On Tuesday, January 31, 2012 11:15:31 AM Chris Radek did opine:
On Tue, Jan 31, 2012 at 10:49:04AM -0500, gene heskett wrote:
show stopper. In doing a G38.2 f1 z2.5, it will probably stop well
within a thou of contact. But then I am dead in the water because
when I try to do a z move to
Could there be any connection with this to the M66 problem I have listed
herehttp://sourceforge.net/tracker/?func=detailatid=106744aid=3477158group_id=6744?
I think its an error in communication between the top and bottom levels.
If M66 is followed by an oname etc, the decoder sees this as two
On Tue, Jan 31, 2012 at 11:31:26AM -0500, gene heskett wrote:
the machine state, the usefulness of the probe has been fulfilled, so why
the heck should it care one way or the other when the machine tries to do a
g0 z[#5063 +0.02] in order to back off
I sympathize with you being frustrated
On Tue, 31 Jan 2012, gene heskett wrote:
Date: Tue, 31 Jan 2012 11:31:26 -0500
From: gene heskett ghesk...@wdtv.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Probing error?
On Tuesday
On Tuesday, January 31, 2012 06:57:39 PM Chris Radek did opine:
On Tue, Jan 31, 2012 at 11:31:26AM -0500, gene heskett wrote:
the machine state, the usefulness of the probe has been fulfilled, so
why the heck should it care one way or the other when the machine
tries to do a g0 z[#5063
@lists.sourceforge.net
Subject: Re: [Emc-users] Probing error?
On Tuesday, January 31, 2012 11:15:31 AM Chris Radek did opine:
On Tue, Jan 31, 2012 at 10:49:04AM -0500, gene heskett wrote:
show stopper. In doing a G38.2 f1 z2.5, it will probably stop well
within a thou of contact
On Tue, 31 Jan 2012 19:18:41 -0500
gene heskett ghesk...@wdtv.com wrote:
On Tuesday, January 31, 2012 06:57:39 PM Chris Radek did opine:
On Tue, Jan 31, 2012 at 11:31:26AM -0500, gene heskett wrote:
the machine state, the usefulness of the probe has been
fulfilled, so why the heck