On 9/29/2016 9:52 PM, Kirk Wallace wrote:
> On 09/29/2016 01:11 PM, Jim Craig wrote:
> ... snip
>> My machine uses NMTB30 tool holders so it would not be a direct fit. The
>> concept is good. I might try to replicate the mechanism. However the
>> wrist looks like it could be complicated to get
On 09/29/2016 01:11 PM, Jim Craig wrote:
... snip
> My machine uses NMTB30 tool holders so it would not be a direct fit. The
> concept is good. I might try to replicate the mechanism. However the
> wrist looks like it could be complicated to get that motion.
>
> Do you happen to have an exploded
On 9/29/2016 2:37 PM, Kirk Wallace wrote:
> On 09/29/2016 12:00 PM, Jim Craig wrote:
>> On 9/29/2016 1:02 PM, Kirk Wallace wrote:
>>> Just in case someone might be interested:
>>> http://www.ebay.com/itm/121734977870
>>>
>>> My slightly smaller ST-N as reference:
>>>
On 09/29/2016 12:00 PM, Jim Craig wrote:
> On 9/29/2016 1:02 PM, Kirk Wallace wrote:
>> Just in case someone might be interested:
>> http://www.ebay.com/itm/121734977870
>>
>> My slightly smaller ST-N as reference:
>> http://www.wallacecompany.com/machine_shop/Shizuoka/
>>
> That tool changer
On 9/29/2016 1:02 PM, Kirk Wallace wrote:
> Just in case someone might be interested:
> http://www.ebay.com/itm/121734977870
>
> My slightly smaller ST-N as reference:
> http://www.wallacecompany.com/machine_shop/Shizuoka/
>
That tool changer setup looks perfect for my machine. Do you have a
Just in case someone might be interested:
http://www.ebay.com/itm/121734977870
My slightly smaller ST-N as reference:
http://www.wallacecompany.com/machine_shop/Shizuoka/
--
Kirk Wallace
http://www.wallacecompany.com/machine_shop/
http://www.wallacecompany.com/E45/
