Re: [Emc-users] Problem Connecting LCNC to G540 from PCIE Port

2015-10-09 Thread Willy Snow
Thanks Andy. >You could try "cat /proc/ioports" though I suspect it will give the same answer as you already have. bill@CNC:~$ cat /proc/ioports -0cf7 : PCI Bus :00 -001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0064-0064 : keyboar

Re: [Emc-users] Problem Connecting LCNC to G540 from PCIE Port

2015-10-09 Thread andy pugh
On 9 October 2015 at 19:54, Willy Snow wrote: > *lspci -vvv* > > 04:00.0 Parallel controller: NetMos Technology Device 9900 (prog-if 03 > [IEEE1284]) > Subsystem: Device a000:2000 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- >

[Emc-users] Problem Connecting LCNC to G540 from PCIE Port

2015-10-09 Thread Willy Snow
Hi All, First, I am pretty new to all of everything. I am hoping someone can point me back in the right direction. I am trying to get my bench setup running. I have a single nema 17 motor connected to a Gecko G540 using a 24V PS. I can power up the G540 with the charge pump off and the motor hold

Re: [Emc-users] Machine vision cameras for use with camview, align and friends

2015-10-09 Thread Greg Bernard
 Very nice work, Gene. I see some Greene & Greene influence in your design whose work I'm very fond of.Your kids will have an heirloom to be proud of for generations. +++ "Anyone who believes exponential growth can go on

[Emc-users] Program prefix

2015-10-09 Thread Eric H. Johnson
HI all, Has there been a change to PROGRAM_PREFIX in version 2.6 or later, currently using 2.7. Under 2.5, if I issue the 'open' command from linuxcncrsh it would pull the file from the path specified by PROGRAM_PREFIX in the DISPLAY section. Now it seems whatever I put in for that parameter,

Re: [Emc-users] AC Servo Motors, Cogging

2015-10-09 Thread Kirk Wallace
On 10/08/2015 01:18 AM, Marshland Engineering wrote: > Apparently DC Brushless cog but not AC ? > Anyway I'm about to order a 6N.m 1.8KW AC motor and drive for $340. It's > worth a try. > > Brushes ?? My South Western Industries mill has run 20+ hours a week for + 10 > years and I have never chang

Re: [Emc-users] Machine vision cameras for use with camview, align and friends

2015-10-09 Thread Gene Heskett
On Friday 09 October 2015 11:12:13 Viesturs Lācis wrote: > 2015-10-09 16:50 GMT+03:00 Jim Craig : > > Very nice! I like the Joinery. > > Oh yes, that chest looks really awesome, Gene! Corner joints are > beautiful! > > Viesturs > I do thumbhole gunstocks for myself too. But I don't advertise as th

Re: [Emc-users] Machine vision cameras for use with camview, align and friends

2015-10-09 Thread Gene Heskett
On Friday 09 October 2015 09:50:36 Jim Craig wrote: > On 10/9/2015 8:30 AM, Gene Heskett wrote: > > On Thursday 08 October 2015 16:04:42 Jim Craig wrote: > >> Gene, > >> > >> How about a pic of one of those blanket chests? > >> > >> Jim > > > > I did, but the server is holding it for the moderator

Re: [Emc-users] Machine vision cameras for use with camview, align and friends

2015-10-09 Thread Viesturs Lācis
2015-10-09 16:50 GMT+03:00 Jim Craig : > Very nice! I like the Joinery. Oh yes, that chest looks really awesome, Gene! Corner joints are beautiful! Viesturs -- ___ Emc-users ma

Re: [Emc-users] Machine vision cameras for use with camview, align and friends

2015-10-09 Thread Jim Craig
On 10/9/2015 8:30 AM, Gene Heskett wrote: > On Thursday 08 October 2015 16:04:42 Jim Craig wrote: > >> >> Gene, >> >> How about a pic of one of those blanket chests? >> >> Jim > I did, but the server is holding it for the moderator to clear as its not > quite 20k over the 360k size limit allowed.