On Friday 08 January 2016 21:57:26 andy pugh wrote:
> On 9 January 2016 at 02:48, Gene Heskett wrote:
> > Where are the best docs on GladeVCP? Surely there is more expansive
> > tut's available than what is in our Doc's.
>
> Yes, much of the generic Glade and GTK+ documentation online is
> relev
On 9 January 2016 at 02:48, Gene Heskett wrote:
> Where are the best docs on GladeVCP? Surely there is more expansive
> tut's available than what is in our Doc's.
Yes, much of the generic Glade and GTK+ documentation online is
relevant. Now you are the other side of the problem too _much_
docume
On Friday 08 January 2016 20:06:12 andy pugh wrote:
> On 9 January 2016 at 00:54, Gene Heskett wrote:
> > less transparent when trying to fix stuff than pyvcp. QTCTWG?
>
> "Quite Close To What You Get"
Thats a new acronym I'll have to remember. ;-)
Where are the best docs on GladeVCP? Surely t
On 9 January 2016 at 00:54, Gene Heskett wrote:
> less transparent when trying to fix stuff than pyvcp. QTCTWG?
"Quite Close To What You Get"
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
On Friday 08 January 2016 19:31:41 andy pugh wrote:
> On 9 January 2016 at 00:08, Gene Heskett wrote:
> > Since there no profit for you in bugging you, where can I find (url)
> > a good tutorial on writing pyvcp stuff in .xml?
>
> Nowhere but here. PyVCP is LinuxCNC only AFAIK.
> http://linuxcnc.
On 9 January 2016 at 00:08, Gene Heskett wrote:
> Since there no profit for you in bugging you, where can I find (url) a
> good tutorial on writing pyvcp stuff in .xml?
Nowhere but here. PyVCP is LinuxCNC only AFAIK.
http://linuxcnc.org/docs/2.7/html/gui/pyvcp.html
Any decent XML editor should
On Friday 08 January 2016 16:37:54 Mark Johnsen wrote:
> Looks like there is an out of place line in the manual code:
> 5
>
> http://imgur.com/NseTsjA
>
> At least my working code doesn't ahve that line. I should preface
> that I don't really program in python:-(
>
Neither do I. I think this old
On Friday 08 January 2016 12:16:04 Mark Johnsen wrote:
> Gene,
>
> Yes, there is an error in the manual code. I have to run (late
> actually), but I posted my xml file and postgui.hal file to pastebin
> and maybe you can compare? They do work... I don't have time to look
> for the error now, so
Looks like there is an out of place line in the manual code:
5
http://imgur.com/NseTsjA
At least my working code doesn't ahve that line. I should preface that I
don't really program in python:-(
The odd thing was that I recall the lights working _wonky_ until I messed
around with their on/off s
Gene,
Yes, there is an error in the manual code. I have to run (late actually),
but I posted my xml file and postgui.hal file to pastebin and maybe you can
compare? They do work... I don't have time to look for the error now,
sorry...
xml file
http://pastebin.com/FbyHnYEy
custom_postgui.hal
h
Greetings all
Does anyone have a working version of that file? I checked, recopied buy
cut/paste several times now and can't make it work.
I found a miss-matched - tag and I think I fixed that, but
now its fussing about:
gene@GO704:~/linuxcnc/configs/GO704fast$ linuxcnc -l
LINUXCNC - 2.8.0-pre1
11 matches
Mail list logo