Sweet well that works great for now
On Sun, 12 Feb 2023, 04:56 Andy Pugh, wrote:
>
>
> > On 11 Feb 2023, at 00:28, andrew beck wrote:
> >
> > it looks like the wear offset is not
> > separated and i don't know to change x and not z
>
> Oh, yes. Thinking about it, it will.
> You might have
> On 11 Feb 2023, at 00:28, andrew beck wrote:
>
> it looks like the wear offset is not
> separated and i don't know to change x and not z
Oh, yes. Thinking about it, it will.
You might have to actually store half the value in the tool table.
There is probably a way to pick out the
awesome
i went and had a look and my brain hurts
this is the code in the toolchange sub remap
what would i need to change? it looks like the wear offset is not
separated and i don't know to change x and not z
if you can show me i will make a big post in the linuxcnc forum all about
setting
> On 10 Feb 2023, at 21:44, andrew beck wrote:
>
> And I trying to change the toolchange.ngc file?
Yes, that’s where the offset is applied.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
Haha might have known you wrote it Andy
I'll go get the script now to have a look at it
And I trying to change the toolchange.ngc file?
Or the python stuff?
One thing I need to do is make sure I half the X axis wear offset and don't
change the z axis wear offset
On Sat, 11 Feb 2023, 02:27
> On 10 Feb 2023, at 06:42, andrew beck wrote:
>
> Does anyone know who wrote the fanucy style wear offset remap?
I did it.
Note that I have never used a Fanuc machine.
>
> It would be good to change it to be in dia eg divide the wear
This should be a simple change in the remap NGC file.
Hey guys
Does anyone know who wrote the fanucy style wear offset remap?
I put it on my lathe and it is great.
Not perfect but much better than stock standard tool offsets.
There are two things I would like to change.
First the wear offset is in radius.
It would be good to change it to be in
