I need to start cnc'ing metal.
Anders, how long (machine time) did it take to cut the mould in the first
picture?
Also, were there tool changes used, i.e., roughing, finishing?
- Original Message -
From: "Anders Wallin" <[EMAIL PROTECTED]>
> aluminium rudder mould (rudder is made with c
John Kasunich wrote:
I should proofread before I hit send, not after:
> If countX looks OK, then its time to look at the motion controller.
> "show pin axis.0.jog" will show you the jogging related pins.
> jog-counts should have the same value as countX. jog-enable should
> be TRUE. jog-vel-mod
Kirk wrote:
> I attached the hal file on the last message. I am also attaching it
> again here. The link to the file on the wiki is
> http://wiki.linuxcnc.org/uploads/joypad.hal
Oops... I apologize, I missed the attachment.
The hal file shows that you are NOT using halui for jogging, only
for
Hi Dean,
It's good to hear that there are still some that do that!
Dale
Dean Hedin wrote:
> Believe it or not, I "hand roll" most of my g-code.
> I have a written a lot of custom programs to deal with each task as I come
> upon it.
>
>
>
> - Original Message -
> From: "Mike :0)" <[E
Hi Dean, Gene,
This is coming from a Toolmaker and I also make guitars. If it were
metal I'd say yes all but the final finish could be done on the machine.
Knowing wood the way I do I have to say Dean is right about the tearout.
As a toolmaker and woodworker I understand first hand that just ne
I attached the hal file on the last message. I am also attaching it
again here. The link to the file on the wiki is
http://wiki.linuxcnc.org/uploads/joypad.hal
Kirk
On Tue, 2007-03-27 at 19:57 -0400, John Kasunich wrote:
> Kirk wrote:
> > I am using the joypad.hal file located on the wiki. I h
Believe it or not, I "hand roll" most of my g-code.
I have a written a lot of custom programs to deal with each task as I come
upon it.
- Original Message -
From: "Mike :0)" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, March 27, 2007 12:02 PM
Subject: Re: [Emc-users] Pics and Examples
> G
> My guess is that with that, you could
> cut every groove the the checkering file will finish at 24 tpi if you
> wanted to go that fine,
No Gene, can't do it. Lord knows I've tried.
Too much tear out occurs even with the tiniest of bits. The net result is
lost diamonds.
The best I have been ab
Kirk wrote:
> I am using the joypad.hal file located on the wiki. I have of course
> modified it for my machine. I am loading halui and using it to control
> various functions via buttons on the joypad. The previous version of
> EMC was 2.1.3 which I obtained via Ubuntu Synaptic Package Manager.
I am using the joypad.hal file located on the wiki. I have of course
modified it for my machine. I am loading halui and using it to control
various functions via buttons on the joypad. The previous version of
EMC was 2.1.3 which I obtained via Ubuntu Synaptic Package Manager. I
also updated to
Stuart Stevenson wrote:
> Gentlemen,
> I had read the manual about the axis.N.index-enable. I had tried
> these commands.
I have updated the sample config file set that is on my web
pages at http://jelinux.pico-systems.com/codes/ppmc/
These are the actual files off my Bridgeport conversion, a
that video made my pu**y wet... and i am male! truly amazing...
i'm building a 3 axis CNC engraver/mini-mini mill currently. i'm using a
SP3 controller board. anyone set this baby up with emc yet? i think it
came from CNCZONE.COMi haven't turned it on yet because i am lacking my
limit s
Guys, those are all some great examples.
What software was used to generate the toolpaths?
Thank you all for the hard work.
Mike
Don't pick lemons.
See all the new 2007 cars at Yahoo! Autos.
http://autos.yah
John Kasunich wrote:
> > there should be a HAL pin from the driver called
> > ppmc.N.encoder.M.index-enable
>
> index-enable, not index.
Looking at the code, I see that older versions of the PPMC
might not export the index-enable pin. If you load the driver
and "show pin ppmc.0.encoder.02" sh
Stuart Stevenson wrote:
> Gentlemen,
> I had read the manual about the axis.N.index-enable. I had tried
> these commands. I am working with my Z axis as this is the easiest to
> reach.
>
> ###
>
> linkpp axis.2.index-enable ppmc.0.encoder.02.index
OK, first thing
Gentlemen,
I had read the manual about the axis.N.index-enable. I had tried
these commands. I am working with my Z axis as this is the easiest to
reach.
###
linkpp axis.2.index-enable ppmc.0.encoder.02.index
this gives me the error as follows
HAL: ERROR: signal '
Uhm, mine did not work with 2.1.2 and 2.1.3 but now with the 2.1.4 works
fine.
Please post your hal file.
Manfredi
My website: www.m24-pro.com
>From: Kirk <[EMAIL PROTECTED]>
>Reply-To: "Enhanced Machine Controller (EMC)"
>
>To: "Enhanced Machine Controller (EMC)"
>Subject: [Emc-users] Jo
17 matches
Mail list logo