On Fri, 2011-03-18 at 20:58 -0500, Jon Elson wrote:
pre-measuring all your tools and entering the
length offsets in the tool table,
so you don't have to touch off at each tool change.
Or you can add a tool length probe station and have tool length
measurement happen automagically, without
On Fri, 2011-03-18 at 15:56 -0700, Doug wrote:
I need a way to execute a manual tool change. The documentation point to a
Axis_manualtoolchange.hal file to be located in the config. I am using the
Pico system boards for a controller. I cannt seem to find the this hal
file or how to install
Michael Jones wrote:
I am about to start an upgrade to my system and am wondering if anyone has
already done this and has some pointers, or better yet, a detailed how-to.
How about a G54 stepconf file:
http://wiki.linuxcnc.org/uploads/G540.stepconf
Copy the file into ~/emc2/configs, run
On Sat, Mar 19, 2011 at 09:13:27AM -0700, dave wrote:
I do a manual tool change by inserting a bit of code after the M6 ..
the steps are:
change tool
move to z - 0.5 above the part
adjust W manually so I can just move a 0.500 dia tool shank under the
cutter
hit resume and continue
On Sat, 2011-03-19 at 12:21 -0500, Chris Radek wrote:
On Sat, Mar 19, 2011 at 09:13:27AM -0700, dave wrote:
I do a manual tool change by inserting a bit of code after the M6 ..
the steps are:
change tool
move to z - 0.5 above the part
adjust W manually so I can just move a 0.500 dia
Igor, I did a search of Freqrol Z200 and your manual link came up first.
I assume you have one? I have three 2HP units and two control panels. I
am playing with decoding the panel interface so if the panels fail I can
still program these VFD's. Have you done anything with your Freqrol?
--
Kirk
Kirk, IIRC I sold everything that I wanted to sell. I no longer actively
buy/sell stuff, because income from my websites made that activity
economically unjustified.
You can find a programmer for those on ebay, that's where I got my
programmer panel.
I think that I have one freqrol left, but I