On Tuesday 24 July 2018 12:09:48 TJoseph Powderly wrote:
> Well the first attempts to use had lots of hangs,
> so i put the rpi in the 'ton yen' ( ice box)
> to see if it would run longer than 10 minutes.
>
> But,when I brought it out,
> it beaded up with so much,
> that I didnt try using it until
Well the first attempts to use had lots of hangs,
so i put the rpi in the 'ton yen' ( ice box)
to see if it would run longer than 10 minutes.
But,when I brought it out,
it beaded up with so much,
that I didnt try using it untill it was really dry again.
I found a big floor fan works well.
The unit
On 24 July 2018 at 09:30, Gene Heskett wrote:
>> they really need the cooling, its hot and humid here, rainy season ,
>> near 38C daily
>
> Ahh, then yes, lots of cooling.
Unless the heat-sink relies on sweating to work I very much doubt that
the humidity matters to the Pi.
In fact it probably h
On Monday 23 July 2018 23:58:02 TJoseph Powderly wrote:
> raspberry pi 3B+
>
> test notes:
> i added 3 heat sinks and have a full size floor floor fan focussed on
> it at max fan speed
I have the heat sink kit installed, and an old video card fan rigged to
blow on the sinks, no thermal probs, bu
On Mon, Jul 23, 2018 at 11:07 AM TJoseph Powderly wrote:
> wow
> thanks seb, looking at it now.
> "Index of /~buildmaster/dists/jessie/scratch-sim/binary-armhf"
> (I'm glad I didnt mangle the web page :-) )
What Arm hardware platform are you running LinuxCNC on? I'm just curious.
--
Sebastian
wow
thanks seb, looking at it now.
"Index of /~buildmaster/dists/jessie/scratch-sim/binary-armhf"
(I'm glad I didnt mangle the web page :-) )
tomp
On Mon, Jul 23, 2018 at 10:54 PM, Sebastian Kuzminsky <
seb.kuzmin...@gmail.com> wrote:
> On Sun, Jul 22, 2018 at 11:10 PM TJoseph Powderly
> wrote:
On Sun, Jul 22, 2018 at 11:10 PM TJoseph Powderly wrote:
>
> the page at
> http://buildbot.linuxcnc.org/
> lists an armhf build available for jessie scratch
>
> Jessie (uspace: realtime with RT-Preempt, and simulation)
> architectures: amd64, armhf, i386
>
> deb http://buildbot.linuxcnc.org/ j
On Monday 23 July 2018 01:09:29 TJoseph Powderly wrote:
> the page at
> http://buildbot.linuxcnc.org/
> lists an armhf build available for jessie scratch
>
> Jessie (uspace: realtime with RT-Preempt, and simulation)
> architectures: amd64, armhf, i386
>
Hi TomP; I am running that uspace build on a
the page at
http://buildbot.linuxcnc.org/
lists an armhf build available for jessie scratch
Jessie (uspace: realtime with RT-Preempt, and simulation)
architectures: amd64, armhf, i386
deb http://buildbot.linuxcnc.org/ jessie scratch-rtpreempt
deb-src http://buildbot.linuxcnc.org/ jessie scrat