-publication-update-history
=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C
2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468966940522%7CUnknown%7CTW
FpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D
%7C3000%7C%7C%7C=OADfSMBXzH9xjNAZY8GaU7LgHug%2FuQmNF9uEpS3J58k%3D
rved=0> : advising that it has been extended to 31 DEC 2024. (However, the
actual legislation for the extension cannot be found.)

 

https://www.legislation.gov.uk/primary+secondary?title=The%20Product%20Safet
y%20and%20Metrology
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.legis
lation.gov.uk%2Fprimary%2Bsecondary%3Ftitle%3DThe%2520Product%2520Safety%252
0and%2520Metrology=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d771
4c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C6380524689
67096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI
6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=h38jw6Hk4csTH0nXthcmLJYX0iX9ba
gPne9tP3hzlsw%3D=0> : lists of all the "The Product Safety and
Metrology " regarding the original implementation of the UKCA marking for 31
DEC 2022, which is still on course if the easement has not yet been passed.

 

https://www.legislation.gov.uk/uksi/2022/1200-1299
<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.legis
lation.gov.uk%2Fuksi%2F2022%2F1200-1299=05%7C01%7Cmark.stultz%40sealeda
ir.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd
%7C0%7C0%7C638052468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLC
JQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=osKdTKMcq
mrrjXyhEUiRee8ajW4AcLRZMM2Uuab530M%3D=0> : Shows timeline of all SI
legislations.

 

Thanks in-advance for the assistance.

 

.Richard Georgerian

Compliance Engineer

HID Global

-


This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
mailto:emc-p...@ieee.org> >

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-p
ses.org%2Femc-pstc.html=05%7C01%7Cmark.stultz%40sealedair.com%7Cce08183
9d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C63805
2468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLC
JBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=J1VPMd%2Bmwjy8JLSt3%2BT%2
FSA1GuUljqe7WOlhyWhyXyJg%3D=0> 

Website: http://www.ieee-pses.org/
<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-p
ses.org%2F=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c
08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468967096739
%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMD

Re: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

2022-11-28 Thread Stultz, Mark 
The draft instrument Product Safety and Metrology (Amendment and Transitional
Provisions) Regulations 2022 was reviewed and approved by the Joint Committee 
on Statutory Instruments on 2022-11-23 (
https://committees.parliament.uk/publications/31741/documents/178147/default/)

It now needs to be approved by parliament.  You can track the progress be 
checking the daily order paper 
(https://commonsbusiness.parliament.uk/Document/61034/Html?subType=Standard#20221128-287)
As of today, it is still in the "Remaining Orders and Notices" section which 
means that it has not yet been scheduled for a vote.

Best regards,

Mark Stultz | CMSE(r) | Sealed Air | Automated Packaging Systems | Streetsboro, 
OH | 330-342-2402

From: Richard Georgerian 
Sent: Monday, 28 November, 2022 10:41 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment 
providing UKCA label deadline extension.


 CAUTION: This email originated from outside of the organization. Do not click 
links or open attachments unless you recognize the sender and know the content 
is safe.

Greetings all,

I have been monitoring the following websites to see when the UKCA legislation 
has been implemented regarding the easement of the IUKCA marking to 31 DEC 
2024. Other than the website below advising that it has been extended to 31 DEC 
2024, the actual legislation for the extension cannot be found.

https://www.gov.uk/guidance/using-the-ukca-marking#full-publication-update-history<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.gov.uk%2Fguidance%2Fusing-the-ukca-marking%23full-publication-update-history=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468966940522%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=OADfSMBXzH9xjNAZY8GaU7LgHug%2FuQmNF9uEpS3J58k%3D=0>:
 advising that it has been extended to 31 DEC 2024. (However, the actual 
legislation for the extension cannot be found.)

https://www.legislation.gov.uk/primary+secondary?title=The%20Product%20Safety%20and%20Metrology<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.legislation.gov.uk%2Fprimary%2Bsecondary%3Ftitle%3DThe%2520Product%2520Safety%2520and%2520Metrology=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=h38jw6Hk4csTH0nXthcmLJYX0iX9bagPne9tP3hzlsw%3D=0>:
 lists of all the "The Product Safety and Metrology " regarding the original 
implementation of the UKCA marking for 31 DEC 2022, which is still on course if 
the easement has not yet been passed.

https://www.legislation.gov.uk/uksi/2022/1200-1299<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.legislation.gov.uk%2Fuksi%2F2022%2F1200-1299=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=osKdTKMcqmrrjXyhEUiRee8ajW4AcLRZMM2Uuab530M%3D=0>:
 Shows timeline of all SI legislations.

