On Friday, March 18, 2011 03:30:39 PM dave did opine:
> On Fri, 2011-03-18 at 15:04 +, andy pugh wrote:
> > On 18 March 2011 14:56, gene heskett wrote:
> > > See the users manual, section on G64 P usage, it allows you to
> > > specify the accuracy of such a followed path.
> >
> > sxazI think
Avoiding hitting the work or tooling or whatever is on the table
Maybe time got g0 got an extra parameter for exact moves
Dave Caroline
On Fri, Mar 18, 2011 at 4:05 PM, andy pugh wrote:
> On 18 March 2011 15:23, Stuart Stevenson wrote:
>> if the g64 p only works for g01 moves and you still wan
On 18 March 2011 15:23, Stuart Stevenson wrote:
> if the g64 p only works for g01 moves and you still want to use g00 then put
> a g04 dwell at the end of the g00 line
I confess I am at a loss to think why you would want exact-path rapids.
--
atp
"Torque wrenches are for the obedience of fools
I use the following idiom
G4 p0
It guarantees a properly cornered move
On Mar 18, 2011 10:25 AM, "Stuart Stevenson" wrote:
if the g64 p only works for g01 moves and you still want to use g00 then put
a g04 dwell at the end of the g00 line
On Fri, Mar 18, 2011 at 10:17 AM, dave wrote:
> On
if the g64 p only works for g01 moves and you still want to use g00 then put
a g04 dwell at the end of the g00 line
On Fri, Mar 18, 2011 at 10:17 AM, dave wrote:
> On Fri, 2011-03-18 at 15:04 +, andy pugh wrote:
> > On 18 March 2011 14:56, gene heskett wrote:
> >
> > > See the users manual,
On Fri, 2011-03-18 at 15:04 +, andy pugh wrote:
> On 18 March 2011 14:56, gene heskett wrote:
>
> > See the users manual, section on G64 P usage, it allows you to specify the
> > accuracy of such a followed path.
>
> sxazI think that might only work for G1 moves. If so, the solution might
>
On 18 March 2011 14:56, gene heskett wrote:
> See the users manual, section on G64 P usage, it allows you to specify the
> accuracy of such a followed path.
I think that might only work for G1 moves. If so, the solution might
be to use G1 with a very fast feed, rather than G0.
--
atp
"Torque w
http://linuxcnc.org/docview/html/gcode_main.html#sub:G61,-G61.1,-G64:
Regards,
Alex
- Original Message -
From: "Doug"
To: "'Enhanced Machine Controller (EMC)'"
Sent: Friday, March 18, 2011 4:45 PM
Subject: Re: [Emc-users] Gcode Question
> When I u
On Friday, March 18, 2011 10:55:12 AM Doug did opine:
> When I use two G0 rapid moves the program rounds the corner. How can a
> make a rapid move in a straight line in one axis and then when finished
> run another rapid move on another axis in a straight line. It runs
> straight and then curves
When I use two G0 rapid moves the program rounds the corner. How can a make
a rapid move in a straight line in one axis and then when finished run
another rapid move on another axis in a straight line. It runs straight and
then curves the end point to go into the second rapid. Is seems to look
a
On Saturday 10 April 2010, Chris Reynolds wrote:
>I have another gcode related question. Lets say I'm machining a one time
> part, say that I'm making a D-bit type cutter, and I've machined it
> already on the lathe and now I want to mill it down to the midpoint, and
> want to do it in .005" increm
Sounds like a good use of o-words
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Example_G-Code_Programs
On Sat, Apr 10, 2010 at 12:32 PM, Chris Reynolds
wrote:
> I have another gcode related question. Lets say I'm machining a one time
> part, say that I'm making a D-bit type cutter, and I've machi
12 matches
Mail list logo
