I'm setting up a configuration to use my CNC router as a 3D printer. I'd
like to be able to use custom M-codes to set the temperature of the extruder
and the heated build platforms. Is there a way, like
motion.spindle.at-speed, that I can make the gcode automatically pause
until the temperatures
I have a need to read dc current
36 volts up to 100 amps reasonably accurate
I am looking at Tamura L03S100D15 with Arduino
I am sure y'all have other suggestions hopefully cheaper
Richard
--
Everyone hates slow
I need to convert my mill to LinuxCNC and plan to use Mesa boards, that’s what
I used in my lathe conversion and am happy with it.
Any recommendations on a PC that plays well with LinuxCNC and Mesa boards?
Most of the ones I saw listed are no longer available from Newegg.
Thanks
Roger Neal
On 17 March 2013 08:31, Frank Tkalcevic fr...@franksworkshop.com.au wrote:
Is there a way, like
motion.spindle.at-speed, that I can make the gcode automatically pause
until the temperatures are ready? (my user component already returns a
ready signal, so I just need to hook it into linuxcnc
On Sun, 17 Mar 2013, RogerN wrote:
Date: Sun, 17 Mar 2013 05:11:49 -0500
From: RogerN re...@wildblue.net
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net Emc-users@lists.sourceforge.net
Subject: [Emc-users] PC for LinuxCNC with
kqt4a...@gmail.com wrote:
I have a need to read dc current
36 volts up to 100 amps reasonably accurate
I am looking at Tamura L03S100D15 with Arduino
I am sure y'all have other suggestions hopefully cheaper
I used some similar tamura Hall current sensors in a project
some years ago. You
On Mar 17, 2013, at 1:18 PM, Peter C. Wallace p...@mesanet.com wrote:
Other than EPP issues with with the 7I43 and some PCI parallel cards, I dont
think there are any serious compatibility issues with PC --Mesa hardware.
The real trick is finding current MBs with decent latency. (and that
On Sun, 17 Mar 2013, Tom Easterday wrote:
Date: Sun, 17 Mar 2013 15:15:43 -0400
From: Tom Easterday tom-...@bgp.nu
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Mar 17, 2013, at 3:30 PM, Peter C. Wallace p...@mesanet.com wrote:
On Sun, 17 Mar 2013, Tom Easterday wrote:
Date: Sun, 17 Mar 2013 15:15:43 -0400
From: Tom Easterday tom-...@bgp.nu
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine
On Sun, 17 Mar 2013, Jon Elson wrote:
kqt4a...@gmail.com wrote:
I have a need to read dc current
36 volts up to 100 amps reasonably accurate
I am looking at Tamura L03S100D15 with Arduino
I am sure y'all have other suggestions hopefully cheaper
I used some similar tamura Hall current
On Sun, 17 Mar 2013, Tom Easterday wrote:
Date: Sun, 17 Mar 2013 15:41:21 -0400
From: Tom Easterday tom-...@bgp.nu
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Sun, Mar 17, 2013 at 3:49 PM, Richard Ray kqt4a...@gmail.com wrote:
On Sun, 17 Mar 2013, Jon Elson wrote:
Beware of getting magnets near the sensor, it will be affected
even by the earth's magnetic field, so if you pick up the
equipment and move it, the zero will shift.
So does that
Hi,
I'm going to use LinuxCNC to control an art installation which is
basically a four axis CNC machine.
I'm going to get me a MESA card, a 5i25 should be sufficient. I never
used one of these, but I don't expect any serious problems.
What bothers me more is where to get suitable motors and
On 17 March 2013 20:44, Florian Rist fr...@fs.tum.de wrote:
I'm going to get me a MESA card, a 5i25 should be sufficient. I never
used one of these, but I don't expect any serious problems.
If you want to run small brushless motors then 5i23 might be better,
then you can use the 7i39 drive.
(2
2013/3/17 andy pugh bodge...@gmail.com
On 17 March 2013 20:44, Florian Rist fr...@fs.tum.de wrote: I need a
small motor, about 50 mm in diameter, that can deliver a quite
high torque of about 2.5N/m, but it dose not have to run fast, 100 rpm
would be more than sufficient. So I guess I'll
Richard Ray wrote:
On Sun, 17 Mar 2013, Jon Elson wrote:
kqt4a...@gmail.com wrote:
I have a need to read dc current
36 volts up to 100 amps reasonably accurate
I am looking at Tamura L03S100D15 with Arduino
I am sure y'all have other suggestions hopefully cheaper
I used
now I would try one of these:
http://www.pollin.de/shop/p/OTk3OTg4/Motoren/DC_Getriebemotoren.html
currently I use this one:
http://www.neuhold-elektronik.at/catshop/product_info.php?cPath=96_97products_id=3893
I've build a comparator board which fit the diameter of this motor.
my mill for
You will not be likely to get 100A through a 1mm conductor. The best
solution in this case is a current transformer with a rectifier circuit
if it is AC and an Arduino. I am busy with just such a project for my
plasma machine. Remember to put a very low ohmage resistor across the
transformer
18 matches
Mail list logo