> Frank (and Gary):
>
> I like the basic idea of this monitor, although for another, non real-time
> project, so I thought I'd read up on DisplayLink.
>
> There is an open-source activity called freedesktop.org which apparently
is
> working on the displaylink interface to Linux.
>
> Quoting fro
2011/12/13 Jon Elson :
>
> Watch out for the CUI AMT-10x encoders at Digi-Key, they have a lag
> responding to acceleration, and
> may not be well-suited to CNC systems such as EMC2.
Thanks for the warning, Jon!
I happen to have bought these encoders for one of the machines...
Do I understand cor
Tom Easterday wrote:
> On Dec 12, 2011, at 9:38 PM, Jon Elson wrote:
>
>> Watch out for the CUI AMT-10x encoders at Digi-Key, they have a lag
>> responding to acceleration, and
>> may not be well-suited to CNC systems such as EMC2.
>>
>
> Jon,
> We are using these encoders on a gantry mach
On Dec 12, 2011, at 9:38 PM, Jon Elson wrote:
> Watch out for the CUI AMT-10x encoders at Digi-Key, they have a lag
> responding to acceleration, and
> may not be well-suited to CNC systems such as EMC2.
Jon,
We are using these encoders on a gantry machine and are currently trying to
debug a sm
Robert Pabon wrote:
> Where do you guys buy yours? Looking for affordable, quality units. Need .25"
> hollow shaft quadrature encoder, 2000ppr with L-D output. Anyone know a good
> source
Avago, US Digital and Renco come to mind. By hollow-shaft, do you mean
"kit" encoders?
Real hollow-shaft en
kqt4a...@gmail.com wrote:
> I have only been playing with cnc for about a year so I am not knowledgeable
> I think one of the main problems is rpms
> The smaller the bit the more you need
> The Colt will run at 30k but most die grinders are only maybe 24k
> So what will run 50-60K for hours at a ti
Where do you guys buy yours? Looking for affordable, quality units. Need .25"
hollow shaft quadrature encoder, 2000ppr with L-D output. Anyone know a good
source?
Rob
--
Systems Optimization Self Assessment
Improve effic
On 12/12/2011 3:08 PM, Frank Tkalcevic wrote:
> I tried to get a fingerVU 436 (480x272) working...
>
> http://www.soundgraph.com/fingervu436-feature-en
>
> I wanted to stick it into a pendant.
>
> All the USB monitors seem to use the displaylink drivers. You'll need to
> google for the drivers and
>
> From: gene heskett
>To: emc-users@lists.sourceforge.net
>Sent: Monday, December 12, 2011 2:58 PM
>Subject: Re: [Emc-users] USB display
>
>Hmmm. Never had any problems with USB sticks. That is how I transfer my G-code
>files from my Windows machine. I'm p
On Mon, 12 Dec 2011, Dave wrote:
> On 12/12/2011 3:25 PM, kqt4a...@gmail.com wrote:
>> On Mon, 12 Dec 2011, Edward Bernard wrote:
>>
>>
>>> Also, if you don't require high speeds this guy makes a small spindle that
>>> some guys are using for mill circuit boards: http://www.cnconabudget.com/.
>>>
Well it looked like a good idea. I currently have a 17 inch flat panel
monitor attached to it. Its a 8 year old Samsung and it works very well
so I'll stick with that.
Thanks for the replies
Gary Fiber K8IZ
On 12/12/2011 12:58 PM, gene heskett wrote:
> On Monday, December 12, 2011 03:55:01 PM
On Monday, December 12, 2011 04:44:01 PM kqt4a...@gmail.com did opine:
> On Mon, 12 Dec 2011, gene heskett wrote:
> > On Monday, December 12, 2011 04:01:26 PM Edward Bernard did opine:
> >> A trim router such as the Bosch Colt can be fitted with collets by
> >> Precise Bits
> >> (http://www.precis
On 12/12/2011 3:25 PM, kqt4a...@gmail.com wrote:
> On Mon, 12 Dec 2011, Edward Bernard wrote:
>
>
>> Also, if you don't require high speeds this guy makes a small spindle that
>> some guys are using for mill circuit boards: http://www.cnconabudget.com/.
