Hi,
then try to do show pin from halcmd and see if the pin halui.program.run pin
exist.
It is possible that some of the halui pins you see in the documentation are
not yet available in the official release but only in the last development
version.
After that, I will ask for you in the chat, or
Thanks John, Those are all very good tips.
I do have a variac and an isolation transformer, but
I think I want to get a hold of the tachometer before I start the
experiment.
- Original Message -
From: "John Kasunich" <[EMAIL PROTECTED]>
To: "Enhanced Machine Controller (EMC)"
Sent: Mond
Larry Kopas wrote:
> greetings,
>
> where do I find files to program mesa card for stepper motors. I
> downloaded latest emc2 release from sf. I do see some hdl files but
> nothing related to steppers. do I need to program everytime I power up
> the computer? what utility is used to program
greetings,
where do I find files to program mesa card for stepper motors. I downloaded
latest emc2 release from sf. I do see some hdl files but nothing related to
steppers. do I need to program everytime I power up the computer? what
utility is used to program the card in user mode?
tia
Larry
Dean Hedin wrote:
> This is a revisit of this topic. Some time ago we were discussing the tiny
> bit problem
> and what type of motor would be best for this.
>
> Yesterday I picked up what I believe will be my new emc machine.
> Some time ago, where my brother worked. they disposed of some old pr
This is a revisit of this topic. Some time ago we were discussing the tiny
bit problem
and what type of motor would be best for this.
Yesterday I picked up what I believe will be my new emc machine.
Some time ago, where my brother worked. they disposed of some old printed
circuit board routing m
I posted a letter halui.program.run? I got one reply from Manfredi and I tried
what he mentioned but I'm still hung up
can a hardware switch be linked through halui to button.program-run or
halui.program.run or am I wasting everyone's time?
I'm trying to pull the pin low,is it expecting a high
On Monday 07 May 2007, Dean Hedin wrote:
>Gene, You should find a lighter spring if possible.
>
>I don't think Chris will need the type of probe that you and I have made.
>To do a "crawling" type of probing algorithm they will require a probe
>that can side trigger as well.
With a lighter spring,
Hi,
First, in your .ini file, I think you've to add the line HALUI = halui just
below the line [HAL], so you will have:
[HAL]
HALUI = halui
# The run script first uses halcmd to execute any HALFILE
# files, and then to execute any individual HALCMD commands.
#
# list of hal config files to ru
