___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
ME MS Eugenio Yime Rodriguez
phD Robotics and Automation
Universidad Tecnologica de Bolivar
Campus Tecnologico Carlos Velez Pombo
Cartagena de Indias
Start Board
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX53QSB
- QNX OS and BSP
http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/FreescaleImx53Qst
Thanks in advance,
Eugenio
--
Eugenio Yime Rodriguez
phD Robotics and Automation
2012/6/27 andy pugh bodge...@gmail.com
On 27 June 2012 13:41, Eugenio Yime Rodriguez eugenio.y...@gmail.com
wrote:
* Is possible to use LinuxCNC with QNX ?.
Anything is possible, but some things are more work than is worthwhile.
What is the reason not to use the existing, supported
at 07:55 -0700, Peter C. Wallace wrote:
On Sat, 12 May 2012, Eugenio Yime Rodriguez wrote:
Date: Sat, 12 May 2012 08:58:57 -0500
From: Eugenio Yime Rodriguez eugenio.y...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users
Hi Everybody,
I'm new to LinuxCNC and HAL, so before configuring AXIS I wanted to test my
new card 5i25+7i77 with analog output.
For that in mind, I did the following steps,
halrun
halcmd: loadrt trivkins
halcmd: loadrt motmod servo_period_nsec=100 num_joints=6
halcmd: loadrt hostmot2
