In general, and for UL and CSA in particular, crimped terminals are evaluated
for the number, size, stranding and types of wire under the crimp.
In most cases, only single wires are evaluated, unless the manufacturer
specifies that they want additional testing.
Wire sizes are critical for any
t; *Van:* Doug Powell [mailto:doug...@gmail.com]
> *Verzonden:* dinsdag 21 februari 2017 16:45
> *Aan:* EMC-PSTC@LISTSERV.IEEE.ORG
> *Onderwerp:* Re: [PSES] crimp hardware for multiple conductors?
>
>
>
> I've had experience with this in a few types of products, using bo
Most safety standards require both insulation and wire to be fastened to be
acceptable
Back in the old days of tube TVs, the power switch was commonly on the back of
the volume control. The switch terminals had holes through which the mains
wire was threaded and then soldered.
With
://img.conrad.de/medias/global/ce/3000_3999/3900/3930/3934/393416_BB_00_FB.EPS.jpg
Gert gremmen
Van: Doug Powell [mailto:doug...@gmail.com]
Verzonden: dinsdag 21 februari 2017 16:45
Aan: EMC-PSTC@LISTSERV.IEEE.ORG
Onderwerp: Re: [PSES] crimp hardware for multiple conductors?
I've had
: [PSES] crimp hardware for multiple conductors?
I would appreciate pointers for locating ring and quick disconnect crimp
hardware which are approved for multiple conductor use.
I've had conversations with two major manufacturers so far. One confirmed a
quick disconnect terminal family
nd
>
>
>
> Sylvae in aeternum manent.
>
>
>
> *From:* Adam Dixon [mailto:lanterna.viri...@gmail.com]
> *Sent:* Tuesday, February 21, 2017 1:48 PM
> *To:* John Woodgate <jmw1...@btinternet.com>
> *Cc:* EMC-PSTC@listserv.ieee.org
> *Subject:* Re: [PSES] crimp har
<jmw1...@btinternet.com>
Cc: EMC-PSTC@listserv.ieee.org
Subject: Re: [PSES] crimp hardware for multiple conductors?
Thanks, John.
IEC 60352-2 Section 10.2 "Crimped connections made with more than one wire in a
crimp barrel" briefly addresses general considerations and closes with the
hes DESIGN IT IN! OOO – Own Opinions Only
>
> www.jmwa.demon.co.uk J M Woodgate and Associates Rayleigh England
>
>
>
> Sylvae in aeternum manent.
>
>
>
> *From:* Adam Dixon [mailto:lanterna.viri...@gmail.com]
> *Sent:* Tuesday, February 21, 2017 12:45 PM
> *To
ary 21, 2017 12:45 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] crimp hardware for multiple conductors?
I would appreciate pointers for locating ring and quick disconnect crimp
hardware which are approved for multiple conductor use.
I've had conversations with two major manufacturers
I would appreciate pointers for locating ring and quick disconnect crimp
hardware which are approved for multiple conductor use.
I've had conversations with two major manufacturers so far. One confirmed
a quick disconnect terminal family that supports multiple conductors
provided that the summed
10 matches
Mail list logo
