I' slowly working on a USB pendant. All the data both directions will go
over a virtual serial port and USB. I'm pretty sure you can buy a serial
interface pendant, in fact that is how most of them work
On Sun, Feb 23, 2020 at 7:26 AM Ed wrote:
> Is there an easy way to add encoder inputs on
--
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: February-24-20 11:31 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] looking to add inputs on Pico setup
>
> On Sun, 23 Feb 2020 at 15:26, Ed wrote:
>
> > Is there an easy way to add enc
On Sun, 23 Feb 2020 at 15:26, Ed wrote:
> Is there an easy way to add encoder inputs on a 4 axis Pico Systems
> setup? Hopefully without giving up I/O.
Maybe one of the USB pendants? Or possibly an Arduino (
https://emergent.unpythonic.net/01198594294 )
--
atp
"A motorcycle is a bicycle with
On 02/23/2020 09:24 AM, Ed wrote:
Is there an easy way to add encoder inputs on a 4 axis
Pico Systems setup? Hopefully without giving up I/O.
Specifically adding a hand wheel and to select feed rate
and spindle speed.
No easy way to do that. On one of my machines I have no
additional
Is there an easy way to add encoder inputs on a 4 axis Pico Systems
setup? Hopefully without giving up I/O.
Specifically adding a hand wheel and to select feed rate and spindle speed.
Thanks, Ed.
___
Emc-users mailing list
