> rc-82d.
>
>
> >>What brand and number is your silicone and casting resin?
>
> Best results with Innovative Polymers RC-82D, also used IE-3075.
>
> I am using a dp-400 with 1:1 400ml cartridges and 3/8 static mix tubes.
>
>
>
> On Fri, Sep 27, 2013 at 1:42 PM,
I have made tons of molds and castings, ... literately.
Aluminum isn't a good choice especially with complicated parts. It doesn't
flex to release the molds. Typically with aluminum, it's automated and it
pushes the parts out with pins.
Exactly what do you hope to achieve in your fine process?
Wh
want to use is a big factor when dealing with the heat.
Don't expect high cutting speeds and rapids (my current rapid is set to
240mm/m), but the steppers do remain cool no matter how long you run them.
http://www.youtube.com/watch?v=aebIQRvZT3Q
Kenny
On Wed, Mar 10, 2010 at 9:27 PM, Chris Rey
I was inspired by Rainer to move from hal_joystick to hal_input.
I didn't use the joyhandle component specified in the wiki, and used a
config similar to the Remote_Pendant config in the wiki.
Kenny
On Sat, May 2, 2009 at 10:51 AM, Kenny wrote:
> Perhaps your using the hal_input c
ence the use of hal_joystick.
Kenny
On Fri, May 1, 2009 at 6:37 PM, Rainer Schmidt wrote:
> On Thu, Apr 23, 2009 at 6:31 AM, Kenny wrote:
> > Hi,
> > I just upgraded from emc2.2.8 to emc2.3 and it will not startup with my
> > Logitech Joypad configuration.
>
>
> I just
Thanks.
Kenny
On Thu, Apr 23, 2009 at 2:47 PM, Jeff Epler wrote:
> On Thu, Apr 23, 2009 at 01:31:13PM +0300, Kenny wrote:
> > Hi,
> > I just upgraded from emc2.2.8 to emc2.3 and it will not startup with my
> > Logitech Joypad configuration.
> >
> > HAL: ERRO
the output of ps-ef | grep hal.
ke...@kenny-emc2:~/emc2/configs/my-mill$ ps -ef |grep hal
111 4269 1 0 11:49 ?00:00:00 /usr/sbin/hald
root 4334 4269 0 11:49 ?00:00:00 hald-runner
root 4356 4334 0 11:49 ?00:00:00 hald-addon-input: Listening
on /dev
There is also pcb-gcode which is a plugin for eagle.
Kenny
On Fri, Oct 17, 2008 at 6:48 PM, Ormund Williams <[EMAIL PROTECTED]> wrote:
> On Fri, 2008-10-17 at 09:07 -0400, [EMAIL PROTECTED] wrote:
> > My primary project, aside from machining small prototype parts out of
>
How much does it cost?
On Thu, Jun 26, 2008 at 11:46 AM, Kirk Wallace <[EMAIL PROTECTED]>
wrote:
> I forwarded this in case it didn't come through directly.
>
> --
> Kirk Wallace (California, USA
> http://www.wallacecompany.com/machine_shop/
> Hardinge HNC/EMC CNC lathe,
> Bridgeport mill convers
Some videos on Youtube:
http://www.youtube.com/watch?v=JA_osyWIEFY
On Tue, May 20, 2008 at 3:42 PM, Mark Wendt (Contractor) <
[EMAIL PROTECTED]> wrote:
> At 08:32 AM 5/20/2008, you wrote:
>
>
> 2008/5/20 Mark Wendt (Contractor) <[EMAIL PROTECTED] >:
> At 07:04 AM 5/20/2008, you wrote:
>
> 200
10 matches
Mail list logo
