Re: [Emc-users] crashing under 2.8.0-pre1

2017-05-11 Thread andy pugh
On 11 May 2017 at 03:34, Ralph Stirling wrote: > > Now I can debug the kins. Rtapi_print is giving me some > strange formatting. rtapi_print can't print floats. You get a weird hex-float. The solution might be to multiply by 1000 and print as an integer. (or even

Re: [Emc-users] crashing under 2.8.0-pre1

2017-05-10 Thread Ralph Stirling
, 2017 12:54 PM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] crashing under 2.8.0-pre1 On 05/10/2017 12:16 PM, Ralph Stirling wrote: > I have compiled 2.8.0-pre1 from source for a non-trivkins > project. I am using a Mesa 7I43 board. When I run linuxcnc > with software

Re: [Emc-users] crashing under 2.8.0-pre1

2017-05-10 Thread Sebastian Kuzminsky
On 05/10/2017 12:16 PM, Ralph Stirling wrote: > I have compiled 2.8.0-pre1 from source for a non-trivkins > project. I am using a Mesa 7I43 board. When I run linuxcnc > with software stepgens (no hostmot2), all is well. If I create > a plain-vanilla Mesa-based stepper configuration with

Re: [Emc-users] crashing under 2.8.0-pre1

2017-05-10 Thread Nicklas Karlsson
I have successfully used 2.8.0-pre1 for quite a long time. On Wed, 10 May 2017 18:16:48 + Ralph Stirling wrote: > I have compiled 2.8.0-pre1 from source for a non-trivkins > project. I am using a Mesa 7I43 board. When I run linuxcnc > with software stepgens

[Emc-users] crashing under 2.8.0-pre1

2017-05-10 Thread Ralph Stirling
I have compiled 2.8.0-pre1 from source for a non-trivkins project. I am using a Mesa 7I43 board. When I run linuxcnc with software stepgens (no hostmot2), all is well. If I create a plain-vanilla Mesa-based stepper configuration with pncconf, the computer crashes during startup of linuxcnc and