Thanks in-advance for the assistance.

...Richard Georgerian
Compliance Engineer
HID Global
-


This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
mailto:emc-p...@ieee.org>>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2Femc-pstc.html=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=J1VPMd%2Bmwjy8JLSt3%2BT%2FSA1GuUljqe7WOlhyWhyXyJg%3D=0>

Website: 
http://www.ieee-pses.org/<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2F=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C=UTYAIHryCeDichYizne8VFV5uFZcta5w%2Fd6korM1vZM%3D=0>
Instructions: http://www.ieee-pses.org/list.html (including how to 
unsubscribe)<https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ieee-pses.org%2Flist.html=05%7C01%7Cmark.stultz%40sealedair.com%7Cce081839d7714c1e9f3c08dad1570796%7C2691a2514c384643af0b0c0982f197bd%7C0%7C0%7C638052468967096739%7CUnknown%7CTWFpbGZsb3d8eyJWIjo

[PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

2022-11-28 Thread Richard Georgerian 
Greetings all,

 

I have been monitoring the following websites to see when the UKCA
legislation has been implemented regarding the easement of the IUKCA marking
to 31 DEC 2024. Other than the website below advising that it has been
extended to 31 DEC 2024, the actual legislation for the extension cannot be
found.

 

https://www.gov.uk/guidance/using-the-ukca-marking#full-publication-update-h
istory: advising that it has been extended to 31 DEC 2024. (However, the
actual legislation for the extension cannot be found.)

 

https://www.legislation.gov.uk/primary+secondary?title=The%20Product%20Safet
y%20and%20Metrology: lists of all the "The Product Safety and Metrology "
regarding the original implementation of the UKCA marking for 31 DEC 2022,
which is still on course if the easement has not yet been passed.

 

https://www.legislation.gov.uk/uksi/2022/1200-1299: Shows timeline of all SI
legislations.

 

Thanks in-advance for the assistance.

 

.Richard Georgerian

Compliance Engineer

HID Global


-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

Re: [PSES] SV: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

2022-11-25 Thread Charlie Blackham 
Amund

At the bottom of this page https://www.gov.uk/guidance/using-the-ukca-marking

Best regards
Charlie

Charlie Blackham
Sulis Consultants Ltd
Tel: +44 (0)7946 624317
Web: https://sulisconsultants.com/
Registered in England and Wales, number 05466247

From: Amund Westin 
Sent: 25 November 2022 08:02
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] SV: [PSES] Link to secondary legislation draft RE: [PSES] SI 
amendment providing UKCA label deadline extension.

Sorry if I have missed that information, but where can I find requirements for 
the UKCA logo which shall be affixed to the product. Need the check out the 
shape, minimum size, etc. Just like the CE logo has requirements.

Thanks!

BR
Amund



Fra: Lauren Crane
Sendt: 16. november 2022 16:41
Til: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG>
Emne: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment 
providing UKCA label deadline extension.

Hello All,

In case you are interested in seeing it is more concretely true, here is a link 
to the secondary legislation laid before parliament that is a proposal to 
modify many (most/all) of the UKCA SI's with the extended date. Click on "full 
wording" top left, to see the draft.

https://statutoryinstruments.parliament.uk/instrument/Iej3CpFt/

Best Regards,
-Lauren

LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any 
documents, files, or previous e-mail messages attached to it, (collectively, 
"E-mail Transmission") may be subject to one or more of the following based on 
the associated sensitivity level: E-mail Transmission (i) contains confidential 
information, (ii) is prohibited from distribution outside of Lam, and/or (iii) 
is intended solely for and restricted to the specified recipient(s). If you are 
not the intended recipient, or a person responsible for delivering it to the 
intended recipient, you are hereby notified that any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
message is STRICTLY PROHIBITED. If you have received this transmission in 
error, please immediately notify the sender and destroy the original 
transmission and its attachments without reading them or saving them to disk. 
Thank you.


