On 19 December 2016 at 21:18, hubert wrote:
> It looked interesting until I translated the model #. To me it looks
> like it is 512 counts per turn for 8 turns. No where near the implied
> 4096 counts for up to 4096 turns.
I think you are right.
Sorry chaps.
--
atp
"A motorcycle is a bicycle
It looked interesting until I translated the model #. To me it looks
like it is 512 counts per turn for 8 turns. No where near the implied
4096 counts for up to 4096 turns.
Hubert
On 12/19/16 11:30 AM, andy pugh wrote:
> These look like something of a bargain:
> http://www.ebay.com/itm/New-B
Indeed they do, if I could only find a need for them. Garage is full, already
quite much in the cellar and a barn quite full of stuff and maybe in a few
other places.
On Mon, 19 Dec 2016 17:30:30 +
andy pugh wrote:
> These look like something of a bargain:
> http://www.ebay.com/itm/New-B
These look like something of a bargain:
http://www.ebay.com/itm/New-BEI-Absolute-Multi-turn-Encoders-HMT25-Gray-Code-/261822092613?hash=item3cf5d01545:g:o~EAAOSw-7RVEBEQ
$100 each.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical
On Mon, 23 Feb 2009, Lars Levin wrote:
> Date: Mon, 23 Feb 2009 14:37:54 +0100
> From: Lars Levin
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Absolute encoders
>
> Hi Group!
>
>
Hi Group!
Is there any possibility for EMC to use absolute encoders, so instead of
homing at startup you load the actual
positions from the servodrives?
The drive documentation says:
"The NC-control system which is connected must have a SSI input and be
able to process SSI data in 25-bit format."
Gentlemen,
Just a thought on single axis multi motor homing. If the homing
sequence would inhibit the axis reaching the index until both have
reach index then homing would be as trivial as single axis single
motor.
thanks
Stuart
On Sat, Feb 7, 2009 at 4:45 AM, Lars Levin wrote:
> Hi all!
>
> I
Hi all!
I have been monitoring this list for several yoars and also been
planning my milling machine for too long,
but I do have an old milling machine converted and up and running with
EMC2 step/dir.
My new machine will require two motors on each axis, XXYYZZ A and B
This will be a 3 axis port
