31
>
> -Original Message-
> From: Viesturs Lācis
> Sent: Tuesday, March 28, 2023 3:30 PM
> To: Enhanced Machine Controller (EMC)
> Subject: [Emc-users] Reusing Fanuc servo drive?
>
> [EXTERNAL EMAIL] Be sure links are safe.
>
> Hello!
>
> I am asked to r
On 3/28/23 15:31, Viesturs Lācis wrote:
Hello!
I am asked to retrofit some old 3 axis mill to LinuxCNC. It is not yet
clear if original servodrives are working or not, so the owner wants
to reuse Fanuc servodrives and motors they have removed from another
machine. This is label of the servodrive
her
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Viesturs Lācis
Sent: Tuesday, March 28, 2023 3:30 PM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] Reusing Fanuc servo drive?
[EXTERNAL EMAIL] Be sure links are
Hello!
I am asked to retrofit some old 3 axis mill to LinuxCNC. It is not yet
clear if original servodrives are working or not, so the owner wants
to reuse Fanuc servodrives and motors they have removed from another
machine. This is label of the servodrive:
https://pasteboard.co/LNVjuaBYC3Ox.jpg