>>
> Paul at cnconabudget made me
On Mon, 12 Dec 2011, gene heskett wrote:
> On Monday, December 12, 2011 04:01:26 PM Edward Bernard did opine:
>
>> A trim router such as the Bosch Colt can be fitted with collets by
>> Precise Bits (http://www.precisebits.com/gateways/ColletsNutsHome.htm).
>> Using very small endmills requires a c
On 12/12/2011 2:35 PM, Kent A. Reed wrote:
> On 12/12/2011 11:24 AM, Jon Elson wrote:
>
>>> On Monday, December 12, 2011 08:50:55 AM Mark Wendt did opine:
>>>
>>>
What amazes the heck out of me more often than not, is the fact
that I'm working at the "Naval Research Lab
On Monday, December 12, 2011 04:01:26 PM Edward Bernard did opine:
> A trim router such as the Bosch Colt can be fitted with collets by
> Precise Bits (http://www.precisebits.com/gateways/ColletsNutsHome.htm).
> Using very small endmills requires a collet with very little runout to
> avoid breakag
On Monday, December 12, 2011 03:55:01 PM Kent A. Reed did opine:
> On 12/12/2011 1:13 PM, Gary Fiber wrote:
> > Has anyone used a USB powered and driven video display with EMC2? I
> > see that Bestbuy has a nice sized AOC available for under $140.00 It
> > would be lighter than a normal VGA displa
On Monday, December 12, 2011 03:52:10 PM Kent A. Reed did opine:
> Gene, Mark, Jon:
>
> It seems to me the only essential difference between the rank amateur
> and the super-experienced user is the way they tell their stories about
> how they went wrong with confidence. The amateur talks with won
It all depends on your system and what you want to do.
I have found a Harbor Freight (cheep Chinese) laminate router an
inexpensive solution for my small (400x400x100mm) gantry router.
At $20 to $30 (depending on sales) it is cheap enough to have a spare
and replace if a problem. Cheap enough
I tried to get a fingerVU 436 (480x272) working...
http://www.soundgraph.com/fingervu436-feature-en
I wanted to stick it into a pendant.
All the USB monitors seem to use the displaylink drivers. You'll need to
google for the drivers and follow the instructions to install them. The
drivers didn
On 12 December 2011 20:18, wrote:
> Too many digits left of the decimal point
> I do this as a hobby
Well, so do I, but perhaps I have a higher hobby budget.
(I probably spent more than the price of that eBay spindle on material
in the last fortnight)
What equipment do you have? Perhaps one o
Gary,
There is emclcd which will drive any display supported by lcdproc
(http://lcdproc.org/). Lcdproc is in the Ubuntu repository, so you can
"apt-get install lcdproc". Then add "loadusr emclcd" to your hal file. I got
a basic display working, but never got around to making it particularly
config
On Mon, 12 Dec 2011, Edward Bernard wrote:
> Also, if you don't require high speeds this guy makes a small spindle that
> some guys are using for mill circuit boards: http://www.cnconabudget.com/.
Paul at cnconabudget made me a 1/8" tool holder for my Colt, great work, not
expensive
I have his
Oops, I should have looked at the link first. I was obviously thinking of a
small format LCD display.
Regards,
Eric
There is emclcd which will drive any display supported by lcdproc
(http://lcdproc.org/). Lcdproc is in the Ubuntu repository, so you can
"apt-get install lcdproc". Then add "loadu
On Mon, 12 Dec 2011, Kent A. Reed wrote:
> On 12/12/2011 11:24 AM, Jon Elson wrote:
>>> On Monday, December 12, 2011 08:50:55 AM Mark Wendt did opine:
>>>
What amazes the heck out of me more often than not, is the fact
that I'm working at the "Naval Research Lab", emphasis on "Rese
On Mon, 12 Dec 2011, Eric Keller wrote:
> I have been looking at an air spindle that goes for about $1800. The
> machinist at work has one, and he gets a lot of work out of it. Definitely
> 20 Dremels worth of work so far.
>
> I have some Moore powered spindles that I would like to use, but the
Also, if you don't require high speeds this guy makes a small spindle that some
guys are using for mill circuit boards: http://www.cnconabudget.com/.
>
> From: "kqt4a...@gmail.com"
>To: emc-users@lists.sourceforge.net
>Sent: Monday, December 12, 2011 1:10 PM
>S
On Mon, 12 Dec 2011, andy pugh wrote:
> On 12 December 2011 19:10, wrote:
>> I read a lot on this list about large spindles but what about small
>> What is the spindle of choice for 1/8" bits and smaller
>
> I have seen a few recommendations of the Bosch Colt router.