Confidential - Limited Access and Use
-


This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
mailto:emc-p...@ieee.org>>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to 
unsubscribe)<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell mailto:mcantw...@ieee.org>>

For policy questions, send mail to:
Jim Bacher mailto:j.bac...@ieee.org>>
David Heald mailto:dhe...@gmail.com>>



To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1
-


This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
mailto:emc-p...@ieee.org>>

All emc-pstc postings are archived and searchable on the web at: 
http://www.ieee-pses.org/emc-pstc.html

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to 
unsubscribe)<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell mailto:mcantw...@ieee.org>>

For policy questions, send mail to:
Jim Bacher mailto:j.bac...@ieee.org>>
David Heald mailto:dhe...@gmail.com>>



To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

[PSES] SV: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

2022-11-25 Thread Amund Westin 
Sorry if I have missed that information, but where can I find requirements
for the UKCA logo which shall be affixed to the product. Need the check out
the shape, minimum size, etc. Just like the CE logo has requirements.

 

Thanks!

 

BR
Amund

 

 

 

Fra: Lauren Crane 
Sendt: 16. november 2022 16:41
Til: EMC-PSTC@LISTSERV.IEEE.ORG
Emne: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment
providing UKCA label deadline extension.

 

Hello All, 

 

In case you are interested in seeing it is more concretely true, here is a
link to the secondary legislation laid before parliament that is a proposal
to modify many (most/all) of the UKCA SI's with the extended date. Click on
"full wording" top left, to see the draft. 

 

https://statutoryinstruments.parliament.uk/instrument/Iej3CpFt/

 

Best Regards, 

-Lauren


LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any
documents, files, or previous e-mail messages attached to it, (collectively,
"E-mail Transmission") may be subject to one or more of the following based
on the associated sensitivity level: E-mail Transmission (i) contains
confidential information, (ii) is prohibited from distribution outside of
Lam, and/or (iii) is intended solely for and restricted to the specified
recipient(s). If you are not the intended recipient, or a person responsible
for delivering it to the intended recipient, you are hereby notified that
any disclosure, copying, distribution or use of any of the information
contained in or attached to this message is STRICTLY PROHIBITED. If you have
received this transmission in error, please immediately notify the sender
and destroy the original transmission and its attachments without reading
them or saving them to disk. Thank you.

 

Confidential - Limited Access and Use

-


This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
mailto:emc-p...@ieee.org> >

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe) <http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Mike Cantwell mailto:mcantw...@ieee.org> > 

For policy questions, send mail to:
Jim Bacher mailto:j.bac...@ieee.org> >
David Heald mailto:dhe...@gmail.com> > 

  _  

To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC
<https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1> =1 


-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

Re: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

2022-11-22 Thread John E Allen 
FYI, the latest CMS Law-Now report on progress of the legislation  

https://www.cms-lawnow.com/ealerts/2022/11/the-uk-government-will-review-the
-broadcast-rules-on-listed-sporting-events?cc_lang=en

 

John E Allen

W. London, UK

 

From: Lauren Crane <1afd08519f18-dmarc-requ...@listserv.ieee.org> 
Sent: 16 November 2022 15:41
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment
providing UKCA label deadline extension.

 

Hello All, 

 

In case you are interested in seeing it is more concretely true, here is a
link to the secondary legislation laid before parliament that is a proposal
to modify many (most/all) of the UKCA SI's with the extended date. Click on
"full wording" top left, to see the draft. 

 

https://statutoryinstruments.parliament.uk/instrument/Iej3CpFt/

 

Best Regards, 

-Lauren


LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any
documents, files, or previous e-mail messages attached to it, (collectively,
"E-mail Transmission") may be subject to one or more of the following based
on the associated sensitivity level: E-mail Transmission (i) contains
confidential information, (ii) is prohibited from distribution outside of
Lam, and/or (iii) is intended solely for and restricted to the specified
recipient(s). If you are not the intended recipient, or a person responsible
for delivering it to the intended recipient, you are hereby notified that
any disclosure, copying, distribution or use of any of the information
contained in or attached to this message is STRICTLY PROHIBITED. If you have
received this transmission in error, please immediately notify the sender
and destroy the original transmission and its attachments without reading
them or saving them to disk. Thank you.

