Thanks for any help, I found out that the power supply is OK. I was just not getting a good connection between my multimeter probes and the PSupply. I tested at the drives and the voltage was good.
I put a new copy of my .ini and .hal file on pastebin. myPCBMill.ini <https://pastebin.com/1ReQZSUw <https://pastebin.com/1ReQZSUw>> myPCBMill.hal <https://pastebin.com/ke8YBWJ9 <https://pastebin.com/ke8YBWJ9>> I am having a horrible time getting this set up right. The 7i76e is an early one that Pete gave me to replace one that I burnt up plugging a 12v power supply into the 5V connector. Can somebody look at my .ini and .hal files and see if they spot anything obviously wrong. When I run pncconf I can’t get the motors to move. Here is a picture of the pncconf screen for the stepper setup using the 7i76e and a picture of the pncconf setup for myCNCLathe using the 5i25/7i76 comb. <https://photos.google.com/share/AF1QipPrjhcpGzZQxkSHlHvXpJcNfLrhuY4b7vEY2CSAjc5tByhbPCqwXFQwtX59IUJBEg?key=VF8xczh4ZGJ4akw0Y3p0TDc3U0g2M1BjR1FncWdB <https://photos.google.com/share/AF1QipPrjhcpGzZQxkSHlHvXpJcNfLrhuY4b7vEY2CSAjc5tByhbPCqwXFQwtX59IUJBEg?key=VF8xczh4ZGJ4akw0Y3p0TDc3U0g2M1BjR1FncWdB>> Any help appreciated. Thanks Alan, > From: Chris Albertson <albertson.ch...@gmail.com> > Subject: Re: [Emc-users] 7i76e with Rpi4 > Date: September 22, 2022 at 11:51:14 AM CDT > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > > > On Thu, Sep 22, 2022 at 9:44 AM Alan Condit <condit.a...@gmail.com> wrote: > >> I don’t seem to >> have any output voltage from my Meanwell SE-600-48 power supply. The fan >> was working so I assumed everything was fine, bad assumption on my end. Is >> it worth trying to repair, or should I just replace it? >> > > At the very least open it up and see if the internal fuse is blown. Yu > don't want to replace a power supply if am accidental short blew a fuse. > > -- > > Chris Albertson > Redondo Beach, California _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users