That is what I have been us
A trim router such as the Bosch Colt can be fitted with collets by Precise Bits
(http://www.precisebits.com/gateways/ColletsNutsHome.htm). Using very small
endmills requires a collet with very little runout to avoid breakage. The
Precise Bit collets are a big improvement over the stock collets.
Gary:
I left out part 2 of my answer.
Once you have a proper Linux driver for this display you need to see if
it disrupts the Linux/RTAI real-time performance that EMC2 depends on.
Regards,
Kent
--
Learn Windows Azure
On 12/12/2011 1:13 PM, Gary Fiber wrote:
> Has anyone used a USB powered and driven video display with EMC2? I see
> that Bestbuy has a nice sized AOC available for under $140.00
> It would be lighter than a normal VGA display.
>
> http://www.bestbuy.com/site/AOC+-+15.6%26%2334%3B+Widescreen+Flat-P
I have been looking at an air spindle that goes for about $1800. The
machinist at work has one, and he gets a lot of work out of it. Definitely
20 Dremels worth of work so far.
I have some Moore powered spindles that I would like to use, but the
technical side is beyond me right now.
Eric
On M
On 12/12/2011 11:24 AM, Jon Elson wrote:
>> On Monday, December 12, 2011 08:50:55 AM Mark Wendt did opine:
>>
>>> What amazes the heck out of me more often than not, is the fact
>>> that I'm working at the "Naval Research Lab", emphasis on "Research."
>>> That research demands a computing tec
On 12 December 2011 19:10, wrote:
> I read a lot on this list about large spindles but what about small
> What is the spindle of choice for 1/8" bits and smaller
I have seen a few recommendations of the Bosch Colt router.
Alternatively, the cheap Chinese spindles on eBay might be a useful upgra
I read a lot on this list about large spindles but what about small
What is the spindle of choice for 1/8" bits and smaller
A Dremel does not last very long
Richard
--
Learn Windows Azure Live! Tuesday, Dec 13, 2011
Mic
On Monday, December 12, 2011 12:52:25 PM andy pugh did opine:
> On 12 December 2011 17:34, Ralph Stirling
wrote:
> > I've been studying the documentation and the source code for
> > information on G-code readable/writeable parameters. I have yet to
> > find a good summary of all the defined par
Mark Wendt wrote:
>
> Ooops! Thank goodness for backups, right? Right? ;-)
>
> And slap silly the person who wrote the software that didn't create the
> files with date/time stamp info in the file name, relying rather on
> VMS's numbered versioning to differentiate between the files. Numbered
Has anyone used a USB powered and driven video display with EMC2? I see
that Bestbuy has a nice sized AOC available for under $140.00
It would be lighter than a normal VGA display.
http://www.bestbuy.com/site/AOC+-+15.6%26%2334%3B+Widescreen+Flat-Panel+LED+Portable+USB+Monitor/3698548.p?id=121842
On 12 December 2011 17:34, Ralph Stirling wrote:
> I've been studying the documentation and the source code for information on
> G-code readable/writeable parameters. I have yet to find a good summary of
> all the defined parameters in a single place. So far, I've found #5161-#5390
> and #5400-#
Hi
Is there a way to bring up the file load window with the date modified
field listed along with the ability to click on the top of the date
column to get into date modified order?
--
Regards
Ian Eagland
Eagland Machine Tools Ltd
http://www.eagland.co.uk/
-
I've been studying the documentation and the source code for information on
G-code readable/writeable parameters. I have yet to find a good summary of
all the defined parameters in a single place. So far, I've found #5161-#5390
and #5400-#5428 defined in interp_array.cc. #5061-5070 are defined i
On 12/12/2011 11:24 AM, Jon Elson wrote:
>
>> On Monday, December 12, 2011 08:50:55 AM Mark Wendt did opine:
>>
>>
>>> What amazes the heck out of me more often than not, is the fact
>>> that I'm working at the "Naval Research Lab", emphasis on "Research."
>>> That research demands
> On Monday, December 12, 2011 08:50:55 AM Mark Wendt did opine:
>
>>
>> What amazes the heck out of me more often than not, is the fact
>> that I'm working at the "Naval Research Lab", emphasis on "Research."
