On 12 Jun 2014, at 15:49, Peter C. Wallace p...@mesanet.com wrote:
As far as I can see the watchdog should bite when linuxcnc is not running,
switching outputs to high impedance.
The drives are connected via 330R and an 6N137.
http://www.uhu-servo.de/UHU_PCB_3_13.pdf
There is no way they
Hi,
Today I converted a mill form parport to 5I25, using 5i25_r990x2.bit bitfile.
Everything was running good. Having a mesa card, I wanter to increase the speed.
When I closed linuxcnc, X and Y ran into the endstops at full speed.
Thinking of watchdog problems, I removed the pet function from the
On Thu, 12 Jun 2014, Rene Hopf wrote:
Date: Thu, 12 Jun 2014 12:31:22 +0200
From: Rene Hopf reneh...@mac.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] Mesa 5I25
