On 05/02/2016 06:03 AM, Erik Friesen wrote:
> Perhaps there needs to be an easy to find migration page. Here is what it
> was..
The "Updating LinuxCNC" page I linked you to has the content you're
looking for, that's where we put all the upgrade/migration information.
I agree it can be harder
Perhaps there needs to be an easy to find migration page. Here is what it
was..
(Hardware = 5i25 and 7i76)
loadrt probe_parport isn't necessary, and won't load anyway, for whatever
reason
watchdog petting isn't needed anymore per google search.
Also, it is found in ~/linuxcnc, which isn't
On 2 May 2016 at 03:12, Sebastian Kuzminsky wrote:
> Does anyone want to try to salvage any of that wiki page before i remove it?
Is there anything there that is still true? I didn't see anything...
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
On 05/01/2016 02:55 PM, Erik Friesen wrote:
> So I installed/updated my router to 2.7.6 from a live cd, can't seem to
> find where the configs are located...
I don't understand this question.
You can select one of the sample configs when you run LinuxCNC from the
desktop menu.
The sample
On 1 May 2016 at 21:55, Erik Friesen wrote:
> So I installed/updated my router to 2.7.6 from a live cd,
That might have been a complete reformat and reinstall, if you used the LiveCD.
Unless you kept a copy of your configs somewhere, that might have been
a mistake.
There is no
On Sunday 01 May 2016 16:55:51 Erik Friesen wrote:
> So I installed/updated my router to 2.7.6 from a live cd, can't seem
> to find where the configs are located...
>
> http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Configuring_LinuxCNC is
> outdated.
>
That may be, but the configs haven't moved on my
So I installed/updated my router to 2.7.6 from a live cd, can't seem to
find where the configs are located...
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Configuring_LinuxCNC is outdated.
Also, any other issues I may face migrating from 2.6 ?