>> That research demands a computing technology at a pretty high level, and
>> t
On Monday, December 12, 2011 08:50:55 AM Mark Wendt did opine:
> On 12/12/2011 08:18 AM, gene heskett wrote:
> >> Gene,
> >>
> >> Being a sysadmin, mainly for Unix servers and such along with a ton
> >> of Winders users here at the Lab, I can honestly say "their
> >> considered opionion" is corre
Il giorno lun, 12/12/2011 alle 14.38 +0100, Spiderdab ha scritto:
> Il giorno lun, 12/12/2011 alle 13.09 +, andy pugh ha scritto:
> > On 12 December 2011 12:55, Spiderdab <77...@tiscali.it> wrote:
> >
> > > Yes i know this config, but i don't think it will work for me, since in
> > > my config
Il giorno lun, 12/12/2011 alle 13.09 +, andy pugh ha scritto:
> On 12 December 2011 12:55, Spiderdab <77...@tiscali.it> wrote:
>
> > Yes i know this config, but i don't think it will work for me, since in
> > my config halui.jog-speed is linked to joystick-slider.
>
> Link the output of the j
On 12/12/2011 08:18 AM, gene heskett wrote:
>> Gene,
>>
>> Being a sysadmin, mainly for Unix servers and such along with a ton of
>> Winders users here at the Lab, I can honestly say "their considered
>> opionion" is correct 99 times out of 100. ;-)
>>
>>
> Chuckle, probably so, but only bec
>One way to save confusion might be to change the name of one of the
>files, put your edits in there, then use the new name in the HAL file.
I tried how you have suggest me. I change a name of a file in armdroid. But
when I run emc2 I have these error:
- execv(armdroid): No such file or direct
On Monday, December 12, 2011 08:12:23 AM Mark Wendt did opine:
> On 12/11/2011 01:19 PM, gene heskett wrote:
> > For a new bee, the lingo can be confusing. We routinely do things in
> > linux because we can, that would give a windows administrator
> > nightmares as the user simply cannot be trust
On 12 December 2011 12:55, Spiderdab <77...@tiscali.it> wrote:
> Yes i know this config, but i don't think it will work for me, since in
> my config halui.jog-speed is linked to joystick-slider.
Link the output of the joystick slider to the mux input. (rather than
the constant "setp" lines).
In y
On 12 December 2011 12:48, Francesca Sca wrote:
> I would like to change puma560gui.py for the custom of the simulation of my
> robot. I go in emc2-dev/src/hal/user_comps/vismach and edit the file
> puma560gui.py. I save it and recompile
You probably don't need to recompile (though I would wai
Il giorno lun, 12/12/2011 alle 12.28 +, andy pugh ha scritto:
> On 12 December 2011 12:19, Spiderdab <77...@tiscali.it> wrote:
>
> > What i need to do is to enable joystick jog only when button1 is
> > pressed,to avoid accidental movements.
>
> Have a look at section 5 here:
> http://wiki.lin
Hallo,
I would like to change puma560gui.py for the custom of the simulation of my
robot. I go in emc2-dev/src/hal/user_comps/vismach and edit the file
puma560gui.py. I save it and recompile with this procedure:
cd emc2-dev/src
./autogen.sh
./configure
make
sudo make setuid
but the changes th
On 12 December 2011 12:19, Spiderdab <77...@tiscali.it> wrote:
> What i need to do is to enable joystick jog only when button1 is
> pressed,to avoid accidental movements.
Have a look at section 5 here:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Simple_Remote_Pendant
I have my joypad set up so th
Hi.
What i need to do is to enable joystick jog only when button1 is
pressed,to avoid accidental movements.
I think to do it with an if statement, but don't know how to implement
into hal commands.
I think i cannot use and2, because button is a bit, while value from the
stick is a float.
The only w
Le 11/12/2011 17:29, s...@highlab.com a écrit :
> That kind of separation is actually pretty awkward with the debian tools.
>
> But try pulling 2.5 and building the docs, i bet it will work now.:-)
>
>
hello
Still a compilation problem with the doc. But a different one this time :
(...)
a
On 12/11/2011 01:19 PM, gene heskett wrote:
> For a new bee, the lingo can be confusing. We routinely do things in linux
> because we can, that would give a windows administrator nightmares as the
> user simply cannot be trusted to do it himself. (in their considered
> opinion that is.) Sometimes
57 matches
Mail list logo