> >
> > Now just to change the 5 Volt PWM into 0V to 10V analogue.
> >
> Thats a mesa spinx1.
> >
>
> Cheers, Gene Heskett
> --
That's more than $100Cdn with exchange rate and shipping compared to a few
dollars and some protoboard. But, in case you missed some of my other postings
under this s
On Friday 23 August 2019 20:20:22 John Dammeyer wrote:
> Well that turned out to be easier than I thought except for the
> spindle direction signal.
>
> Here's what's in the HAL
> # PWM gen signals/setup
> setp hm2_7i92.0.pwmgen.00.scale [SPINDLE_9]PWM_SCALE
> setp hm2_7i92.0.pwmgen.00.output
On Friday 23 August 2019 19:10:42 John Dammeyer wrote:
> Progress report on the WIN-XP/MACH3 to LinuxCNC/7i92H conversion:
>
> With six steppers declared:
> loadrt hm2_eth board_ip="192.168.1.121" config=" num_encoders=0
> num_pwmgens=0 num_stepgens=6"
>
> I have control of X,Y,Z and the rotary A.
Well that turned out to be easier than I thought except for the spindle
direction signal.
Here's what's in the HAL
# PWM gen signals/setup
setp hm2_7i92.0.pwmgen.00.scale [SPINDLE_9]PWM_SCALE
setp hm2_7i92.0.pwmgen.00.output-type 1
net spindle-enable => hm2_7i92.0.pwmgen.00.enabl
Progress report on the WIN-XP/MACH3 to LinuxCNC/7i92H conversion:
With six steppers declared:
loadrt hm2_eth board_ip="192.168.1.121" config=" num_encoders=0 num_pwmgens=0
num_stepgens=6"
I have control of X,Y,Z and the rotary A. Additionally a step motor instance
is used as the charge pump on
Be aware it's not really an Electronic Lead Screw as that term describes
something with more versatility and capablities. That product described in the
video is more like electronic gearing.
John
> -Original Message-
> From: a k [mailto:pccncmach...@gmail.com]
> Sent: August-23-19 1:27
On 8/23/19 3:26 PM, a k wrote:
this is good to implement for any lathe
https://youtu.be/FTs9GygRQ-U
lcnc + this control can be good idea
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
this is good to implement for any lathe
https://youtu.be/FTs9GygRQ-U
lcnc + this control can be good idea
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
On Friday 23 August 2019 14:08:55 Chris Albertson wrote:
> On Thu, Aug 22, 2019 at 7:10 PM Gene Heskett
wrote:
> > On Thursday 22 August 2019 16:35:42 Ralph Stirling wrote:
> > > Welcome back, Gene! Hope you stick around for a good long time.
> > >
> > > -- Ralph
> >
> > Thanks Ralph. I appreci
On Thu, Aug 22, 2019 at 7:10 PM Gene Heskett wrote:
> On Thursday 22 August 2019 16:35:42 Ralph Stirling wrote:
>
> > Welcome back, Gene! Hope you stick around for a good long time.
> >
> > -- Ralph
>
> Thanks Ralph. I appreciate the kind thoughts.
> >
> > On Aug 22, 2019 12:03 PM, Gene Heskett
10 matches
Mail list logo