On 10/29/2014 11:52 AM, Kirk Wallace wrote:
> On 10/29/2014 09:36 AM, Jon Elson wrote:
>> On 10/29/2014 02:56 AM, Tomaz T. wrote:
>>> I found out that it was entirely hardware problem, because after moving
>>> parallel pci card to the other pci slot, it finally started to work.
>>>
>>>
>> Hmmm, ve
On 10/29/2014 09:36 AM, Jon Elson wrote:
> On 10/29/2014 02:56 AM, Tomaz T. wrote:
>> I found out that it was entirely hardware problem, because after moving
>> parallel pci card to the other pci slot, it finally started to work.
>>
>>
> Hmmm, very strange! Well, glad you got it to work!
>
> Jon
On 10/29/2014 02:56 AM, Tomaz T. wrote:
> I found out that it was entirely hardware problem, because after moving
> parallel pci card to the other pci slot, it finally started to work.
>
>
Hmmm, very strange! Well, glad you got it to work!
Jon
---
I found out that it was entirely hardware problem, because after moving
parallel pci card to the other pci slot, it finally started to work.
>
> A wild guess might be that the PPMC board is not powered up or not
> connected? There is a Pico diagnostic program you might try.
>
> http://pico-syste
On 10/28/2014 03:43 AM, Tomaz T. wrote:
> Anyone have ideas what could be wrong, and causing me this error on Lcnc
> startup:
>
> Debug file information:
> Can not find -sec APPLICATIONS -var DELAY -num 1
> insmod: error inserting
> '/usr/realtime-2.6.32-122-rtai/modules/linuxcnc/hal_ppmc.ko': -1
On 10/28/2014 01:43 AM, Tomaz T. wrote:
> Anyone have ideas what could be wrong, and causing me this error on Lcnc
> startup:
>
> Debug file information:
> Can not find -sec APPLICATIONS -var DELAY -num 1
> insmod: error inserting
> '/usr/realtime-2.6.32-122-rtai/modules/linuxcnc/hal_ppmc.ko': -1
On 28 October 2014 08:43, Tomaz T. wrote:
> See the output of 'dmesg' for more information.
What does dmesg say?
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
--
___
Anyone have ideas what could be wrong, and causing me this error on Lcnc
startup:
Debug file information:
Can not find -sec APPLICATIONS -var DELAY -num 1
insmod: error inserting
'/usr/realtime-2.6.32-122-rtai/modules/linuxcnc/hal_ppmc.ko': -1 Operation not
permitted
my5axis_load.hal:19: exit