You might want to check out Vismach too. Gremlin and Vismach use the
same OpenGL methods. I'll keep a look out for any info I have on my end
that may add to the conversation.
On 08/27/2017 12:53 AM, 王若溪 wrote:
Thanks a lot, your insight into code really provides some useful info, such
as the
Thanks a lot, your insight into code really provides some useful info, such
as the pivot point of rotation in the back plot is hardcoded to (0,0,0).
I'm gonna try adding fake axes V and W in my machine config and set
GEOMETRY = VWAXYZ, apply an offset to V and W axes and see what happens.
As for
In case it might be handy:
http://www.wallacecompany.com/machine_shop/LinuxCNC/fourth_axis/
My next task was to try to clearly define what the plot should look
like. A working example to copy would be nice.
On 08/25/2017 12:53 AM, 王若溪 wrote:
Hi forks,
I'm using LinuxCNC with my 4 axes (A
Hi forks,
I'm using LinuxCNC with my 4 axes (A axis rotate along X axis) mill and I
want to make back plot in Axis GUI reflect the path of tool reference point
(tool tip) relative to the workpiece correctly.
i.e. The tool reference point (tool tip) should rotate about the A axis
hinge point,
