One of the relies by Todd Zeurcher on the forum
https://forum.linuxcnc.org/27-driver-boards/33646-mesa-7i76-invert-input-pin
states to invert the input
hm2_5i25.0.7i76.0.0.input-00-not
I'm using the 7i92 and my inputs are referred to in this way.
net toolsense-in <= hm2_7i92.0.gpio.030.in
On 12/10/22 04:48, andy pugh wrote:
On Sun, 12 Dec 2021 at 11:12, Gene Heskett wrote:
I need access to the Z position that is G53 referenced as I need the
absolute
position on the post assuming the home switch abut 40 thou below the top
is at 0.0.
"Matrixkins" was just added to Master,
On Sun, 12 Dec 2021 at 11:12, Gene Heskett wrote:
>
> I need access to the Z position that is G53 referenced as I need the
> absolute
> position on the post assuming the home switch abut 40 thou below the top
> is at 0.0.
"Matrixkins" was just added to Master, this allows you to correct th