 

Confidential - Limited Access and Use

-


This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
mailto:emc-p...@ieee.org> >

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe) <http://www.ieee-pses.org/list.html> 
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Mike Cantwell mailto:mcantw...@ieee.org> > 

For policy questions, send mail to:
Jim Bacher mailto:j.bac...@ieee.org> >
David Heald mailto:dhe...@gmail.com> > 

  _  

To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC
<https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1> =1 


-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

Re: [PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

2022-11-16 Thread Scott Xe 
Lauren, tks for sharing!

Cheers,

Scott

On Wed, 16 Nov 2022 at 23:41, Lauren Crane <
1afd08519f18-dmarc-requ...@listserv.ieee.org> wrote:

> Hello All,
>
>
>
> In case you are interested in seeing it is more concretely true, here is a
> link to the secondary legislation laid before parliament that is a proposal
> to modify many (most/all) of the UKCA SI’s with the extended date. Click on
> “full wording” top left, to see the draft.
>
>
>
> https://statutoryinstruments.parliament.uk/instrument/Iej3CpFt/
>
>
>
> Best Regards,
>
> -Lauren
>
> LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any
> documents, files, or previous e-mail messages attached to it,
> (collectively, "E-mail Transmission") may be subject to one or more of the
> following based on the associated sensitivity level: E-mail Transmission
> (i) contains confidential information, (ii) is prohibited from distribution
> outside of Lam, and/or (iii) is intended solely for and restricted to the
> specified recipient(s). If you are not the intended recipient, or a person
> responsible for delivering it to the intended recipient, you are hereby
> notified that any disclosure, copying, distribution or use of any of the
> information contained in or attached to this message is STRICTLY
> PROHIBITED. If you have received this transmission in error, please
> immediately notify the sender and destroy the original transmission and its
> attachments without reading them or saving them to disk. Thank you.
>
> Confidential – Limited Access and Use
> -
> 
>
> This message is from the IEEE Product Safety Engineering Society emc-pstc
> discussion list. To post a message to the list, send your e-mail to 
> emc-p...@ieee.org
>
> All emc-pstc postings are archived and searchable on the web at:
> http://www.ieee-pses.org/emc-pstc.html
>
> Website: http://www.ieee-pses.org/
> Instructions: http://www.ieee-pses.org/list.html (including how to
> unsubscribe) 
> List rules: http://www.ieee-pses.org/listrules.html
>
> For help, send mail to the list administrators:
> Mike Cantwell mcantw...@ieee.org
>
> For policy questions, send mail to:
> Jim Bacher j.bac...@ieee.org
> David Heald dhe...@gmail.com
> --
>
> To unsubscribe from the EMC-PSTC list, click the following link:
> https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1
>

-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1

[PSES] Link to secondary legislation draft RE: [PSES] SI amendment providing UKCA label deadline extension.

2022-11-16 Thread Lauren Crane 
Hello All,

In case you are interested in seeing it is more concretely true, here is a link 
to the secondary legislation laid before parliament that is a proposal to 
modify many (most/all) of the UKCA SI's with the extended date. Click on "full 
wording" top left, to see the draft.

https://statutoryinstruments.parliament.uk/instrument/Iej3CpFt/

Best Regards,
-Lauren

LAM RESEARCH CONFIDENTIALITY NOTICE: This e-mail transmission, and any 
documents, files, or previous e-mail messages attached to it, (collectively, 
"E-mail Transmission") may be subject to one or more of the following based on 
the associated sensitivity level: E-mail Transmission (i) contains confidential 
information, (ii) is prohibited from distribution outside of Lam, and/or (iii) 
is intended solely for and restricted to the specified recipient(s). If you are 
not the intended recipient, or a person responsible for delivering it to the 
intended recipient, you are hereby notified that any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
message is STRICTLY PROHIBITED. If you have received this transmission in 
error, please immediately notify the sender and destroy the original 
transmission and its attachments without reading them or saving them to disk. 
Thank you.


Confidential - Limited Access and Use

-

This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 


All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Mike Cantwell 

For policy questions, send mail to:
Jim Bacher:  
David Heald: 
_
To unsubscribe from the EMC-PSTC list, click the following link: 
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC=1