On 8 December 2014 at 04:53, linden l...@island.net wrote:
all I get is the flash screen and if I am lucky the tool chaing window
for a 5 seconds.
Is that _all_ you get, or is there an error description window?
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
On 12/7/14 9:53 PM, linden wrote:
I am trying to set up axis sim for 4 axis to test code for a rotary 4th
axis A (around X axis) on a knee mill. I tried taking the 9axis sim and
removing the extra axies but as soon as I do when I go to start the sim
all I get is the flash screen and if I am
Yes just the flash screen no error is there some where to turn on debug
or see error logs maybe I can see how far it is getting before it gets
stuck or why it seems to quit after the flash screen flashes.
On 14-12-08 07:50 PM, andy pugh wrote:
On 8 December 2014 at 04:53, linden
On 8 December 2014 at 23:27, linden l...@island.net wrote:
Yes just the flash screen no error
That's rather unusual.
dmesg might give some clue, but I wouldn't bet on it.
Try starting LinuxCNC from the terminal (just open a terminal and type
linuxcnc, you might get a bit more output.
--
atp
On 12/08/2014 04:04 PM, andy pugh wrote:
On 8 December 2014 at 23:27, linden l...@island.net wrote:
Yes just the flash screen no error
That's rather unusual.
dmesg might give some clue, but I wouldn't bet on it.
Try starting LinuxCNC from the terminal (just open a terminal and type
Im playing with this now and slowly making progress running from
terminal gives me some hints and it is dumping debug and warning text in
my home folder with some trial and error i should get this figured
thanks for your help ill let you know how it goes
linden
On 14-12-09 09:15 AM, Kirk
Hello all,
I am trying to set up axis sim for 4 axis to test code for a rotary 4th
axis A (around X axis) on a knee mill. I tried taking the 9axis sim and
removing the extra axies but as soon as I do when I go to start the sim
all I get is the flash screen and if I am lucky the tool chaing