On 2/26/2012 12:01 AM, Walt wrote:
> On the remote chance that this is unknown, I share this.
>
> I see a steady supply of ink jet printers--cost = $1.29--at my local
> thrift stores (e.g. Goodwill) that have encoder assemblies with discs on
> the order of 2 and 3 inches diameter and 180 lines per
Stuart, Kent, Brian, Kim.
Thank you for the advice and comments. CabinetPartsPro has the following
processors
wincnc
techno
syntec
shopbot
multicampost atc
multicampost
mach3
gorilla
gorilla atc
fox48
fox48 drill
deskcnc
camaster
AXYZ_MC
AXYZ
Rgds
Neil
Hi everyone,
I have recently installed Cabinet Parts Pro in an effort to use my CNC
router (Joes 4 x 4) to cut out a small kitchen. The software doesn't have
EMC2 listed as a post processor but has many other options. Has anyone ever
used this application successfully with EMC2? if so, id appreciat
OK, I've done a few more tests with decidedly unexpected results. It
seems like my problem is definitely not video or USB related. I had
to move the machine to a different location, and don't have a long
enough wire to connect it to the network so I connected a monitor and
USB keyboard a
PROTECTED] [mailto:emc-users-
> [EMAIL PROTECTED] On Behalf Of Patrick Rogers
> Sent: Friday, January 18, 2008 1:30 PM
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Is it possible to disable video to fix latency
> issues
>
> Hi,
>
> I've installed
Hi,
I've installed EMC 2.2.1 onto an old PC from the BDI CD. The system
works fairly well even though it is low on RAM and slightly under
powered. When I run the RTAI Latency test however I get overruns,
and EMC itself refuses to run because of real time errors.
After reading some of the
