>
> One standard is A+ B- C- so I would suggest trying that.
> Tried that, no dice.
I believe these floating leads have something to do with it.
The mclr8 wire if touched will completely stop all function. Sometimes it's
smooth others it's not . Brand New encoder, factory assembled cable.
On 28 July 2018 at 20:20, jeremy youngs wrote:
> Also , cui says setting alignment will always align with u , so I presume
> the logic is standard, a,b,c is to u,v,w so I'm presuming that the a should
> be + and the b - for this alignment
One standard is A+ B- C- so I would suggest trying that.
Also , cui says setting alignment will always align with u , so I presume
the logic is standard, a,b,c is to u,v,w so I'm presuming that the a should
be + and the b - for this alignment , it's a 4 pole motor so it has 2
mechanical lock points 180 degrees apart , should it matter which one of
these
Kollmorgen eb 404
Does anyone know what phases to energize for locked rotor alignment of this
motor? I finally have my cui encoder and programming cables, I have aligned
with phase a + phase b- and set encoder. I can make it turn but it is rough
I don't think I have the right phase aligned. I have
