Shabbir Hussain wrote:
> Dear All,
>
> I have set up a lathe machine with analog AC servos and Mesa 7i43 and 7i33.
> The following error is 0.017 mm at start (acceleration) and then reduced to
> 0.008 mm at 6000 mm/min. Everything is just fine except:
>
> When the machine is homed the axis moves t
can exceed its maximum
velocity.
> -Original Message-
> From: Sebastian Kuzminsky [mailto:s...@highlab.com]
> Sent: Wednesday, 14 March 2012 4:43 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Strange Sound from Motors when Home Latched
>
> On 03/13/
On 03/13/2012 09:53 PM, Shabbir Hussain wrote:
> I have set up a lathe machine with analog AC servos and Mesa 7i43 and 7i33.
> The following error is 0.017 mm at start (acceleration) and then reduced to
> 0.008 mm at 6000 mm/min. Everything is just fine except:
>
> When the machine is homed the ax
Dear All,
I have set up a lathe machine with analog AC servos and Mesa 7i43 and 7i33.
The following error is 0.017 mm at start (acceleration) and then reduced to
0.008 mm at 6000 mm/min. Everything is just fine except:
When the machine is homed the axis moves towards home switch, touches it and