Recommendation for punch Down tool for these amphenol connectors? Or a
solder cup style??
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
On Monday 06 August 2018 05:18:31 andy pugh wrote:
> On 6 August 2018 at 03:36, Gene Heskett wrote:
> > Tool paths (corrected) are I assume to be the nearest of the 8
> > positions, or are those actually calculated from data in the tool
> > table (and fussed about if obviously wrong I hope.
>
>
> -Original Message-
> From: Gene Heskett [mailto:ghesk...@shentel.net]
> Sent: Sunday, August 05, 2018 11:06 PM
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Cutter compensation with mill turning
>
> On Sunday 05 August 2018 22:39:18 Ken Strauss wrote:
>
> > >
On 6 August 2018 at 03:36, Gene Heskett wrote:
> Tool paths (corrected) are I assume to be the nearest of the 8 positions,
> or are those actually calculated from data in the tool table (and fussed
> about if obviously wrong I hope.
Tool radius correction is based entirely on the stated tool
On 6 August 2018 at 03:44, Gene Heskett wrote:
>> And I have a Pi running a realtime kernel.
>
> How did you install it to the sd card? Thats been a showstopper for me.
I compiled on the Pi.
> What type machine are you driving, lathe or mill?
Nothing, this was purely an exercise in seeing