Controller (EMC)
emc-users@lists.sourceforge.net
To: 'Enhanced Machine Controller (EMC)'
emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Mixing BLDC and brushed motors
snip
Not sure if theres a standard bitfile for that but its easy
copy-paste a pinout up and make one
I have
Subject: Re: [Emc-users] Mixing BLDC and brushed motors
Greetings to anyone who compiles Mesa bitfiles
-Original Message-
From: Peter C. Wallace [mailto:p...@mesanet.com]
On Thu, 4 Sep 2014, John Prentice (FS) wrote:
Date: Thu, 4 Sep 2014 22:44:13 +0100
From: John Prentice (FS) j
Greetings
This is probably a question for PCW but others might know or have dome it.
I am looking at a small machine design where two axes will be BLDC motors
and one (or perhaps two) brushed DC.
The BLDC motors suit a 7i39 very well (interfaced by a 5i20). Are there any
problems in
On 4 September 2014 13:50, John Prentice (FS)
j...@castlewd.freeserve.co.uk wrote:
The BLDC motors suit a 7i39 very well (interfaced by a 5i20). Are there any
problems in using just two phases of another 7i39 to drive the brushed
motor? I presume that one would drive, say A, with the desired
Subject: [Emc-users] Mixing BLDC and brushed motors
Greetings
This is probably a question for PCW but others might know or have dome it.
I am looking at a small machine design where two axes will be BLDC motors
and one (or perhaps two) brushed DC.
The BLDC motors suit a 7i39 very well
Peter thank you
-Original Message-
From: Peter C. Wallace [mailto:p...@mesanet.com]
Yes you can look at the 7i39 as 6 individual 1/2 bridges and drive 3 DC
motors from one 7i39. if a brushed motor was connected to half bridges A and
B, I _think_ what is needed is to drive A with the PID
Subject: Re: [Emc-users] Mixing BLDC and brushed motors
Peter thank you
-Original Message-
From: Peter C. Wallace [mailto:p...@mesanet.com]
Yes you can look at the 7i39 as 6 individual 1/2 bridges and drive 3 DC
motors from one 7i39. if a brushed motor was connected to half bridges
