From: Rudy du Preez r...@asmsa.co.za
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Analogue servo driving with Mesa 7i33
I have managed pretty well converting 3 machines to EMC2 - two
Thanks Peter. I am sorry, I maint PMD, not PID in my statements above.
I tried to calibrate running HAL, but the analogue output is being clipped
at 1 V. There is probably a setting such as MAX_OUTPUT that I have not set
yet. The OUTPUT_SCALE and OUTPUT_OFFSET settings in the .ini file is
I have managed pretty well converting 3 machines to EMC2 - two using the
parallel port and one using Mesa 5i20 and 7i29 cards. However, now I am
looking at using a 5i20+7i33 setup to drive analogue servo drivers that need
two inputs, AN+ and AN- 10V (and GND?). It is not clear to me how this is to
On Mon, 29 Mar 2010, Rudy du Preez wrote:
Date: Mon, 29 Mar 2010 09:22:41 +0200
From: Rudy du Preez r...@asmsa.co.za
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Analogue servo driving with Mesa
