@lists.sourceforge.net
Subject: [Emc-users] Help with 5i25 + 7i77
Hi Everybody,
I'm new to LinuxCNC and HAL, so before configuring AXIS I wanted to test my
new card 5i25+7i77 with analog output.
For that in mind, I did the following steps,
halrun
halcmd: loadrt trivkins
halcmd: loadrt
Hi Everybody,
I'm new to LinuxCNC and HAL, so before configuring AXIS I wanted to test my
new card 5i25+7i77 with analog output.
For that in mind, I did the following steps,
halrun
halcmd: loadrt trivkins
halcmd: loadrt motmod servo_period_nsec=100 num_joints=6
halcmd: loadrt hostmot2
Have you applied power to the field power? If not no I/O...
John
On 5/12/2012 8:58 AM, Eugenio Yime Rodriguez wrote:
Hi Everybody,
I'm new to LinuxCNC and HAL, so before configuring AXIS I wanted to test my
new card 5i25+7i77 with analog output.
For that in mind, I did the following
On Sat, 12 May 2012, Eugenio Yime Rodriguez wrote:
Date: Sat, 12 May 2012 08:58:57 -0500
From: Eugenio Yime Rodriguez eugenio.y...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] Help