On 5/10/20 5:39 PM, Peter C. Wallace wrote:
On Sun, 10 May 2020, Ed wrote:
Date: Sun, 10 May 2020 16:43:34 -0500
From: Ed
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Trouble setting up a 7I80HD
On 5/10/20 11:51 A
On 5/10/20 5:39 PM, Peter C. Wallace wrote:
On Sun, 10 May 2020, Ed wrote:
Date: Sun, 10 May 2020 16:43:34 -0500
From: Ed
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Trouble setting up a 7I80HD
On 5/10/20 11:51 A
On Sun, 10 May 2020, Ed wrote:
Date: Sun, 10 May 2020 16:43:34 -0500
From: Ed
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Trouble setting up a 7I80HD
On 5/10/20 11:51 AM, Peter C. Wallace wrote:
This likely mean
On Sun, 10 May 2020 at 22:46, Ed wrote:
> P1-1 through P1-47 do not correspond to the pin out of a 7i29
> P1-1 on the 7i29 is motor1 encb, P1-3 ismotor1 enca, etc.
>
> What file should I be editing and where could I find it?
If the pinout is wrong you need a different bitfile. The pin
On 5/10/20 11:51 AM, Peter C. Wallace wrote:
This likely means that you do not have the proper bitfile loaded.
Thats really should be the first step before any testing, make sure
the the pinout of the configuration matches you daughterboard setup. A
svst4_8 of svst8_4 configuration is a
On Sun, 10 May 2020, Ed wrote:
Date: Sun, 10 May 2020 11:32:47 -0500
From: Ed
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Trouble setting up a 7I80HD
On 5/9/20 1:43 PM, Peter C. Wallace wrote:
On Sat, 9 May 2020
On Sunday 10 May 2020 12:32:47 Ed wrote:
> On 5/9/20 1:43 PM, Peter C. Wallace wrote:
> > On Sat, 9 May 2020, Ed wrote:
> >> 2: eth0: mtu 1500 qdisc
> >> pfifo_fast
> >
> >
> >
> > you need to change your interfaces file to
On Sun, 10 May 2020 at 17:34, Ed wrote:
> Now the DRO would only read up and down one encoder count so I figured
> it was a setup problem.
More likely one of A or B is not working.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of
On 5/9/20 1:43 PM, Peter C. Wallace wrote:
On Sat, 9 May 2020, Ed wrote:
2: eth0: mtu 1500 qdisc pfifo_fast
you need to change your interfaces file to setup eth0 not eth1
Peter Wallace
Mesa Electronics
OK got that
On Sun, 10 May 2020 at 12:14, Mark wrote:
> Been using IPv6 for years now. We're running out of IPv4 address space
> so something has to be done.
I think that they have run out. Though my employer has 16777216
addresses available, which is probably enough.
(One of very few remaining private /8
On Sunday 10 May 2020 08:46:52 Luvtofish wrote:
> I use private ipv4 address space for all my devices. My internet
> router is the only item that uses/needs a unique public routable IP
> address. Everything else can / should use the 10 or 192 net space.
>
Precisely. And with a decent router
On Sunday 10 May 2020 07:10:25 Mark wrote:
> On 5/9/20 17:33, Gene Heskett wrote:
> > On Saturday 09 May 2020 16:51:48 Mark Wendt wrote:
> >> That's the default IPv6 address assigned to an unconfigured
> >> interface. As Peter pointed out, he needs to configure eth0, not
> >> eth1 which doesn't
I use private ipv4 address space for all my devices. My internet router is the
only item that uses/needs a unique public routable IP address. Everything else
can / should use the 10 or 192 net space.
Sent from my iPhone.
> On May 10, 2020, at 6:14 AM, Mark wrote:
>
> On 5/9/20 17:33, Gene
On 5/9/20 17:33, Gene Heskett wrote:
On Saturday 09 May 2020 16:51:48 Mark Wendt wrote:
That's the default IPv6 address assigned to an unconfigured interface.
As Peter pointed out, he needs to configure eth0, not eth1 which
doesn't look like it exists on his machine.
And I didn't note it
On Saturday 09 May 2020 16:51:48 Mark Wendt wrote:
> That's the default IPv6 address assigned to an unconfigured interface.
> As Peter pointed out, he needs to configure eth0, not eth1 which
> doesn't look like it exists on his machine.
>
And I didn't note it was eth1, all I saw in his /e/n/i was
That's the default IPv6 address assigned to an unconfigured interface. As
Peter pointed out, he needs to configure eth0, not eth1 which doesn't look
like it exists on his machine.
Mark
On Sat, May 9, 2020, 15:56 Gene Heskett
> > >> HM2_ETH<<
> > >>
> > >> auto eth1
>
gt;>
> >> To: "Enhanced Machine Controller (EMC)"
> >>
> >> Subject: [Emc-users] Trouble setting up a 7I80HD
> >>
> >> Starting with a fresh install of 2.7.14, 7I80HD, 2 of 7I29's.
> >>
> >> Jumper W2 has been changed on the
On Saturday 09 May 2020 12:46:56 Ed wrote:
> Starting with a fresh install of 2.7.14, 7I80HD, 2 of 7I29's.
>
> Jumper W2 has been changed on the 7i29's to show encoder signals. The
> LED's flicker as I turn the motors.
>
> I am using PNCconf menus to do the setup
>
> Using SV12 and the usual axis
On Sat, 9 May 2020, Ed wrote:
2: eth0: mtu 1500 qdisc pfifo_fast
you need to change your interfaces file to setup eth0 not eth1
Peter Wallace
Mesa Electronics
___
On 5/9/20 1:00 PM, Peter C. Wallace wrote:
On Sat, 9 May 2020, Ed wrote:
Date: Sat, 9 May 2020 11:46:56 -0500
From: Ed
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Trouble setting up a 7I80HD
Starting
On Sat, 9 May 2020, Ed wrote:
Date: Sat, 9 May 2020 11:46:56 -0500
From: Ed
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Trouble setting up a 7I80HD
Starting with a fresh install of 2.7.14, 7I80HD, 2 of 7I
Starting with a fresh install of 2.7.14, 7I80HD, 2 of 7I29's.
Jumper W2 has been changed on the 7i29's to show encoder signals. The
LED's flicker as I turn the motors.
I am using PNCconf menus to do the setup
Using SV12 and the usual axis and encoder assignments for a 3 axis and a
spindle
22 matches
Mail list logo
