Re: [Emc-users] Panasonic serial encoder interface

5ext. 2031 > > -Original Message- > From: Ralph Stirling > Sent: Thursday, October 21, 2021 11:14 PM > To: emc-users@lists.sourceforge.net > Subject: [Emc-users] Panasonic serial encoder interface > > [EXTERNAL EMAIL] Be sure links are safe. > > We are diggi

Re: [Emc-users] Panasonic serial encoder interface

all stored info is gone. > > -- Ralph > > From: Todd Zuercher [to...@pgrahamdunn.com] > Sent: Friday, October 22, 2021 6:44 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Panasonic serial encoder interface > > Are you using the Panasonic servo drives

Re: [Emc-users] Panasonic serial encoder interface

et Subject: [Emc-users] Panasonic serial encoder interface [EXTERNAL EMAIL] Be sure links are safe. We are digging into a 2002-vintage Denso 6-axis robot, with a Linuxcnc conversion in mind. The joint motors on this robot appear to have Panasonic encoders with a four wire interface and a fair

[Emc-users] Panasonic serial encoder interface

I knew I had something on file... Try this

Re: [Emc-users] Panasonic serial encoder interface

] Panasonic serial encoder interface [EXTERNAL EMAIL] Be sure links are safe. We are digging into a 2002-vintage Denso 6-axis robot, with a Linuxcnc conversion in mind. The joint motors on this robot appear to have Panasonic encoders with a four wire interface and a fair amount of circuitry

[Emc-users] Panasonic serial encoder interface

We are digging into a 2002-vintage Denso 6-axis robot, with a Linuxcnc conversion in mind. The joint motors on this robot appear to have Panasonic encoders with a four wire interface and a fair amount of circuitry inside each encoder. I suspect that these are the same as the ones in this EEVblog