On Fri, 24 Aug 2012, Viesturs L?cis wrote:
> Date: Fri, 24 Aug 2012 18:51:40 +0300
> From: "[UTF-8] Viesturs L?cis"
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users]
2012/8/24 Peter C. Wallace :
>> Thank You, got it!
>> It is the 7i37com that had it much easier to wire up inputs...
>>
>> --
>> Viesturs
>>
>> If you can't fix it, you don't own it.
>> http://www.ifixit.com/Manifesto
>
> Yes but if you need a contact to ground input or a sinking output the 7I37COM
> Thank You, got it!
> It is the 7i37com that had it much easier to wire up inputs...
>
> --
> Viesturs
>
> If you can't fix it, you don't own it.
> http://www.ifixit.com/Manifesto
Yes but if you need a contact to ground input or a sinking output the 7I37COM
cannot be used. The 7I737/TA are unive
2012/8/24 Peter C. Wallace :
> On Fri, 24 Aug 2012, Viesturs L?cis wrote:
>
>> Date: Fri, 24 Aug 2012 17:13:22 +0300
>> From: "[UTF-8] Viesturs L?cis"
>> Reply-To: "Enhanced Machine Controller (EMC)"
>>
>> To: "Enhanced Machine Co
On 08/24/2012 07:13 AM, Viesturs Lācis wrote:
> Hello!
>
> I looked at 7i37 manual, but did not find it explained:
> How am I supposed to connect input signal from source, whose ground is
> connected to 7i37 power supply ground? Is it sufficient to connect
> only the signal wire, or must I connect
On Fri, 24 Aug 2012, Viesturs L?cis wrote:
> Date: Fri, 24 Aug 2012 17:13:22 +0300
> From: "[UTF-8] Viesturs L?cis"
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] Quick ques
On Fri, Aug 24, 2012 at 10:13 AM, Viesturs Lācis
wrote:
> Hello!
>
> I looked at 7i37 manual, but did not find it explained:
> How am I supposed to connect input signal from source, whose ground is
> connected to 7i37 power supply ground? Is it sufficient to connect
> only the signal wire, or must
Hello!
I looked at 7i37 manual, but did not find it explained:
How am I supposed to connect input signal from source, whose ground is
connected to 7i37 power supply ground? Is it sufficient to connect
only the signal wire, or must I connect also GND? I could not find it
anywhere, if GND on optoiso