hey guys just seeing if anyone has the bit file for a 5i25-7i77-7i84 mesa
cards
I am about to retrofit a 5ton slant bed cnc lathe with that and need a bit
file to use
also I have never actually flashed a mesa card with a bit file so would
appreciate a quick run down of the process or any
Orient the part to zero using translation routines.
On Tue, Sep 22, 2020, 11:45 PM TJoseph Powderly wrote:
> Stop labelling messages as SPAM
> HTH can we have topics labelled SPAM this and SPAM that?
> Stop replying to threads SPAM* !
> Who is playing Judge or God here fingering witches?
> STOP
Stop labelling messages as SPAM
HTH can we have topics labelled SPAM this and SPAM that?
Stop replying to threads SPAM* !
Who is playing Judge or God here fingering witches?
STOP
The topics and labels on this list are already _barely_ connected to OP.
tomp
On Tue, Sep 22, 2020 at 11:10 PM Chris
well, I got a lot of good information from this list, also where I was
"rebuilding" the mill and lathe.
(Phill Carter helped my out A LOT)
There are a bunch of utilities out on the web, that let's you drill
holes in patterns, make pockets in certain sizes/shapes etc.
Wonder if there is
On Tuesday 22 September 2020 15:17:21 R C wrote:
> Hi Chris,
>
>
> well, basically I just want to learn how to use them, by making some
> things I actually have a use for. For now on the lathe, I am trying to
> make a little shaft for a project.
>
> Why use CNC? well, because I want to learnhow
Yes I already turned them down.
Currently running max velocity at 8m/min and 750mm/sec2 I think.
Which is way slower than it used to run.
On Wed, Sep 23, 2020, 5:50 AM N wrote:
> There are limits in trajectory planner adjustable in .ini file
> DEFAULT_ACCELERATION= and MAX_ACCELERATION= you
On Tue, 22 Sep 2020 at 20:57, Chris Albertson wrote:
>
> If learning is the goal. I think the route is to first hand-code the
> g-code files.
This is potentially very easy with G72. You just need to create the
outer profile with G1, G2, G3 commands and the canned cycle does the
rest.
--
atp
If learning is the goal. I think the route is to first hand-code the
g-code files. Then if you want to learn how to connect CAD models to
g-code you have no option but to get a CAD system that has native CAM for
lathes.Fusion360, Solidworks, and Inventor are options but OnShape and
FreeCAD
Hi Chris,
well, basically I just want to learn how to use them, by making some
things I actually have a use for. For now on the lathe, I am trying to
make a little shaft for a project.
Why use CNC? well, because I want to learnhow to use, do lathe work,
using CNC.
Well, I do/did build
There are limits in trajectory planner adjustable in .ini file
DEFAULT_ACCELERATION= and MAX_ACCELERATION= you tried them?
> Hi again,
> Indeed it is pretty hard to use spindle load if is doesn't change thru
> the corner. I suspect it does on smaller machines but that is not a
> generalized
I have recently been using rest machining to speed up some parts.
One part I was working on, the first article came off at just over 5 hours
run time. It had a lot of corers with 0.03" radius, so very small cutters
were needed.
Moving to larger cutters in the beginning for bulk material removal,
What are you doing with the Lathe that you need CNC? The answer to this
will determine what software you need.
As soon as you get into operations that are synchronized to the spindle
rotation, like threading you are in need of specialized lathe-specif CAM
software.On the other hand, if you
Andy,
Are you confusing Inventor with Solidworks? Inventor is Autodesk's
flagship CAD system and does use HSMworks for CAM. Then later the older
version of HSM is moved over to Fusion 360.
Inventor is Autodesk's competitor to DS Solidworks.
They both seem to have two CAD products high and
On Tue, 22 Sep 2020 at 17:43, Roland Jollivet wrote:
>
> The problem with all the lower end CAM's is that they don't support Rest
> machining,
Fusion CAM claims to, but I am frequently unconvinced by the results.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed
I believe Solidworks either purchased or partnered with CamWorks to create
Solidworks CAM.
> On Sep 22, 2020, at 11:40 AM, Thaddeus Waldner wrote:
>
> HSMWorks started out as an add-on to Solidworks and Autodesk Inventor.
> Autodesk purchased the company and integrated it into their Fusion
The problem with all the lower end CAM's is that they don't support Rest
machining, which makes them fairly useless if you're machining steel.
DeskProto didn't either as far as I remember. Now it does, but don't know
how good it is.
Roland
On Tue, 22 Sep 2020 at 13:59, andy pugh wrote:
>
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: Tuesday, September 22, 2020 12:29 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Linux CAM.
>
> On Tue, 22 Sep 2020 at 17:23, Chris Albertson
> wrote:
>
> > I found this some years ago when I
HSMWorks started out as an add-on to Solidworks and Autodesk Inventor. Autodesk
purchased the company and integrated it into their Fusion 360, while at the
same time continued to sell it as a Solidworks add-on.
Solidworks CAM is their (Dassault Group) own product.
> On Sep 22, 2020, at 11:29
On Tue, 22 Sep 2020 at 17:23, Chris Albertson wrote:
> I found this some years ago when I was looking around. Then found
> Fusion360. It was obviously better. Now it appears Solidworks is going
> to take its place.
Both Fusion and Solidworks CAM seems to be basically HSMWorks.
--
atp
"A
THey offer several versions starting with a free version and going up to a
multi-axis version that can fo 5-axis indexed milling. They price
different from hobby and commercial use. The top-end hobby price is $250.
But you get the most bast version free.
The big limitation with this is they
>Just spotted in a forum post:
>https://www.youtube.com/watch?v=vLcOeH1CTMQ
>DeskProto now has a Linux version.
>I have never used it, and I have no idea what the costs for the
>paid-for versions are.
>But it does appear to be a conventional application that won't
>suddenly stop working on
I think the bottom line with FreeCAD is that is working fine if you need to
make one part and 3D print it. But it is not quite ready for complex
machine design or making parts with subtractive machine tools (lathes and
mills) But it covers maybe 90% of hobbyist use cases. This email list
The old Lincoln tombstone type welders - not the last 20 year units sold
in big box stores, but the old industrial style transformer welders were
good. The old tombstone welders had a crank on the front to set the amps.
They look old, and they are, so they don't sell well. They were dark
I've always struggled with locating the stock and the part within it, every
time I've set up tool paths in Freecad. (granted I've only done this less than
a half dozen times.) But after enough fiddling I have always managed to get
the origin and the part where I wanted them. I am pretty sure
Just spotted in a forum post:
https://www.youtube.com/watch?v=vLcOeH1CTMQ
DeskProto now has a Linux version.
I have never used it, and I have no idea what the costs for the
paid-for versions are.
But it does appear to be a conventional application that won't
suddenly stop working on the whim of
On Tuesday 22 September 2020 02:30:21 dave engvall wrote:
> Hi again,
> Indeed it is pretty hard to use spindle load if is doesn't change thru
> the corner. I suspect it does on smaller machines but that is not a
> generalized solution.
> Just for experimental purposes it might be interesting to
On Tuesday 22 September 2020 01:39:49 Frank Tkalcevic wrote:
> I was impressed that FreeCAD could import lots of different CAD
> formats. I tried to use the CAM (Path) on an old STEP file, but I
> couldn't work out how to orient my part, and set the origin to the
> bottom-left top corner of the
Hi again,
Indeed it is pretty hard to use spindle load if is doesn't change thru
the corner. I suspect it does on smaller machines but that is not a
generalized solution.
Just for experimental purposes it might be interesting to decrease the
velocity thru a corner see if it helps. Lacking the
28 matches
Mail list logo