Hello to all.
I need to control a screw with an encoder mounted on it. Calculating the
max rpm and the resolution I want I need a 25 khz read response for the
encoder.
I remember reading somewhere the maximum expected frequency of the parport
software driver to read an input but I don't remember
On 09/30/2013 12:05 PM, Leonardo Marsaglia wrote:
Hello to all.
I need to control a screw with an encoder mounted on it. Calculating the
max rpm and the resolution I want I need a 25 khz read response for the
encoder.
I remember reading somewhere the maximum expected frequency of the
Hello Jon and thanks for the quick answer.
I was affraid that it would be on the limit. I guess I'm going to use a
5i20 to read it. I have one machine using it so I can test it with the TTL
encoder and see how it works.
Do you know if the 6i25 is already supported by LinuxCNC? I know that
On 09/30/2013 12:33 PM, Leonardo Marsaglia wrote:
Hello Jon and thanks for the quick answer.
I was affraid that it would be on the limit. I guess I'm going to use a
5i20 to read it. I have one machine using it so I can test it with the TTL
encoder and see how it works.
Do you know if the
Subject: Re: [Emc-users] Parport driver max expected frequency
Hello Jon and thanks for the quick answer.
I was affraid that it would be on the limit. I guess I'm going to use a
5i20 to read it. I have one machine using it so I can test it with the TTL
encoder and see how it works.
Do you
