; From: Leonardo Marsaglia
> > > Reply-To: "Enhanced Machine Controller (EMC)"
> > >
> > > To: "Enhanced Machine Controller (EMC)" <
> emc-users@lists.sourceforge.net
> > >
> > > Subject: [Emc-users] 7i72 max output current qu
e Controller (EMC)"
> >
> > To: "Enhanced Machine Controller (EMC)" >
> > Subject: [Emc-users] 7i72 max output current question
> >
> > Hi guys, I hope you're all doing great
> >
> > This could be probably for Peter but most of you wi
On Mon, 16 May 2022, Robin Szemeti via Emc-users wrote:
Date: Mon, 16 May 2022 01:52:37 +0100
From: Robin Szemeti via Emc-users
To: "Enhanced Machine Controller (EMC)"
Cc: Robin Szemeti
Subject: Re: [Emc-users] 7i72 max output current question
Personally, I would wire up som
300
> > From: Leonardo Marsaglia
> > Reply-To: "Enhanced Machine Controller (EMC)"
> >
> > To: "Enhanced Machine Controller (EMC)" >
> > Subject: [Emc-users] 7i72 max output current question
> >
> > Hi guys, I hope you're all
On Sun, 15 May 2022, Leonardo Marsaglia wrote:
Date: Sun, 15 May 2022 20:59:34 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] 7i72 max output current question
Hi guys, I h
Hi guys, I hope you're all doing great
This could be probably for Peter but most of you will know the answer so
here it goes.
I have to drive some 24 VCC pneumatic electrovalves and I would like to use
7i72's outputs directly. Each valve consumes 400 mA and the 7i72 max
current per output is 300