At 09:55 AM 11/28/2008, you wrote:
Gentlemen,
My comments are not focused on real time. An analogy may be helpful.
In our shop we have 3 axis mills, 4 axis mills and 5 axis mills. I
tell the shop to put everything on the 5 axis mills until they are
full and then let the overflow (3 axis
At 12:07 PM 11/28/2008, you wrote:
Having a UPS(s) to bridge the time between mains outage to generator
output was part of the plan. I would bridge just the equipment needed.
If I can boot the generator controller in a minute or two, it won't need
to be on all of the time. I'd like to save energy
On Saturday 29 November 2008, Mark Wendt (Contractor) wrote:
At 12:07 PM 11/28/2008, you wrote:
Having a UPS(s) to bridge the time between mains outage to generator
output was part of the plan. I would bridge just the equipment needed.
If I can boot the generator controller in a minute or two, it
Hi everyone:
I know this is off topic but maybe somebody on the list
find it useful. I have just read about the HP magical give away
contest and want to let you know about it, basically they are
going to give various laptop and software through 50 blogs contests.
Well a free laptop is always
Mark Wendt (Contractor) wrote:
At 09:55 AM 11/28/2008, you wrote:
Gentlemen,
... snipped ...
The application of EMC2 to many and various projects (not just real
time) would lead to a clearing of the 'real time geek fog' surrounding
this type of project. We need to take the IFM button
Not quite. Most UPS's around 2KVA and below are 'off-line', ie straight
feed-through. Far far cheaper to make. You pay through your ears for an
on-line UPS as it requires a full power down and up converter.
Regards
Roland
2008/11/29 Mark Wendt (Contractor) [EMAIL PROTECTED]
Kirk,
ulises barrera wrote:
I apologize if the content of the message is inappropriate.
It is. Please don't do it again.
Regards,
John Kasunich
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Roland Jollivet wrote:
Not quite. Most UPS's around 2KVA and below are 'off-line', ie straight
feed-through. Far far cheaper to make. You pay through your ears for an
on-line UPS as it requires a full power down and up converter.
Every UPS has a full power down and up converter. How else
Hi jeff.
Im sorry about the message, I am not a spam sender,
I am a real emc user and i am not trying to sell anything,
my apologies to you and all the emc users.
It will not happen again.
Regards
Ulises
--- On Sat, 11/29/08, Jeff Epler [EMAIL PROTECTED] wrote:
From: Jeff Epler [EMAIL
Hi John:
I already got the message from Jeff, again my apologies
for the inappropiate message, will not do it again.
Regards
Ulises
--- On Sat, 11/29/08, John Kasunich [EMAIL PROTECTED] wrote:
From: John Kasunich [EMAIL PROTECTED]
Subject: Re: [Emc-users] HP contest
To: [EMAIL
I'm actually trying to read an analogue signal (High Voltage - say 1000VAC)
being applied to my heavy motor. Do I need an ADC converter or what is the
procedure?
Olusegun Abode
+234 8037045535
Email:[EMAIL PROTECTED]
--- On Fri, 11/28/08, Kirk Wallace [EMAIL PROTECTED] wrote:
From: Kirk
No I mean the voltmeter on the pyvcp - my-meter. Or let me rephrase my
question, what does pyvcp.my-meter read? and how is it used and connected?
Olusegun Abode
+234 8037045535
Email:[EMAIL PROTECTED]
--- On Fri, 11/28/08, Przemek Klosowski [EMAIL PROTECTED] wrote:
From: Przemek Klosowski
On Sat, 29 Nov 2008, Olusegun A. wrote:
Date: Sat, 29 Nov 2008 11:46:37 -0800 (PST)
From: Olusegun A. [EMAIL PROTECTED]
To: EMCuser2list emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] I need to connect my Voltmeter to actually read
I'm actually trying to read an analogue signal
There is the wiki on it, but even that does not explain it properly. If you
have a look at this;
http://www.pcrite.com/store/product_info.php?cPath=24products_id=360
which is typical of what you find in a computer store, you will find a
single, underrated inductor inside. During normal use, the
Olusegun A. wrote:
I'm actually trying to read an analogue signal (High Voltage -
say 1000VAC) being applied to my heavy motor. Do I need an
ADC converter or what is the procedure?
How heavy is your heavy motor?
You need to scale the 1000V down to a range that is safe for typical
integrated
[EMAIL PROTECTED] wrote:
Hi
i think it is working!
http://www.conceptmachinery.com/bigTUNEup.jpg
Ah, now I can see it! Is this using the PWM box I sold you? If so, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?PWM_Servo_Amplifiers
for specific info and example scope traces. Even if not
On Sat, 2008-11-29 at 11:46 -0800, Olusegun A. wrote:
I'm actually trying to read an analogue signal (High Voltage - say
1000VAC) being applied to my heavy motor. Do I need an ADC converter
or what is the procedure?
Olusegun Abode
+234 8037045535
Email:[EMAIL PROTECTED]
EMC2 only has
On Saturday 29 November 2008, John Kasunich wrote:
Olusegun A. wrote:
I'm actually trying to read an analogue signal (High Voltage -
say 1000VAC) being applied to my heavy motor. Do I need an
ADC converter or what is the procedure?
How heavy is your heavy motor?
[...]
To be blunt - if you have
Olusegun
Peter C. Wallace wrote:
On Sat, 29 Nov 2008, Olusegun A. wrote:
Date: Sat, 29 Nov 2008 11:46:37 -0800 (PST)
From: Olusegun A. [EMAIL PROTECTED]
To: EMCuser2list emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] I need to connect my Voltmeter to actually
read
I'm
Roland Jollivet wrote:
There is the wiki on it, but even that does not explain it properly. If you
have a look at this;
http://www.pcrite.com/store/product_info.php?cPath=24products_id=360
You don't put serious servers on such a UPS. I was thinking about smart
UPS that power one or more
20 matches
Mail list logo
