The controls on some of those smaller injection moulders was pretty
sophisticated even back in the day.
The shot control was the critical thing, assuming it has a proportional
hydraulic control valve on the ram. It was and still is very common to
run a pressure vs position curve on the ram as
I'd say the smallest touch panel you could get would be twice the price
of a good PC...
On 9/22/2015 12:25 PM, Karlsson & Wang wrote:
>> Hi Sven.
>> It is a small machine but in any case I suggest to you to use a plc in stead
>> on LCNC.
>> I mean it is possibile to do it even with LCNC but will
ClassicLadder is just as good as a PLC for this kind of machine...
On 9/22/2015 12:08 PM, Alex Chiosso wrote:
> Hi Sven.
> It is a small machine but in any case I suggest to you to use a plc in stead
> on LCNC.
> I mean it is possibile to do it even with LCNC but will be much difficult.
> I did m
> Hi Sven.
> It is a small machine but in any case I suggest to you to use a plc in stead
> on LCNC.
> I mean it is possibile to do it even with LCNC but will be much difficult.
> I did many injection molding machine retrofit (the electric and Electronic
> and software part) and a plc+hmi is the
